:shrug:My question is simple, how do you defend yourself when the ticket is for unsafe speed? I could give all kinds of info about what was going on at the time but it is a fact “from my point of view” that nothing was unsafe nor above the 65 mph speed limit on this 3 lane I45 and there was no...
This is a new rebuild with less than 4K on it and she is drinking oil like me with a case of beer on a hot summer day. It is not smoking and the plugs look text book. I pulled the engine again and replaced the valve seals and that did no good. Comp is 185 to 190 on all eight cold with no oil...
Ok...I will start. Pulled engine and replaced all valve stem seals and check all I could to insure engine as it should be. Stabbed it all back in started it up all is great. Went to put the clutch cable back on and guess what.....the clutch fork is still on the bench....well shit. Pulling...
I pulled the engine, and replaced all the valve stem seals. I tested all piston compression at 190+ psi before I pulled the engine. Out of the car after replacing the seals I put 32 psi into a cylinder, set the torque on the torque wrench to break over at 4 o'clock on a known good cylinder and...
I got out of the Army in 86 and in my day we did not train on IED detection. I have been thinking about how they can be detected and have an idea I think might work but not sure who to talk to or how to pass the Idea along to DOD. Before I do any more about this Idea I thought I would ask the...
If all that is in the universe came form the big bang then what was in the space of the universe before the big bang and where did all of it come from?
Ok now my answer: The universe is now in its expansion stage. What is in the universe has always been in the universe. It will expand...
:banana:Now that I have the Cobra back on the road it is time to start work on converting this 96 mustang I bought to a total drag car with a Cobra engine that is on the stand waiting for my attention. I am asking all their ideas on what I should do to make the most of this stock engine. I am...
I have never been a big fan for IMRC delete for a DD, but am in the process of installing a fresh rebuilt engine and notice on the old one I am removing that the secondary intake valves look like s*** and the primary are as clean as a baby's butt. Could this be a sign that the IMRCs are not...
:banana: I bought a 96 mustang that I plan on converting to a drag car only to run brackets at the strip. Not looking to build a 5 second car or anything just a car that runs a good time. I have a corbra engine to go in and I know I will need a diffrent rear end because this car is not even a...
:banana: I bought a 96 mustang that I plan on converting to a drag car only to run brackets at the strip. Not looking to build a 5 second car or anything just a car that runs a good time. I have a corbra engine to go in and I know I will need a diffrent rear end because this car is not even a...
:shrug: I had to remove the driver side valve cover looking for yet another new noise. Getting it off is one thing but anyone have any tricks getting it back on with engine in place? :shrug:
I am needing to change out my Throttle body (98 cobra) and Ford is telling me they no longer sell them. So I am looking for after market. I want to stay with stock so anyone have any thoughts on the best after market unit?
Has anyone out there used AutoTap to data log and if so any chance I could get a copy of your log? I have a 98 Cobra and am just not sure I am getting the correct information from the program.
I now have AutoTap for data logging and would like to log another 98 cobra to use to compare to mine so I can work on a list of what the system reports and what the norms are. Is anybody out there (Houston area)?
Let me know and I can make you a file of your log if you would like. If anyone has...
I now have AutoTap for data logging and would like to log another 98 cobra to use to compare to mine so I can work on a list of what the system reports and what the norms are. Is anybody out there (Houston area)?
Let me know and I can make you a file of your log if you would like. If anyone...
I am at my wits end. I can not get the car to pass the emissions in Texas which with this year is done by reading the computer status. I have 3 tables that are still reading not ready after doing the ford drive cycle 3 times and more than 2K miles on the car. It is not throwing any codes and...
Jim and I Started the engine yesterday and thought I would put up a few pics and ask for info from you guys.
The start
Now for my question. What have you guys had done to the B-heads and how did the work turn out for you? This one is going back together mostly stock but any...
I have not yet posted pics of my 98 so just to show I have one here she is. I just had to put another engine in her and am going to rebuild the old one and putting it back in.
Engine bay
Outside....
Ok its dark....but here she is...
I have worked in high end electronics for 27 years so for me this is second nature. If something does not make sense PM me and I can edit it. I could not get the graphs to come out....sorry. If you think the amps of the alt are incorrect then having it tested at the parts store is best. This...
Connecting rod bearing failure? Have you had one?
:bash::bash::bash: To all that have had a connecting rod failure which number pistion was it? I am guessing most were 1 and 2 and I want to see if I am right. If so....there might be a known cause and cure but I am not sure yet. Just want...
Both units increase HP that is a given. What HP gain for each have you seen from N/A engine and at what cost to gas mileage. Dont forget the amount of bost you are running. A friend and I have an Idea to increase both so I was hoping for info on how much mileage you lose with the boost upgrade.