Search results

I ordered it new, drove it for 9 months, and its been parked in the garage since last October. Its still covered by factory warranty, and has all options except navi. 3.5L V6 278hp, 6 speed manual, 32mpg on freeway, 28-29 local, 5 passenger, sunroof, red w/black leather interior, Lanewatch...

Stock E7TE = 49.6LBs AFR 165 Renegades = 28.3LBs Both heads weighed w/valves, springs, seals, & retainers on a accurate and repeatable digital scale. (42.6LB savings from the heads alone)

This winter I'm building a NA 302 ci w/new AFR 165 Renegade heads, custom FTI cam and a top end of 6500rpms. I estimate it'll put down 320rwhp on a cold / dense air day. Is a 73mm C&L MAF big enough? (w/30lb injectors) (all ready have these) Should I go 255L or 190L fuel pump? (need to buy)...

No longer looking. Thanks

Parts are no longer For sale

Guys, I'm looking to buy a new welder and would like some suggestions from like minded car guys. I'm no guru with MIG welding but I did take 3 classes at a local college where I did real well using their high quality welders and 1/8th & thicker steels. I can lay a good smooth bead and make...

If you have a built T5 and/or a set of aftermarket aluminum heads PM me details about what you have. PMs will be checked each evening. I would STRONGLY PREFER to see the parts in person. Shipping to 43040 (Just north of Columbus Oh)

FS: A scangauge w/two cables. A standard 6ft, and I made a 8ft for having a wireless look when installed in the car. (I bought everything new) I ran the wire up the A-pillar, across the headliner, and had the scanguage velcroed to the top of my mirror. Was a very clean install and most...

Sold!

New / never used comp cams degree kit. #4796 Includes video! Sells for $140 @ JEGS. $100 (free Shipping in the lower 48 states) PM's will be checked each evening. (PM w/e-mail addy and I'll send pics) Located in Mid, Oh

• Stock lower “caged” pulley – 12k miles. Works perfectly. • JDM 4lb lower pulley • Stock supercharger belt. These parts were used on a 2002 ford Lightning that I bought new. - The stock lower pulley has 12k miles on it and includes the “cage” w/internal bearing. - The JDM pulley adds...

I'm looking for a 25.68 diameter spare w/5 x 4.5" bolt pattern. (see my post here) If I can't find something thats close to the right diameter.. I will settle for a spare from a 96-04 GT. Shipping to 43040

Guys I need some help in finding the right sized spare for a 89 w/5 lug conversion. And hopefully w/o spending a stupid amount of money. My combo is this: Tire diam = 25.68" (245-45-17) Front hub is largest = 2.785" (rears are 2.540") Front brake calipers are PBR brand and will require a...

I'm wanting to move these parts! I'd love to sell everything to one buyer. I'll cut a single buyer a GOOD DEAL. Talk to me! Two racetest solenoids. These are the worlds best and can pulse all day long. (Made & tested in England by WON). Two solenoids have never been mounted in a car...

I have two Ford racing jackets that are in PERFECT shape. We are non-smokers and hardly ever wore them. One Is large and the other extra large. IMO both are on the bigger side. I usually wear a XL and can easily wear the L. Good quality and are practially new. Paid $60 each a few years ago...

sold

Have some stock Gen 2 parts for sale. They need to go and I hate to throw them away. Make a reasonable offer that includes packing & shipping from 83221 and I'll get them out to you asap. NOTE: I'll be out of town for a few days but can start shipping parts on Thurs Oct 7th. e-mail me...

BOTH SOLD! Regards, Rich

Here is a link to a lot more pics that I took just yesterday: Picasa Web Albums - 11017845041310271... - 2002 Lightnin... Silver 2002 Ford Gen 2 Lightning $17,700 Vin# 2FTZF07312CA50603 Build Number 2030 of 4726 (only 1018 were silver) 38,2xx miles, Original owner, Non-Smoker, Never...

Hey guys, I'm going to be in Ft W. for a wedding in a couple months. What's the best BBQ place in that neck of the woods? Urban spoon say rustys up in frisco has good ratings. btw, I don't know squat about Texas style BBQ other than it's beef based. All I know is that I HATE vinegar based...

Anyone have some "cam bolts" to fix the clunk? I've never done this and want to get them in before getting my alignment. PM me.. Rich

Put together a little video of my cams. Thought you Gen 2 guys might like a decent reality check on what they sound like. Comp Cams XE278AH VIDEO A few observations. - You need a stall convertor. - Raise the 1-2 shift for low throttle / low speed shifts. - Don't lock the convetor...

Hey all, I'm needing to get into a 4 pass car that will become my daily driver (except in the snow / salt). I'm open to any offers but there are several key things the car must have. 1) Must be either stock... or built with the highest quality of parts. I plan on owning this car...

Hey Guys, Well I finally got-er-done. Engine went in last month, broke it in, cruised woodward, drove to Texas and back, and FINALLY got it out to Milan dragstrip last night. First I want to personally thank "Bird". He helped me GREATLY when I was out on a limb.. and it broke. Thanks...

I had always thought those things were junk. Guess I was wrong. It's not as good as race fuel.. but if you don't have access to it or are traveling in low octane areas? It's might be worth the cost. Octane Booster Reviews REF chart: 100:1 = 0.01 80:1 = 0.0125 60:1 = 0.0166...