I'm looking to replace my drive belt with a Gatorback and I'm not sure what length I need. I have replaced the stock idlers with billet-flows (Three 92mm)and have the stock tensioner. The stocks are 90mm each so the additional 6mm is about .25 of an inch making the belt total length needed at 75.35 inches.
Now I can use the stock size belt (75.1 inch or 75) with the additional length and force the belt on or should I go with the 75.5 inch belt and have some slack (0.15 of an inch over) The only Gatorback belt sizes that I see that are listed are the 75 and 75.5 lengths.
Any help would be appreciated.
Now I can use the stock size belt (75.1 inch or 75) with the additional length and force the belt on or should I go with the 75.5 inch belt and have some slack (0.15 of an inch over) The only Gatorback belt sizes that I see that are listed are the 75 and 75.5 lengths.
Any help would be appreciated.
