Recent content by Bite u

Alright as the title states I'm in the process of building a motor or about to build a spare motor I have.. car has a novi 1000 on it as of now.. prolly gonna upgrade the blower when that one kicks the bed.. but for now novi 1000 with a dry kit on top.. car has factory stuff with Walbro 400 in...

Who did u use to build your built motor and why? Need some names of some shops besides mmr, since they r plastered all over the site.. Thanks Richard

Just swapped the car from the little 75 shot to a paxton novi 1000.. just curious what type of plugs you blower guys r running? 1 step or 2 steps colder? It's just a full bolt on b head car with a 8 lb pulley on it. Right now the car is running some br6ef's

Alright guys I need a little info here.. how good of a blower is the 1000? In the process of installing it on my pretty strong n/a cobra. And on previous owners car it made 8 psi of boost.. but that was on stock manifolds and stock intake mani. So not sure how if any long tubes will affect it...

Well guys.. I changed my route again.. instead of redoing my whole setup again to accommodate a turbo setup. Had a buddy with this kit on his car and we worked up a trade for it. Its a novi 1000 with roughly a 8 psi pulley. Now on his car with stock manifolds, no short runner, and 3.55's...

As the title states.. I'm looking for some information or calculator or whatever to figure out effective compression ratios.. I am collecting parts for a rebuild here in the near future. It's a b head motor with factory cams. I have some Manley 17/18cc dished pistons... I know it's supposed to b...

for you 5 speed turbo guys that weekend track your cars... what gears are you running with the stick car setup? just curious... i know most auto guys r running 3.27/3.55's or so... but what do the stick car guys use? same or a little more gear?

Well fellas, I figure I'd go back and try to get some slips after out grudge race match during cruising the coast at the beginning of Oct. Anyways, got to the track and let the tire down to 16 psi (cold), teched in and made my first pass, spun pretty much all of first and got sideways. Still...

For the price listed on the site, is that strictly for the fuel pumps? Or do they come with the install kits? If the install kit is seperate can I get a part number or link? Thanks Richard

Car is in sig.. Previous bests were on same shot, nothing has changed minus some suspension work and weigh loss. Car no weighs 3080 without me vs previous 3220, and I'm 230 roughly. This was a grudge race event, so no slips were givin. However on my last and worst pass some buddies asked the...

Trying to plan out what ima need for this turbo install. Planning on throwing a aero 340 in the tank for now. But what's the cheapest route I can take for the fuel system to support say around 550-600 wheel? Need 60's or 80's? External pump like T. Rex or something do the job? Thanks

Well guys, I ended up scooping up a complete turbo kit with a 76mm on it. Gonna end up with a aero 340 in the tank, now I know for big power ima need either an external or to change intank setup... But how much power can the 340 support "roughly"? Also what's the max on 42lbers, n 60's? Hp...

Well guys, Put the car on the jack stands to swap in a full upr tubular k... N figured will it was in the air I could relocate the battery. So started lookin at the car an looking for parts through my part time job at Oriellys (auto parts store for northerners) 2 main expenses this far r the...

Can anyone think of or know of anyone that has been 10's on the stock shortblock, with either turbo nitrous or charger... I'd assume turbo before any with b head cars. Just curious cause as it cools down I plan on pushing the car a little harder this year. Got a few goodies to lose some...

Anyone running a manual brake kit? If so what kind and how do u like it vs the hydro? I'm thinking about converting so I can run a bypass belt for at the track yet still retain power steering when wanted