Search results

Are the 2003-2004 COBRA Front Brake Calipers specific to just the 03-04 COBRA?? Or were the same exact COBRA Calipers used on the previous years?

I'm currently running SLP Long Tubes because that's what the car had on it when I bought it a couple of years ago. They sound great and have no leaks. My buddy is looking to buy some Long Tubes and we are both wondering what's the advantages of spending double the money and buying ARH or...

I've had my 03' Cobra for almost 2 years now and put about 1,800 miles on it without a single problem. Yesterday I went to drive it and the battery was stone cold dead. So I charged the battery over night and just went to start it tonight and it turns over a hundred times, but just won't...

I've had the car for 1.5 years and I can't stand to deal with the RASPY SLP LM2's anymore! Looking for some ideas/suggestions on Mufflers that will tone the noise down and have a deeper mild tone. HATE THE RASPY SOUND! I just wanna change out the Mufflers...not the whole Cat-Back. That...

I know our cars were nick named "TERMINATOR" from the beginning of it's creation (John Coletti), but I didn't know that the factory actually labeled parts/stickers with that on them. I was aware that the COBRA side scoop inserts say "TERMINATOR" on the backside, but that's all I knew about...

Is there any real advantages to using an aftermarket bigger reservoir like the Moroso or LFP ones?? I stumbled upon a good deal on a LFP Black H/E Coolant Tank but not sure if I wanna install it? The stock tank sits alot lower and I feel looks better. I'm just torn about installing this if...

Need some good recommendations on where to buy a QUALITY Shift Knob. I bought one from CJ's Pony Parts and sent it right back! Total piece of garbage that stripped out during install and plus the Ball was very cheap feeling! Thin plastic BS. I want a nice Solid Ball Knob. NO JUNK. Let me...

My 03' Cobra has the Green Coolant in it. Don't know if it's the Factory Ford stuff or not. I'm gonna be doing a FULL Coolant Service to both my Engine and Intercooler Coolant Systems. The Owners Manual and a lot of other areas say to ONLY use the Factory Ford stuff. Is that because they...

I wanna change out my air filter and want some input. I currently have the JLT in the fender CAI. The filter is a few years old and I don't wanna wash it, clean it, oil it. Just wanna buy a new one. Which filter do you guys recommend? DRY or OILED?? And why? Thanks

Just bought New Mickey Thompson Drag Radials for the Cobra. Now I wanna order some Front Tires. I'm wondering what you guys are using and what are some good recommendations with similar tread pattern as the Mickey's. My car is 100% street car and I only drive it about 1,500 miles a year...

After kicking around the idea of ordering some Metco's, I've finally decided on the Double Bearing Idlers. Singles seem to be just fine, but personally it just makes the most sense to get the best ones since I'm gonna be there tearing the old ones off. Car still has the Eaton with a 2.8 Upper...

Debating whether or not to spend the money and buy the Metco Double Bearing Kit for my car. I'm only running the Stock Eaton with a 2.8 upper. Is it worth spending $450 for these kits, or should I invest the money elsewhere? Stock pulleys have 47,000 miles on them. Let me know what your...

Stupid question but I need to know. Bought my 03' Cobra back in February. Inspection runs out this month and need to get it inspected. Car has a SCT 3 with tune. Guy told me the car won't pass inspection until I put it back to stock tune. Well now it's time for inspection and I don't know...

Anybody have a decent one for sale? Looking to buy a nice one. No junk. Let me know

Hey guys just getting my Christmas List ideas all lined up. I was looking into getting these Coolant Expansion Tanks. How's the quality and do you guys recommend them? Also any noticeable temperature drops on the Charge Temp with the Intercooler Tank? Thanks

What's a good range to be in with my Charge Temps? I'm monitoring with Aeroforces and I'm using the (Charge Temp) PID. There are options for (IAT1) and (IAT2) Should I be using one of them instead?? The highest I've seen using (Charge Temp) was 130*. *Ambient Temp was around 80* Which one...

Over the weekend I installed my Aeroforce Gauges. Here's a pic but I just had one question...for now. When I start the car only one of the gauges power on...and I have to press a button on the second gauge for it to power on. Is this common? Or is there a setting? Thanks in advance

I'll start it off with mine...

Hey guys....I just recently received my Dual Aeroforce Gauge Set-Up. Haven't had time to install them yet but had a quick question. With this purchase I also bought the Oil Pressure Sensor Kit. Before I go thru the troubles of running wires and hooking this Sensor up, will these Aeroforce...

Hey guys I just purchased the Aerforce Dual Gauge set-up...It's on its way and should be here by the weekend hopefully. With that I also purchased an Oil Pressure Sensor Kit. I haven't crawled under the car to see where I'm gonna install this new sensor. So before I do, I'm wondering where...

So i just ordered the DUAL Aeroforce Gauge Set-Up. Super pumped but looking for some info on Pillar Mounts. I DO NOT wanna drill into my factory Cobra pillar to mount on top. Is there anyone that sells a one-piece pillar with dual gauge set-up that i can just take my factory pillar out and...

Thinking about getting an AeroForce Gauge. Do you think these are worth it and what's your opinion on these?? Thanks

So while driving my 03' with the windows down, I notice a high pitched squeak on almost every bump I hit. Is there some kind of fix OR knowledge of this noise and have you guys ever experienced it? Is it in the front suspension or is there any known issues of these squeaks or is it just my car...

I just wanted a quick answer on some must needed parts when installing a new Whipple 2.3.....I just bought my car a couple months ago and it has the stock Eaton w/ 2.8 pulley. Car currently has 46,700 Miles on the Clock. It runs good enough for my needs, but I love how nice that Whipple looks...

Haven't owned the car too long but this was like this when I bought it. I'm just wondering should there be a vacuum line or something hooked up on the Actuator where I pointed the RED Arrow? Car runs fine and I have no Check Engine Lights or Weird Idle etc. Car does have multiple vacuum lines...