Recently purchased a set of Recaros from a 2012 Boss 302. I also have some red stripe covers i plan to swap onto them asap. Before i do all that im trying to make sure they will not cause a light on my dash.
1) Is it as simple as just installing the passenger seat and seeing if the passenger...
So i sold my Carbon Fiber KR style hood. I like it but i always felt the CF clashed to much with the Race Red paint. I bought a cowl hood and had it painted but im honestly not a fan after seeing it on the car. So im left with a few choices for hoods. Pick which you feel is the best looking...
So i want to build a stronger rear end. But i would like to do some modifications including 9" axle ends that would require me to modify my current axle. I was thinking that since im going to be replacing everything internally only the housing was being reused maybe i should just get a second...
Im trying to find a wiring diagram specific for the 13-14 cars. Mainly the headlight harness. Im need it to retrofit my 11 to use the newer lights. Any help would be appreciated.
I found a nice set of 2013 Headlights that i want to swap into my 2011 with HIDs. Im curious from those that may have already done the swap what they did to make it work? I know the plugs are slightly different and ive been searching for an adapter harness to make them work but nothing has come...
Looking to sell my TruFiber A53KR Hood. It will fit any 13-14 mustang or 10-14 GT500. Comes with the heat extractors powder coated satin black to better match the hood. It was $1800 new, i'm looking to get $1000, buyer pays shipping and PP fees. Its located in SC, 29906. Its off the car and...
Looking to sell my A53KR CF Hood. It was on the car for a little over a year and is in great shape. No damage or scratches. It was $1800 new, i'm looking to get $1000, buyer pay shipping. It is located in SC, 29906. It has the functional Ram air and the heat extractors have been powder coated...
So i've recently taken a new job and will be traveling cross country from Las Vegas to South Carolina. Obviously i cannot do it all in one day and it will require me to stop at hotels for the night. Being overly paranoid about someone trying to steal my car i was curious if there is a simple way...
Hey Guys,
Im in need of a replacement battery. My stocker is going bad after 3 years of Vegas heat. Which do you guys run/recommend? Ive been looking at the Optima Red Top but have been getting mixed reviews about fitment issues and possible early failures. If i need to ill just get a...
Van,
I'll be installing my new clutch tomorrow and in the kit was a spacer that I assume is for the slave cylinder. Ive tried searching and found scattered info about this shim. Is it required for installing a 2011+ P trim (SFG5PT-3) on a 2011? The only info I could find said it was for 13...
I picked up a used IW 10% lower and over all it looks good, except that in the pictures i didnt see that it was a double keyed version and not the single keyed one. Is there an issue with running a double keyed pulley on a single keyed crank? could it cause vibration issues or not fit tight...
Im going to pull my transmission soon so that i can change out my clutch and was curious about how high i need the car to be lifted to do this? I have some race ramps wheel cribs that raise it 10 inches. But im not sure if that will be enough. I dont plan to pull the transmission out from under...
Its finally happened and im in need of a clutch. While i have chosen to go with the Spec P Trim i see that there are two different versions. One for the 07-09 and one for the 10-14. Does anyone know if the only difference in these is the slave cylinder that is used with them? The reason i ask is...
Just curious if any of you guys have thought about doing this to your tail lights? I did the 13 conversion on my 11 a few months back and the stock tail lights look great but after every wash i can see more and more swirl marks. I figured if i was to take them off and lightly sand them with 1500...
I've been getting some noticeable vibrations from my car after installing a DSS single piece aluminum drive shaft a few months ago. I had it installed by a local drive-line shop because i don't have access to a lift at home and i had no way to load the suspension evenly. After purchasing some...