Search results

Selling my front cobra brake setup. Has about 2k miles on rotors and pads. Calipers have 80k on them but work great. Slide pins need greased before installing. DOES NOT COME WITH BOTH BRAKE LINES. I have one that is good if you want it, but if you have a 99-02 (I believe) your lines will...

l

We need to get a good showing of mod motor cars out here this year. We had a turbo sn95 cobra come out last year from out of state that was turning some crazy ET's, IIRC somewhere in the high 9's. Come on out and show the pushrod cars what mod motors are capable of. :beer:

Am I the only one that has IE crash almost every time I come here or view a thread? Its not just one computer, its 3 of mine. :shrug:

Curious if there are any issues with using them. Failures, etc.

Trying to figure out what route I am going with this car. Anyone have one? :beer:

I have both left and right ABS sensors from my 01 IRS for sale. You can buy them new from autozone I believe, or rockauto for around $60/ea. Make an offer.

2k miles on fully rebuilt IRS Full delrin bushings (FTBR kit Full Tilt Boogie Racing Homepage) Subframe has UHMW bushings Aluminum diff bushings Billetflow diff brace Maximum Motorsports HD crossmember Brand new Bilstein HD's Carbon fiber clutch pack 31 spline half shafts (stock 01's)...

Just curious if anyone is running 15x10 with 6.5BS with their IRS. Friend of mine is looking to sell his telestars to me for a really good price. Just curious if there are issues with fitment or if I would have to run spacers? Thanks

This has puzzled me for a while now. It doesnt happen all the time. It can not do this for 2 weeks, and then all the sudden it happens and its like this for 2 weeks. When I press the clutch in once I get to about 3/4's of the travel of the pedal it makes the squeaking sound like metal on...

Anyone know where I can find 45 sidewall tires? All I can find are 35's in the 315. I know at one point they made them because I have seen them before, but I cant find them anywhere, not even on the company website. Looking for BFG's or M/T ET streets.

I have seen this covered before, but usually the answers were for someone with a PSR. Mods here are pretty simple, cold air, cat back, 4.30s, braces, bushings, etc. I dont have a ported intake or PSR. Question is this: What rpm is best to shift at when racing? I have heard people say...

Got a new HU so I could use my ipod. What input do I plug the RCA cables in to? I am guessing rear, but I have no idea and I cant find any info on it.

Went to replace my fuel filter and noticed the one installed is part fg986b. Well my owners guide supplement says fg800a which is what I bought. It's an 01 cobra. Went to install it and I don't see any way it will fit. What filter do you guys use? Doesn't make sense to me that my guide says...

This is why you want to replace those diff bushings and I didnt tear any of these up removing them, thats just from all the movement.

Got my bushing kit from Bruce and about ready to install the bushings. What I cant figure out is whats considered inner and outer on the control arms. I can tell front and rear bushings, but WTF is inner and outer?

Anyone know how much power the stock clutch pack in an 01 trac unit can handle? Getting ready to redo the whole IRS and rebuilding the diff is one of those pieces to the puzzle. Cant decide whether I should just use the stock kit, or use the carbon fiber kit. Dont want to just waste the...

I have heard some of you talk about having your ford manual, or service manual. I have yet to get a manual of any sort. I usually just buy the chiltons manuals you can find at auto stores. Anyone have an suggestions on a manual specific, or semi-specific for our new edge cobras and where to...

I was under the car the other day swapping the 12mm bolts for 14mm bolts in the front sub mounts. I put my hand on that rubber block with two bolts through it under the diff and it moved. You can bounce it around just by touching it. First off, what is it? Second, is it supposed to...

I would HIGHLY suggest that you check your front mount bolts for the proper size first. I have an 01 cobra and they put the wrong 12mm bolts in mine. I have MAJOR wheel hop. When I took out the bushing I could see how bad it wore on the crush sleeve. It banged around so much that it actually...

My next move on this car is going to be LT's and from what I am gathering a ported intake. So here is the question, I dont have the cash to drop on heads as well. So, just dropping a ported intake on is cool correct? I am from the old school, havent worked with mod motors, just push rods...

I went to the dyno friday for the first time. It seems the car struggles at 5K. A little background, O/R X, Full SLP LM2 catback, JLT TCAI intake. Past that everything else is stock as far as I know. Whats up with the graph? Both runs showed the same. It acts like something is wrong...

I am wanting to finish up the bolt-on's on my 01, but I am a bit aprehensive about taking it to any shops. Anyone got a line on any good shops in the Tulsa area that can do a good LT install? I have done everything else myself, but LT's seem a bit to involved for my liking. Also, any good...

Just swapped my springs out. If someone is willing to pay shipping they can have the stockers (uncut). I will need to wait about 2 weeks to make sure there are no issues with the new springs. First come first served.

I just got done doing a spring swap on the cobra and thought I would give a tip to anyone going to do it themselves. Removing the IRS bolts is most definitely not hard and no air tools are needed, although it does make it easy. I dont like the idea of putting any extra pressure on the...