Hey guys I just purchased the Aerforce Dual Gauge set-up...It's on its way and should be here by the weekend hopefully. With that I also purchased an Oil Pressure Sensor Kit. I haven't crawled under the car to see where I'm gonna install this new sensor. So before I do, I'm wondering where you experienced guys installed yours? Thanks
Oil Pressure Sensor Question
- Thread starter 93VORTECH
- Start date
You can T off the stock oil pressure sending unit. I believe its a 1/4 npt
this is what I used on my Mach (Im assuming the terminators have an extra port already as well)
make sure you dont get a compression fitting by accident, it will NOT seal!
I also got some liquid thread sealant and let it set up for a few minutes before installing.
lastly, do NOT overtighten! If you do like my and try snug the hell out of it you crack the housing.
make sure you dont get a compression fitting by accident, it will NOT seal!
I also got some liquid thread sealant and let it set up for a few minutes before installing.
lastly, do NOT overtighten! If you do like my and try snug the hell out of it you crack the housing.
Users who are viewing this thread
