I was wondering if there was any way of finding the previous owners of my 98 yellow cobra?The guy I bought it from and the one before him didn't have it long or know much about it.
1990 Mustang GT 5 speed,78,000 miles black on black.Some minor bolt ons which include,underdrive pullies,cold air intake,80 mm Cobra mass air meter,75 mm throttle body,160 stat,msd ignition,off road Hpipe,flowmaster cat back,3.73 gears,moser axles,moser rear end cover,rear upper and lower adj...
I am looking at sellingg my 97 Cobra.Red with black leather 123,000 miles slightly less due to speedo gear not being changed when 4.10s were installed.Theh car has the following done to it.21/2 BBK catted x pipe with 2/1/2 Flowmaster catback,62mm BBK throttle body,82 mm mass air,K/N,9mm...
I am looking at sellingg my 97 Cobra.Red with black leather 123,000 miles slightly less due to speedo gear not being changed when 4.10s were installed.Theh car has the following done to it.21/2 BBK catted x pipe with 2/1/2 Flowmaster catback,62mm BBK throttle body,82 mm mass air,K/N,9mm...
Looking for a nice set of these wheels.I prefer chrome but would consider silver.Aslo would like the wider rears if anyone has these let me know ASAP,thanks!
I have been having this problem on and off for ometime now.The light comes on so I check it with the sct scaner and it reades as follows.P0174 system lean and P1519 intake stuck open(B1) IMRC.Previously I had the IMRC cleaned and checked the controler while they were at it checked out good and...
Does anyone know the weight of the factory 17 inch wheels?Aslo looking for a lighter weight alternative in 18 inch that wont break the bank.What are other low cost weight reduction mods that guys are doing?
Just put my 97 Cobra up for sale on ebay.All pics can be seen there and will answer all questions as best as I can.Have 99% of all the receipt for work that was done in the last year.Very clean straight car.No major mods just the basic bolt ons.Looking to sell to be a Mystic.
Looking to sell my 97 Cobra.Its Rio red,black leather,122000 miles but reads high do to not installing the speedo gear when changing to 4.10s.Also has pullies,82mm massair,62 mm throttelbody,K/N,catted 21/2 x pipe,21/2 cat back Flowmasters,tubular upper and lower rear control arms,sub frame...
97 Cobra back to the track tonight with its best time ever.Slow by what Im being told but this is all its [email protected] 1.93 60 foot in the 1/8th and [email protected] in the 1/4.Thats all she had 4000 launch 6500 shifts spins then kinda falls for a sec and picks right up.
Mods 4.10,catted...
Anyone have a sudgestion as to a good cam for my 97 Cobra?Also wondering if the sprngs can be chandged while the cams are being done without taking engine out of theh car?
I am considering selling my 97 Cobra.The car has 120000 miles but probabaly about 119000 due to the fact it bneeds speedo gear to compensate for the 4.10s.Clean rio red paint and black leather 71/2 out of ten through out.I will try to get some picks up soon.It has new brakes all the way around...
I am having a problem with the clutch cable coming loose at the clutch fork.The bolt that holds the cable to the fork keeps coming loose and makes it hard to shift gears after it gets really loose.The first gear to get hard to shift is reverse.What may cause this.I bought the car used and...
Ok ,my previous best was a 9.44 @75 mph in the 1/8th mile.Tonight I bettered that at 9.26 @75.12 mph with a 2.0798 60 foot.Again the car is a 97 cobra,4.10s,flowmaster catback,bbk catted xpipe,62mm tb,82mm masair,pullies,nitto drag radials275/40/17 H/R lowering springs,bilstein shocks and...
Just got in from the tarck and its getting worse not better.1.45,10.55,9.99 The last run was after changing the tune from the sct tuners "strategey tune" back tyo stock.Also had a buch of wheel hop which is a new issue.When I got hame I checked for codes even though there was no check engine...
I currenty am using the ProFlow 82mm masair meter with the stock air box ans smaller kn filter it car with in the kit.I also have the Steed cai kit in a box and was wondering witch was a better choice?The steed kit wont allow the use of the Proflow meter.:??::??:
I went back to the track today and have some new times.Best et was 9.45 60 foot was 2.25 and 76 mph.This sucks!!!I am having problems findingg the sweet spot at launch.As the night went on I noticed it was getting harder to ingage first gear.Then it bacame harder in all gears.The clutch pedal...
I have a 97 Cobra with the following boltons,4.10,82mm MA,K/N,62 mm TB,REAR UPPER AND LOWER TUBULAR CONTROL ARMS,FRAME CONNECTORS,steed shifter,H/R lowering springs,Bilstein struts and shocks,275/40/17 Nitto Drags radials.Nitto NT01 UP FROMTMAXIMUM MOTORSPORTS caster camber plates.I was...