clutch

Ram Powergrip clutch 26 spline, great shape low mileage 175 obo Pm me text or call 817-776-7868

I got the tsb clutch install about a year and a half ago. I don't know for sure what they put in there but i think its a 2010 clutch. I recently upgraded power mods and am schedule for a dyno. I know it's gonna slip hopefully not explode and I need to upgrade. Question is can I get an...

I have been lurking for a while but i wanted to share/compare my experience with others. I have a 2012 5.0 M6 and have had mild issues with the 1-2 shift feeling crunchy and unsatisfying. i have done the normal Redline MTL in the transmission, Steeda shifter bushing and SR shifter(so so...

I'm ready to order my new clutch kit. What should i go with. I'm running stock right now.

i am going to replace my clutch kit. any suggestions?

Drivetrain issue! Ok so i have an 03 cobra with a solid axle swap (bought the car like this) and the stock t-56 6 speed i noticed when banging gears/ racing there would be like a looooong like 1 sec gap between shifts like its delayed to grab the next gear even though i had the clutch out and...

Ok i just bought an 03 cobra from a dealer yesterday and it was pretty worked, 2.3 whipple SRA swap ect ect. The issue is getting moving from a stop, its nearly impossible bc 1. It just spins the 315 nittos liike there made of butter 2. it wants to stall if i dont rev it up which in turn leads...

I had my '03 Cobra at the track a few weeks back and I began missing gears going down the 1/4 mile. This wasn't the first time I had been at the track and something didn't seem right. At the end of my last run, I had downshifted into 2nd to make my way back to the speed shack to get my time...

Currently the T-56 is being gone through at Liberty Gears and will be fully inspected. The T-56 was built by Liberty with a 26 spline input and 31 upgraded spline output. 1st through 4th gears have been cyro treated and shot peened. Includes NEW Ford Rscing throwout bearing, trans mount and MGW...

I have a few clutches and flywheels for a 99-04 2v manual. Prices arent firm, txt for pics. 918-859-6565 Stock 02 GT Clutch w/ 16k miles: $100 + shipping Stock 02 GT Flywheel w/ 16k miles: $50 + shipping, needs to be resurfaced Stock 00 GT Flywheel w/ 95k miles: $50 + shipping, needs to...

TOB is starting to sqeal......i see this as a common problem on the 03-04 cobras...mines an 04 with about 63xxx miles on it so, looks like its that time. im thinking FRPP TOB but not sure what clutch i want, previous owner bought a stedda adj clutch quad, dont know if it was installed. also, i...

This is weird. I had been having issues with shifting my transmission so yesterday I pulled the clutch fork cover off and adjusted my clutch cable tighter, it made a world of difference. Today I was jumping on the highway and along came a brand new Gt500 so I gave a rev and a wave to the older...

New SVTF owner here. I'm 400 miles from home and a plastic linkage to my clutch pedal broke. http://www.flickr.com/photos/76410871@N07/6857467091/ It connects onto a bolt/nipple on the clutch pedal and goes down into this guy: http://www.flickr.com/photos/76410871@N07/6857466575/ You can see...

Have a BNIB 26 spline Mcleod RXT Street Twin Disk up for grabs, does not include flywheel. Kit number is 6932-07, retails for $900. Fitment guide states it will fit FORD 2001.5-2010 V8 ; Modular 4.6/5.4 Motors, and will support 1000hp. No longer need this for my application, looking to get $650...

This clutch only has 300 miles on it and it has not seen boost yet. Its not even broken in yet, but has butter smooth engagement and light pedal pressure. Get the best. Lethal Performance is selling this clutch for $699.95. I'm asking $475 plus shipping. Mcleod 99-04 Mustang RST Street...

So this is the first time post and Ive got a question usally the search feature works wonders for me but my problem is that my fourth clutch in two years has started to slip and it was just installed 2 months ago. When installed i went back to a factory cable and MM quad I also installed a new...

So These are the parts I have ordered while I was on deployment and are waiting for me to install when I get back: - Energy Suspension HyperFlex Polyurethane Motor Mounts - Kooks 1 3/4" x 1 7/8" Stepped Headers w/3" Collector - Kooks 3" Inlet w/3" Tubing 2.5" Outlet Offroad XPipe - Lethal...

What's up everyone? I'm having some clutch slipping issues. The car is a 2003 Cobra with a Whipple 3.5L, Stage 3 Cam shafts, JLT CAI and full exhaust. The clutch slips with too much throttle. I was wondering what clutch you would recommend for 600+ HP? And also I'm hearing clicking coming from...

I have an 03 10th Anni. Conv. I had it dyno'd at 440rwhp and 444tq. I am getting a lot of slippage and chatter when taking off from a stop. When i put my foot into it in higher gears it revs more than it accelerates and i get a nice wiff of burning clutch. I also can hear a squeak that when...

86-01 Mustangs Centerforce Dual Friction Clutch Pressure Plate and Disc Model DF161057 I bought this for a project that I never got around to finishing. My loss is your gain. $290 shipped to your door Retail is a nearly $700 with the best price I could find on sale being around...

Hey guys my name is Justin. I recently bought my wife a 2003 Cobra since her 2000 cobra clone burnt to the ground and i have a few questions. The car is all stock with the exception of the magnaflow catback exhaust. The car also came with a 2.8 pulley and the diablotek predator tuner. I guess...

I'm cleaning out my closet with parts that are just laying there. Clutch, Flywheel and Input shaft have 27k miles on it. Only 10k miles Eaton pullied, and 1k mile of TS action. A few things are Brand New. Everything else works well and in good condition. 1) JLT RAI Heat...

I am looking for the best bang for the buck aluminum flywheel for my 03 cobra. i was gonna get either the fidanza- Fidanza Flywheel - Aluminum FORD MUSTANG GT; BULLITT; MACH 1; COBRA 1996 - 2004 4.6 186481 or the ram- 1996-11 Mustang Ram Billet Aluminum Flywheel, 8 Bolt at LRS - Same Day...

I was wondering if anyone was running a hydraulic throwout bearing setup. Seems like with all the throwout bearing failures and clutch cable adjustment problems that these would become a popular upgrade on our cars. Hadn't seen any threads on these. Interested in information from those familiar...

Hey guys any help would be greatly appreciated. I have a vibration above 3000rpm especially noticeable in 5 gear around 85mph. Car has also had a loose feeling coming from the rear. Ive had it up in the air checking it over and over for play and loose parts. I did find the rear sway bar link...