So i just bought a 1999 mustang GT that has a cobra motor put in it. I was driving it the other day and as i went to stop, i pushed the clutch in and upon doing that a popping noise came from the pedal and the clutch pedal went straight down to the floor. However the clutch pedal still had...
I was searching around to see what brake fluid guys are running to best serve the clutch as well as brakes because it seems like I have lost a little clutch pedal lately and shifts are not as smooth as they used to be . I found myself on a Camaro forum ,and to my surprise found a very good write...
I'm helping my dad install a T56 kit from DD Performance in his Vortec V-1 Blown 97 Cobra tomorrow.
I think the following torque specs are correct:
Flywheel to crank: 63 ft/lbs
Pressure plate to Flywheel: 33 ft/lbs + 60* of extra rotation
Transmission to bell housing: 55 ft/lbs...
I know this is all over the forums and it has been discussed MANY times!! but i would like to out my situation out here for some help and advice!
My car is a 2013 Boss 302 #1700, i've been through everything trying to shift this car the correct way.... I have Sr stainless clutch, MGW Race spec...
Hello. This is my 3rd Terminator, 26k miles i've only put on about 1,000 since i purchased a month ago. Not sure of clutch neither was previous owner but has a aftermarket adjustable cable and microclick firewall adjuster and quadrant. All miles i've put on was 400 driving it home, our annual...
So I purchased my 10th anniversary silver cobra convertible from Hi-end auto about a year and a half ago. I love it but it doesn't seem to feel the same way about me because it is killing any real chance of living happily together. Long story short, this week will be the 3rd clutch I have...
Looking for T56 with bell, Drive shaft for solid rear and cross member. If the t56 has a 26 spline input will also need clutch setup for 8 bolt crank. I will pay all the shipping to Ontario CANADA.
Hello, I recently became the owner of a 2001 Cobra Convertible with 74k miles! It has been put up for awhile so I am having to get everything in tip top shape. The engine is running car drives and everything, however there are a few things that catch my eye and I was wanting to ask the masses...
clutch and cable is stock, made a few hard pulls, now something happened and i dont know what it is, so any cobra experts out there please help. basically the clutch barely engages, i have too practically almost completly release the clutch to get the car moving, and at some stop light i can...
FS/FT McLeod Super Street 26 Spline Clutch and Flywheel
I have a 26 spline McLeod Super street clutch and pressure plate with just under 8k miles on them, meant to hold up to 500hp... Also have an 8 bolt lightened 03 cobra flywheel (aftermarket not sure what brand but made in USA), needs to be...
Hey guy I just got done putting a a new clutch and transmission and I'm trying to adjust the clutch I tried adjusting it like the mm web site said but is not working the clutch pedal is harder to push and dose not engage until the pedal is all the way out and I'm not sure which way to turn it...
Hey everyone how ya'll doin? I have a question for you guys out there. It's been a while since I've posted, I'm still a newbie but I got caught up with life. Anyways I have a 99 Cobra and had the clutch replaced in February. I had slipping issues which went away. As soon as I got my clutch...
I have a t-45 tranny freshly rebuilt around 2500 miles on it, Also a PST Carbon fiber drive shaft along with a Centerforce - Dual friction Clutch cover and disc with around 250 miles on the clutch, This set up worked great for me, But I am going with the t-56 swap, I would take advantage of this...
Hey Guys! I'm selling a Spec Stage 1 clutch and aluminum flywheel for the late 01-04 Mustang GT, 03-04 Mach 1, and 99-04 Cobra which in other terms means the kit is compatible with T-45, TR3650, and T-56 transmissions. I bought it with the intent of using it as a replacement for my stock clutch...
Hi SVTP,
I was hoping some of you could chime in with your expertise. I don't know much if anything about cars, so any help is appreciated.
Issue: Can't get the car in gear, while running. If the car is off, I can put it in any gear and even start the car in 2nd and drive it. Ran it on a...
My Car is driving me insane.... let me explain why, a couple weekends ago I heard a squealing (if you will) near the bottom of my car. I was able to pin point it to the transmission. The "squealing" would go away once i touched/put pressure on the clutch pedal. I was told this was the TOB (throw...
Finally got my rebuild working 100%! Pushing 301rwhp and 297rwtq. Got everything tuned on 93 octane, nearing 600 miles on the engine. I was very happy with everything until a couple days ago. 2nd-3rd gear started grind "ONLY" while shifting into them :fm:. They randomly grind when its cold, and...
So me and a few other friends of mine installed the RXT clutch and flywheel from McLeod and after driving it for a day or so my Check engine light came on and then went away and a few minutes later it was back and my engine bogged down until the check light stopped flashing and then i would get...
Hello,
I picked up a 1994 Cobra about 7 months ago. When I bought the car the owner said it needed a clutch, and that the pedal let out extremely high.
A new clutch was put in and the pedal released near the median of the pedal's travel. That only lasted for about 50 miles before it started...
Alright so I have had an issue after changing the clutch in my mach a few weeks ago. It clicks. As long as I do NOT have the clutch pedal pressed in the transmission sounds fine. After pressing the pedal in after about 5 seconds this horrible clacking noise starts up. It is definitely something...
I have a 2004 Mach 1 with 94xxx on it and I am having some serious issues I need fixed asap.
I had the clutch changed in my car about 2 weeks ago and when I got it back it clicked. When I have the clutch pedal pressed it would make this sort of clacking noise. Took it to the shop, they...
Hey guys so here's the problem..I own a 2007 Manual GT and absolutely love it. But I am a short guy lol and compared to the other vehicles I have had, the pedals are a lot deeper and it is hard for me to engage the clutch comfortably without having my knees literally touching the dash. The...
Hey Guys, I have a brand new SPEC stage 1 clutch for mid 01-04 Mustang GTs, Mach 1, and 99-04 Cobra that I'm looking to sell. I bought it new from AmericanMuscle.com, and I'm selling it to get a heavier duty clutch.
I'm asking 250 for it, contact me if you have questions or you are...
Bassani catback for sale or trade for another catback - 400 OBO
Lt grey 03 cobra seats-mint cond.-trade for charcoal cobra seats
Ram powergrip 26 spline clutch-150 OBO