Search results

1996 Cobra original everything except tranny (26spline T45source tranny) 128000 miles BBK CAI RAM Aluminum Flywheel FRPP Aluminum Driveshaft Short Runner intake MMR IMRC delete plates Accufab single blade TB BBK LTs o/r X Magnapacks 302rwhp 280tq what yall think for the mileage i thought not bad!

1996 Mustang Cobra BLACK/BLACK Car has full exhaust BBK LTs, Lethal performance o/r Xpipe with MILs, MAGNAPACK catback BBK CAI Short Runner Intake Accufab Single port Throttle Body 4.10s Aluminum Flywheel Aluminum Drive Shaft BAMA SCT x3 tuner MGW short throw shifter T-45 from ZaK at the...

I have a nice clunking/clicking noise coming from the front suspension of my cobra, i can feel it in my pedal I just fixed a broken sway bar end link on the driver side and also replaced passenger side. Car has Bilsteins all around (installed in the fall 2013) Brakes and rotors (installed in...

as the title says, i just took it off the other day, reason being i purchased a Short Runner intake off SVT a while ago and just found the time to do the install now. i guess im gonna look for about 200$ for the intake, again its completely stock never touched and nothing wrong with it! PM me...

Okay boys ive started breaking down my intake and what not to install the SRI and imrc delete plates ive had laying around for a year now ive gotten every bolt out except for the front 2 that are under the bracket for the coolant cross over tube... Do i have to remove that tube to get the...

This coming friday the 7th of February I will be purchasing a Ford F-350 Turbo Diesel crew cab 6 3/4 bed ect... The dealership told me that they will not register the car as passenger for me but after the purchase i can go to a DMV and change the registration from Commercial to Passenger...

Okay for the technology friendly guys here, I have a HTC Android Incredible first generation i think... i went to an Iphone 5 about a year and a month ago after the androids screen cracked well enough that i couldn't view anything on the screen any more... so it has sat in a drawer and ive maybe...

Ive done the search and ive come up with that on a 96 cobra you should run a wet system and that pretty much ZEX and NX are really good brands... but i have other questions i wasn't able to have answered via search 1. Will i have to upgrade MAF? 2. Will i have to upgrade Fuel Injectors? 3. Are...

Hey all, i have a 96 Cobra and when im driving i can hear a squeaking like the rotors are shot, so i did some tests to step on the breaks and the noise seemed to stop when i did that so i went out and got some nice new slotted rotors and new Pads and the noise is still there! i had the...

So m starter i have now is shot, so i'd like to replace it with a mini starter, any one recommend a good brand starter? 96 Cobra t-45 tranny

Okay so i drove the car all day yesterday no issues what so ever... go to start it today and bothing happens literaly Everything works fine, radio windows A/C ect, except when i press the clutch down and turn the key to start the motor nothing happens and the theft light just flashes alot...

The ride of my cobra is HORRID, i got FLSC that im getting installed this week but i also want to re-do theshocks and struts and eliminate the quads (gonna do the upper and lower control arms this winter, so my question is as far as struts and shocks go, will ANY 96-98 shock set up fit a cobra...

Well my current shocks struts and spring set up is deplorable to say the least... I believe i have Eibach Sport Pro springs some type of KYB strut/shock combo im not 100% sure of The ride is SUCKY! car bounces all over the place, makes weird noises and just doesn't feel right at all SO my...

SCT vs Diablo vs who ever else makes one On American Muscle if i order an SCT which model tuner should i order? Also if i wanted just a pre canned tune to hold me over till i hit a real local dyno tuner, is Bama a good choice?

Well Id just like to say first i have a clean driving record! (not that it matters) Coming home tonight i ran into a clean Fox body GT, we are keeping it calm and we both get to a red light im behind him and cars in the lane next to me, light turns green and he gives it a little so i can get...

For the down stream set of o2s does it matter where they are located? My new midpipe i need to weld in 2 new o2 bungs cuz the spot where they are now hits my cross member

I just had LongTubes o/r X and Magnapacks put on my 96 Cobra The Passanger Side Exhaust tip is perfectly Fine, nice and tight doesn't move at all, the Driver side tip on the other hand is VERY loose I noticed while driving just after install that there was a pretty damn loud metal clanging...

as the title says i want a short runner intake for my 96 cobra

well went out this morning will my buddy and his new 13' WRX (awesome machine!) On our way back a gorgeous SVT lightning pulled up next to me and goosed the throttle for some reason i didn't think to slow down so we can do the pull from my 2nd gear instead we did the pull from the meat of my...

Hey here is my situation im like 2 months over due on my inspection for the car... I had a bunch of codes and i fixed all of them except for a lean bank 2 code and i know the car has an exhaust leak before the up stream 02 sensor and i already checked all vacuum lines and everything after the...

P0174 P0136 P0156 96' Cobra BBK CAI O/R X pipe MIL Eliminators Flowmaster catback gears blah blah blah but the first 3 mods are the only ones that can possibly throw codes so if any one here knows a bit about this electrical sensor non sense any help would be greatly appreciated

Am i the only one? or do these things just flat out suck? i have a stock manifolds off road X pipe 96 Cobra and im on my second pair of these SVE MIL eliminators and i can't shake the CEL and i have had the codes pulled plenty of times and all the codes are for the rear 2 02 sensors... to make...

need for 96-97 cobra, PM me

any one have issues running a 17x10.5 rim with a 315x35 tire and either SLP or Magnapack catback? im upgrading soon to both those rims and either exhaust system once my longtubes and mid pipe get done, the drone from dumps are awful. i just want to know if ill have any clearance issues

I'm on the verge of purchasing MAC longtubes for my 96 cobra, but i noticed that MAC does not make a X-pipe for 96 cobra's and i really crave that Xpipe sound over the Hpipe and prochamber... If i were to purchase a Dr. Gas universal Xpipe kit could a shop fab me an Xpipe for a reasonable price?