Anybody ever installed a garage door opener through an extra switch or something into their car? If so got any pics? Just curious as I would love to be able to declutter my console box some.
Just finished my VMP TVS install this weekend. Fired it up and drove it around for a while. After about 20 mins these codes popped up. Car seems to idle okay, Actually drives pretty well too, except if I punch it. If I punch it it starts to spit, jerk, sputter, backfire you name it. I assume...
As everybody know Ive been having a lot of little problems since installing this tremec magnum xl. Today I was driving it and I punched it in first, took it up to 7k rpms, was looking down the road, but when I looked at the dash every single system light was on and the speedo and rpm gauges went...
Alright Ive seen this brought up in a few different threads but no one has really found an answer that I could find that is very clear, so I thought I would start a dedicated thread. I just did a T56 magnum xl swap in my 2011 GT
Heres what I know:
per JPC "The cruise control is a common...
Just installed a Tremec T56 magnum XL and ARH long tube headers with high flow cats. I originally had 2 rear O2 sensor codes which I expected and a misfire code for cylinder 4. I returned my steeda tune back to stock and took it to a shop with have the whole crank sensor relearned. After I got...
Well, thought I was done with everything last night. and pushed the car out into the driveway so I didnt wake up my sleeping girls. Did a Tremec magnum xl swap with new mcleod RXT clutch and alluminum flywheel. Alluminum DS also put in ARH Long tube headers and BMR kmember. Anyway, got in to...
Anybody know where I can pick up the grommets for the side exhaust. I believe its part 17c431, but problem I am having is its coming up as an air filter housing grommet. Wanted to make sure I got the correct piece, as there appear to be a few of these with different letters before the main call...
Hey guys having a problem trying to get the quick disconnect to fit my new slave cylinder. Doing a tremec magnum xl conversion. On the last bit of it, and cant get the damn disconnect to fit into the new slave cylinder. I have pushed, I have leveraged I have hammered.....want to know if anybody...
Looking specifically at just going ahead and doing A arms while I have the Kmember out and replacing with BMR A amrs. Really curious what the benefit is of having an adjustable vs non adjustable version of of the a-arms. I mostly daily drive my mustang, and it will see some track time in the...
hey guys. Installing a BMR k member and long tube headers. Finally got the tranny in and complete, went to try and remove the bolts that connect the steering rack to the k member and man are those things on there. I tried an impact, heat, and a breaker bar 6 feet long. I managed to get one of...
So successfully managed the clutch install after the first issue. Today pulled the tremec out of the box got it onto a trans jack and under the car. Went to put the hydraulic slave cylinder on and when I tried to screw the bolts on from the MT82 slave cylinder I get pretty good resistance. It...
Anyone know why Ford disscontinued the boss 302 oil pan...the $120 regular one. Seems in the last week all places are out of stock....got a call from stage3 that my order was cancelled because the part was discontinued, so just thought Id see if anyone had any more info. Any other similarly...
So trying to understand this a little bit better. I am looking to pick up some michelin Pilot SS for my nw forgestar CF10s. I had settled a couple months ago on going 275/35/r20 in the front and 315/35r20 in the back. However, looking at more specs it looks to me as though the 295/35r20's are...
Man! I have never had as much trouble on a car before as I am having on this 2011 mustang tremec magnum xl install with ARH header.....First no matter what I do I can get the headers on. I've had a few of my friends over to try and help.....no luck. Today I decided just to go ahead and get the...
Got a new MGW shifter for my tremec on the way. Just about to put the tremec onto the car....anybody know how difficult it is to install this shifter onto the tremec when its in place? Trying to figure out if I should just wait and install it all together. Ill post pics up when I get it in. Cheers!
Bought some ARP bolts to bolt this bad boy in place, and looked up the torque values in my ford service manual and it said to torque them down to 177lb/in which ends up being like 15lb/ft.......didnt seem right to me so I thought I double check before getting to far ahead of myself. Anybody...
First have to state the obvious but headers are a b to install in these cars......now that thats out of the way. I am installing some ARH in my car and want to know if you guys are using copper silicon gasket sealant when you install them or are you jjust installing them straight on. Just asking...
Hey guys I want to play my lossless music in my 2011 GT, and was wondering if anybody else is doing this. I converter some of my music to .WAV files, and finally found a 1 TB hard drive that sync will recognize ( toshiba formated to FAT32......my 2 WD HDD did not work when formatted to Fat32)...
Been contemplating putting a tremec magnum XL in my 2011 GT for a while. The only thing really holding me back at this point is deciding which one to get. the 2.66 or 2.97. Currently I have 4.1 gears in my car, and engine is stock except for CAI. Getting ready to install ARH catted long tubes...
Anybody have a Carbon fiber drive shaft made for a tremec magnum xl conversion? More interested in it for a decrease in noise than any weight loss....but every little bit helps. How is the noise with the alluminum drive shaft anyway? Cheers!
Hey guys! Im new to the forum but have been lurking quite a while. I have been considering a set of 20x 9 up front and 20x11 in the back staggered set up on my 2011 GT. I had originally intended to put some michelin SS 275 35r20 in front with 315 35r20 in back. When I discussed this with the guy...