Gonna end up turbo after Christmas, few questions..

[Bite u]

Well guys, I ended up scooping up a complete turbo kit with a 76mm on it. Gonna end up with a aero 340 in the tank, now I know for big power ima need either an external or to change intank setup... But how much power can the 340 support "roughly"?

Also what's the max on 42lbers, n 60's? Hp wise... Been searching for a number and haven't been able to come up with it. Thanks

Richard

 

[busta]

While I can't comment on the particular setup you are going with, I had a '97 Cobra with a 62mm turbo (Hellion Kit) which put down 505rwhp/456rwtq on 10psi. That was with only a Walbro 255 intank pump and 42lb injectors. Going any higher than 10psi I found that I was starting to lean out.

 

[Bite u]

Yeah I heard right around 500 was the max or pushing the limits on the 42's. Gonna end up upgrading to 60's just curious what the setup will bring... I'm shooting for. 550-600 wheel. Will b build the motor of course, before anyone says anything.

 

[busta]

Yeah I heard right around 500 was the max or pushing the limits on the 42's. Gonna end up upgrading to 60's just curious what the setup will bring... I'm shooting for. 550-600 wheel. Will b build the motor of course, before anyone says anything.

Nice. I had a great amount of success using a shortblock out of an '04 Cobra that only had 5,000 miles on it. 8.5:1 compression. The best part is I got it for $500 plus shipping on here.

 

[crazycarlo]

Well there are guys making over 600 with 60's but as far as pump I'm unsure. I have a 340 and 60's in my 17psi eaton convert.