Hey guys any help would be greatly appreciated. I have a vibration above 3000rpm especially noticeable in 5 gear around 85mph. Car has also had a loose feeling coming from the rear. Ive had it up in the air checking it over and over for play and loose parts. I did find the rear sway bar link...
I recently had a new clutch installed which is a mcloed rst twin disc. I have put the 500 miles on the clutch to break it in as instructed. I think something is not right with it. I feel like there is a vibration in the car I have not noticed before the new clutch especially under power and at...
I am in the process of getting my new Mcloed twin disc clutch installed. I have the factory aluminum flywheel and a steel aftermarket flywheel at the machine shop getting resurfaced. Which flywheel should I have installed on the car. I would say 650hp would be the most I would ever make with...
The post quoted below is an update from the following post http://www.svtperformance.com/forums/driveline-216/701287-ford-states-new-stock-clutch-chatter-ok.html
I decided a new post may be needed as so much has changed that the previous post's subject no longer applied.
The...
sct ba3000 maf,
diablosport mafia,
coolant hose going from back of passenger side head to heater core on 96-98, 96-98 throttle cable,
t56 tranny, t56 crossmember, tranny harness, 03/04 driveshaft, and anything else that i would need to swap a t56 into an '04 gt,
stock 03/04 flywheel or...
So my 97 Cobra's transmission is slowly starting to die. I'd posted this a while back, and since have taken it to a transmission shop where they've confirmed the transmission is not in good shape. Long story short, I need some advice.
The local transmission shop said they can get a...
Hello all! I just joined the forum, really really informative site, love the info I have seen. I credit this board with convincing me to keep my 97 cobra, as I see the potential they have. So, I just pulled the trigger on a $1550 job on my rear end, and I need a clutch! I have seen a number...
Guys, I'm going to be buying a clutch set up and all supporting hardware and have it installed over Christmas break.
Am I forgetting anything that I need? Or is there something y'all recommend or don't recommend?
Here is what I plan on ordering (thanks Joe for the list), let me know if...
I recently had a new Sachs (OEM spec.) clutch kit (Disc, PP, TOB & Pilot Bearing) installed on my 02 GT due to a bad TOB. The flywheel had also been resurfaced. The Clutch engaged without a flaw for about a month. I am now having a shimmy/vibration that moderately shakes the entire car after the...
i have a 98 cobra with a t56 i just replaced the clutch throww out bearing and pressureplate and got everything set up and my pedal it really hard to push in. i keep tring to adjust it but its still hard or either real lose it wont go into gear when i start it if i try it goes forward a little...
heyyy guys my throwout bearing went out the other day and i bought my car with a tremec 6 speed in it and i dont know what kind of clutch it takes any help are they different then in a t-45
I have the following for sale as a PACKAGE.
This package will allow any 96-98 Cobra to upgrade to the 11" clutch package that is standard on the 99-01 Cobra.
(1) Ford 11" steel flywheel, new take-off condition
(1) Ford/Valeo 11" Cobra clutch, new take-off condition
(1) Ford/Valeo 11"...
Alright,
I just bought a 1997 Mustang Cobra. Still trying to get a grasp on what if anything is wrong with it. Seems in good condition, but one of the things I've noticed has to do with the clutch or transmission. It's got a Centerforce Dual friction clutch and a relatively new transmission...
Ok so about 8k miles ago, I got my clutch replaced with a dual friction king cobra clutch with a chromoly flywheel. Last night I went out racing, and did harp on the clutch. On my way home, I noticed that the clutch was slipping really bad when I pressed the pedal more than a 1/4 of the way. The...