Idler Pullies

[d-nice]

Tweedy is chirping away under my hood. Sounds like one of the idlers is on there way out. I was looking at billetflow or Lightning Performance idler pulleys to replace the stocks. I have the stock supercharger pulley on there so I don't need an extra idler at this point. My question is do I need a pulley removal tool to remove the idlers?

 

[Terminated03]

Nope, just a socket set. I cant remember the exact size off the top of my head.

 

[vladSVT]

^ x2. The job is one of the easiest there is, took me about 5 minutes to replace them. I would reccomend Metco idlers, one of the best there is (or if not go with billetflow) You need a allen wrench socket, I forgot the size though (6mm? i dont remember)

 

[d-nice]

^ x2. The job is one of the easiest there is, took me about 5 minutes to replace them. I would reccomend Metco idlers, one of the best there is (or if not go with billetflow) You need a allen wrench socket, I forgot the size though (6mm? i don't remember)

Do I just need a socket or an allen socket also? Whats the allen socket for?

 

[03cobra#694]

The bolts are 1/2'' or 13mm,take your pick.