Search results

Are these rotors still available?

Like the title says, I have a set of used rear 16" Bogart D10 "race only" wheels that fit the 99-04 Cobra IRS. The wheels are in excellent condition, nothing wrong but some scratches to the finish of the wheel. As of now they have a slightly used set of 28x10.5 Hoosier slicks mounted on them...

I'm currently looking to make some power improvements to my car but I have shifting issues and my problem is I can't make up my mind on what I want to do. I love driving a manual trans on the street but would love the consistancy of a built race trans for drag racing. The car is on the track...

So my issue is too much in and out axle play on the pass side axle. I had been buying parts for a while now and have finally gotten to the installation part. I swapped out my irs for a mach 1 rear about 2 years ago. Today I installed UPR upper and lower control arms, eaton true trac, 31 spline...

I almost had a set but I was a couple of days too late by the time I finally contacted the seller. I'm hoping to find someone looking to get rid of a good set of used Bogart front skinny wheels, with or without tires. I would prefer D10's to match my rears but I am thinking about getting rid of...

I'm getting rid of my 2.8" Riechard racing blower pulley because I have a feeling that it is what is causing my belt noise for something else. I like the billet flow non slip pulley but the only thing that is close is a 2.76". I realize that its only .04" difference but I'm not really looking to...

Ive been looking at buying a torsen type diff. I work at a Ford racing dealership so my price of the ford racing torsen t2 and the detroit true trac are right around the same price. my car is a cruise/strip car so i need something that will take the abuse of the 1/4 mile. Anyone have any feed...

I recently purchased a set of upr upper and lower control arms with the spherical bushings. i got home and realized that they don't have a mounting spot for the rear sway bar. now i realize this isn't a huge issue but i wanted some feed back. i know and understand the purpose of a sway bar and...

I have a question about upr's rear lower control arms. I purchased a set of upper and lower arms and got a great deal while i was at mustang week. the guy told me that anything over 500 hp they really recommend the solid ends so thats what i bought. well what i failed to notice until a couple of...

So ive been getting more and more into drag racing and ive got the itch to spend some cash. I'm going to mustang week again and this year promises to have more and better vendors this year, UPR being one of them. I'm thinking about some coil overs for the front. I do not intend to make this a...

Just got back my overlay made for me by Jason at Stick It Designs. I sent him my gauge face for my new Innovate Motorsports MTX-L wide band and this is what i got back. I can't wait to install it. This is what I sent This is what I got back

Well I know my belt had been a little noisy for awhile but there were no signs of cracking or breaking down so i let it eat for a while. Ive use car quest belts for a while now and have never had an issue other than it squeaking which i get over really fast. This belt is only about a year old...

I am about to purchase either the moroso or canton coolant reservoir for the IC that moves to where the battery normally goes. I havent bought it yet but im curious how it mounts and what else is needed to complete the install. Any install pics or a link to a how-to

I'm in Nova with a local mustang club NVMC and they have a regular drag day every month or so at Mason Dixon dragway. I havent been to the track because i was never really into drag racing but now that i am, i am very curious if anyone has any good news or bad about the track. i have been...

I'm really looking to paint my calipers. i found a thread on here a while ago where someone took alot of time to sand down the caliper and mounting bracket and then painted them and i thought wrote a How-to but i cant find it by looking through the threads or searching. I'm not super picky about...

So i bought a set of Bogart wheels that were designed for the cobra irs. i bought these wheels off of a buddy and he gave me a used set of hoosier 28x10.5x16 racing slicks. i used these for half a season and now im ready to buy a new set but my issue is that hoosier does NOT list that tire size...

So I recently finally finished performing my SRA swap and i am getting a few things welded on my car like my exhaust and drive shaft loop. while my buddy has it, another friend told me to have the axle tubes welded to the actual pumpkin portion. i understand the reasoning but is there really a...

I know that you can purchase heat exhangers with logo's like SVT or COBRA already on them but i bought my afco when it was the very first run. Does anyone make a stencil of those or other logos?

I'm looking to clean up my sra. i didnt have much time to swap rears neatly because of time restraints of one night. I got a sra out of a mach 1 that had about 80k miles on it and it looks like it. im looking to give it a fresh coat of paint. it has surface rust and dirt. any tips on how to give...

I saw on Even Cooling flows web page the other day that there is now a gen 2 kit that is designed so that the blower DOES NOT have to come off. I know that the original kit can be done with out too but it will be that much easier. I am mechnically inclined and know what im doing, i have tools to...

I know there are alot of different types of fluids that people are putting in their T-56. I changed mine over to Royal Purples ATF awhile ago and I think i'm about due to change it. I know Ford recommends Mercon and that has been superseeded by Mercon V. I have access to both but i know that...

i just converted to SRA so i have a slightly used Billetflow IRS brace that is the original red in color. I say slightly because its been on my car for just a few months maybe only 500 miles and about 9 times down the track. I have all the hardware but no instructions but its pretty easy to...

i just got a stock SRA assembly from a 03 Mach 1. i know there isnt much to it different from a GT sra but i was curious, i guess mainly is what spline axles are in this axle assembly. i know i will be changing the gears but at some point in time im gonna want to put a locker in and some info on...

i just converted to SRA so i have a slightly used Billetflow IRS brace that is the original red in color. I say slightly because its been on my car for just a few months maybe only 500 miles and about 9 times down the track. I have all the hardware but no instructions but its pretty easy to...

i just converted to SRA so i have a slightly used Billetflow IRS brace that is the original red in color. I say slightly because its been on my car for just a few months maybe only 500 miles and about 9 times down the track. I have all the hardware but no instructions but its pretty easy to...