clutch

The 03-04 Cobras have this rubber surrounding the brake and clutch pedals, and I was wondering if anyone could tell me if you could reasonably expect some of the rubber to be missing around the pedals from wear on a Cobra with roughly 50k miles? How many miles does it usually take for that to...

First post here guys. I recently brought my brothers SVTPP Shelby in August and after a couple months, after the car warmed up, the clutch pedal would get very “crunchy”. It drove perfectly when it was cold. Everything else seems to be working fine, such as shifting through gears. That was all...

Hey guys! I snapped the Intermediate Shaft on my 2016 Mustang GT 6R80 Transmission and I was wondering the best course of action for building it back up! I'm putting down 722 RWHP / 549 Ft-Lbs of Torque and the stock trans lasted 2 months. This car is my Daily Driver so I want this bad Larry to...

Don't miss out on our 20% off Mcleod deal today! This sale is for today only and we will not be having any bonus day for this line!!! http://www.teambeefcakeracing.com/mcleod.html

i installed a oem cable, steeda aluminum quadrant and firewall adjuster few months ago and it was perfect at first but now its really hard to get into gears sometimes. first driven it shifts fine but after a while of driving its really hard to get into gears and if im at really high rpms like 5+...

Hi all, I've got a 2010 GT500 with about 60K miles on the car. I've been noticing a vibration that is both felt and extremely audible from outside of the vehicle. The noise is most prevalent in 3rd and 4th gear and usually at about 1800-2000 rpm under heavy load. I have only really noticed the...

Hi, I'm new here. Hoping to get some advice and opinions on what the issue might be with my transmission. My knowledge is limited. I learn things as I go, and this is my first manual car with its first tranny issue. 2013 Mustang 3.7, MT-82 Manual. Stock. 88k miles. Problem: Over the past 6...

Months ago I had my throwout bearing and clutch replaced (exedy stage 3), i ended up needing a flywheel too. after my mechanic got it all in, the car wouldn't go into gear, so i went and bought a new adjustable clutch cable, tightened the shit out of it and it went into gear. on my way home on...

I bought this vehicle just over 8 months ago with 20k miles. I got it from a guy up in Little Rock. He was the 4th owner & said it has a Spec Stage 3+ clutch & that he had replaced the TOB when he purchased it around 18k miles. When I picked it up I drove it 600 miles straight from Little Rock...

i just installed a oem ford clutch cable, steeda quadrant & firewall adjuster because my cable snapped at the plastic quadrant. the plastic piece looked to be the cause of the snapped cable, but not 100% on that im not a mechanic. after the install my clutch will not go into any gear after...

is their a method to taking these out? they are a huge pain and im bending it making it hard to pull out.

I need to replace the throwout bearing on my 96 Cobra, and while I'm at it I'll replace the pilot bearing and clutch, as well as rear main seal and transmission rear seal. I also plan to install a MM clutch cable kit with firewall adjuster and quadrant. I've already ordered a Ford Racing pilot...

I have a 96 Cobra convertible. There has been a slight squeak in the transmission that I assumed was a throwout bearing. Tonight it got much louder, and almost sounds like it's rattling. Here's a video: Here are my questions: 1. When I push lightly on the clutch pedal, I can feel it...

Selling a McLeod Street Extreme Clutch kit w/ Upgraded 26 spline. This is brand spankin' new, only taken out of box for pictures. Fits 86-Mid 01 GT's and 93-98 cobras. Handles up to 700 hp and 700 torque. Comes with pressure plate, clutch disc, throw-out bearing, and pilot tool. Works with T-45...

Hi everyone. I just bought a 1998 cobra a couple weeks ago and heres what happened this morning. Two days ago, the last time i drove it it was running perfectly. I go to drive it today and i am having issues. It seems like the clutch is slipping. Whenever i give it gas, the engine revs high...

Hello again! When I was at the shop a few weekends ago, my mechanic noticed a squeaking noise from the engine. We went ahead and bought some belt dressing at autozone because the car had been sitting for about 4 months while it was getting rebuilt. The squeaking continued... He then brought out...

Hey Guys, I am very new to these forums, this is my first post so bear with me. I am currently installing BBK Long Tubes on my 03 Cobra and I know NOW that I need to drop the K member. Well, I pulled the transmission out and got the Passenger side in. I'm realizing now that I might not be...

Clutch Decision Lethal Performance upgrades its blown GT350 with a McLeod Racing clutch By Steve Turner Combine the high-winding Voodoo 5.2-liter engine with a whiff on nitrous and it’s no surprise that you might find a fusible link in the driveline. In the case of Lethal Performance’s Shelby...

So I just put in a king cobra clutch a few hundred miles ago along with a steeda adjustable clutch cable and quadrant, with a UPR firewall adjuster. Now my clutch is grabbing at the very top of the pedal. Before I changed everything out it would grab about half way down. Does anyone know how I...

Hey guys, I really don't post much but I have a stock 03 Cobra that needs a new clutch and flywheel. I'm on a budget so thinking of going with the Ford Racing flywheel and unsure what type of clutch. Won't be doing much to the car for a while but would like to get it up and running. So any...

Took my trans out to do the clutch and now when I'm trying to put it back in the input shaft on the trans hits the ears on the pressure plate and the shifter nub won't go back in the hole up top. I'm using two floor jacks and a janky little trans jack but no matter which way I try and angle...

I had my local shop installed a Stage 3 Exedy clutch and trowout bearing in my 2011 Mustang GT 6M. The flywheel was just resurfaced. Anyways the car felt great for the first week as I went through the break in period, no issues at all. After the breaking period I was pushing the car a bit past...

For sale is a McLeod RXT Street Twin Disc Clutch 26 Spline, P/N: 6975-07M with a billet steel flywheel (feels better than stock). The clutch is only broken in, roughly 700 miles. I never installed it due to time constraints and the selling of my car. 1395$ new without a flywheel.. It is a...

Has anyone used a powertorque brand clutch kit in their car (Oreilly's brand)? Any Feedback on the quality? I get a good discount on them and when I looked them up there were 2 different options for my 96 Cobra. One was just a standard clutch kit, the second clutch kit said the disc was a dual...

Heavy Duty Installing McLeod’s RXT1200 clutch in an 800-plus-horsepower GT500 By Steve Turner Photos courtesy of VMP Performance The Shelby GT500 presents a daunting challenge for a clutch. These are heavy cars that produce tons of torque. When you bolt on a set of sticky tires, raise the rpm...