Search results

Hey guys, my car started making this ticking/tapping noise the other day. It sounds like it is coming from the passenger side in front of the motor. Aside from the noise the A/C stopped working as well. I was thinking or hoping that it could be a pully gone bad but I'm really not sure...

I starting hearing a new noise lately. First I was hearing it when turning slow and now I hear it when slowing down to a light as well. As you see in the video, all I have to do is pull up on the car slightly to make the noise. I'm not sure if this is a suspension issue or maybe the axle...

I have a Steeda quadrant and firewall adjuster with an OEM style non adjustable clutch cable. I've heard that there should be a dime size gap about 1/8 of an inch where the cable and adjuster meet. My question is this true and should the cable have any in and out play in the firewall adjuster?

Anyone know if the empty or "not used" fuse slots have power in the fuse box? And if the slot marked "convertible top switch" would have power since I have a coupe. I'm looking to tap into the box for an ipod adapter for the radio and I'm trying to find the best spot.

I tried the search function with no luck. My headlights are getting hazy and I wanted to replace them with the ones from American Muscle. Just the stock replacements and not the dark smoked ones. I have heard about some people having fitment issues and wanted to see if anyone that has them...

I'm looking to replace my drive belt with a Gatorback and I'm not sure what length I need. I have replaced the stock idlers with billet-flows (Three 92mm)and have the stock tensioner. The stocks are 90mm each so the additional 6mm is about .25 of an inch making the belt total length needed at...

I want to buy a vent filter for the passenger side valve cover and needed to know the size that I need to get. I already purchased a K&N screw in but but didn't realize at the time that it was made to screw into the oil filler hole. Does anyone know the size of the inlet hole on the passenger...

A rock must have cracked one of my fog lights so I'm looking to got another set of lights but I'm not looking to paid the high price for the OEM from Ford. Does anyone have suggestions on where I should be looking. I see these on Ebay 2003 2004 FORD MUSTANG COBRA SMOKE FOG LIGHTS+BULB L+R -...

Does anyone know what the minimum and maximum PSI that the PVC system creates? I am looking to put a one way check valve on the passenger side valve cover to the air inlet pipe.

For some reason every time I go to the part store they never have what I'm looking for. It not just one store I'll go to Autobarn then Advanced Auto then Autozone and they all stink. I went to Advanced today and they had 7 people working, 4 behind the counter and there all talking to each...

I wanted to know if I would need to get another length belt if I change out all three idlers on my 03 Cobra, to the billet flow 92mm pieces (BF-92IDLERPULLEY). The stocks are 90mm and the BF are 92mm which is about 1/4 of an inch.

This is an really easy job to do. I though that I would do a little write up on it. This was an annoying noise. Every time I hit a bump I would here a clank. Here is the noise before the fix. So here it goes. This is all the you need. The hook is not necessary but I used it to spin...

Tweedy is chirping away under my hood. Sounds like one of the idlers is on there way out. I was looking at billetflow or Lightning Performance idler pulleys to replace the stocks. I have the stock supercharger pulley on there so I don't need an extra idler at this point. My question is do I...

Anyone recommend a good brand of injector cleaner to use?

Every time I go from one page to the next on here, I get the "Congratulations you've won" ad pop up.. It somewhat annoying. Is anyone else have this and is there any way to shut it off?

I just read the Poop story and it reminded me of this funny story that I read a while back. This may be a repost but still funny.:shrug: - - - - - Taser lesson...A must READ! Just try reading this without laughing till you cry!!! Pocket Taser Stun Gun, a great gift for the...

I'm going to change the fuel filter and was wondering. If I have the car on and press the fuel cutoff switch so the car dies from lack of fuel, is this bad for the engine?

One of the clips on my driver side scoop doesn't seem to be sitting in all the way. I tried to push the scoop in but it doesn't seem to catch the clip and there is a slight gap (1/4 inch) between the scoop and the fender. I will be taking the scoop off and wanted to know if anyone knows where...

Today I tried to figure out the noise that is coming from my front wheel every time I hit a bump. Its been awhile since I have messed with brakes so can anyone tell me what the next step should be. I took some pictures and a short video of the noise. Does it look like all the correct pieces...

Short story. I'm beginning to really get to the point of disliking my car. Today after work I started my car, drove about 3 minutes and parked the car to go into a store. Spent 20 minutes inside, came out started the car, idled for about 30-45 seconds, wife was cold so I turned the heat on...

Does anyone know what the interior size of this breather tube is? I want to get a one way check valve (3/8" Kynar® Standard Check Valves | U.S. Plastic Corp.) and splice it into this tube but I'm not sure what size to get. 3/8" or 1/4" . . . . .

My car lately has a rough idle and I want to try to smooth it out. The car has 34k miles. I have already changed the plugs to the NKG TR6 (copper) #4177 plugs. All of the plugs that I pulled out looked ok with no sings excess ware (oil or gas). I have changed the coils yet though. In the...

My car was idling ruff so I changed the plugs today and this is how the intake looked like. Is having this oil in here normal for these cars.

I change the plugs today for the first time since I have had the car and this is what I found under the driver side cover... Can you see it? Here's a closer one... :shrug::shrug::??:

Let me start off by saying that this is my 3rd Mustang. I have replaced a rear end in my time and have replaced all the the suspension parts back there. Changed the rear end in my 79 Malibu and the suspension in my 97 Cobra. Now I have the IRS and its somewhat confusing to me. I'm planing...