Search results

Anyone with experience dealing with a stripped / stuck nut on the rear IRS frame brackets? I went to put the rear subframe bolts in and the drivers side rear would not initially line up with the captured nut inside the mounting bracket. It then bit but as I was tightening it down it got tight...

Current motor is a stock long block 01 cobra with a P1SC making 450. Just bought a forged low compression long block with blower cams installed. This motor has a 99-01 Kenne Bell intercooled 2.1 kit on it. I look to only be missing the heat exchanger. Kit has a 3.75 pulley and is supposed...

Looking for some help getting more fuel without going crazy on my 01 cobra with a P1SC. Currently running a Deatschwerks 340lph pump in the stock basket. Got to 5700 at 451hp and the tuner stopped the pull as the pressure at the injectors started dropping. Looking at the data log it is maxed...

I am installing a P1SC stage 2 kit on a 2001 Cobra. It has the black "bullet" open air bypass valve. Where should I get the vacuum reference for the top fitting on the bypass valve? I assume it is after the throttle body but didn't know if I can tap into an existing vacuum port. Any help is...

Q Going procharger and I have an ON3 coolant crossover kit. I have not figured out how to fill the system and to burp the system as there is no crossover fitting to burp it. Any real life experience would be appreciated?

01 Cobra. Looking at a Procharger P1SC stage 2 kit With a SCT live wire T5 tuner. Need a recommendation for a tuner who can get it running properly and put in a conservative tune due to the stock bottom end. Anyone with experience or knows of a SCT tuner with experience beyond the...

Putting my 01 back on the road after two years. Find that the fuel pump died. When pulling the tank I was removing the filler neck as the gasket between the filler neck and the trunk floor is inside the trunk on the top so I couldn't just let it slide down. As I was pulling it out of the tank...

Thinking of swapping out my 01's IRS for a straight axle and going with deep gears. Anyone know of someplace I can find a complete (or close to complete) rear end that I can see beforehand? Not interested in getting rid of or swapping the IRS, looking for an outright purchase. Not looking...

Vinyl top on the 01 has a small hole in it and one edge is starting to get damaged where it folds. Looking into an 03/04 cloth replacement top. Whats the opinion on price for the top and the install. I want to keep a glass rear window also. Not sure if my window is compatible...

Looking for one 17x8 polished 2001 cobra wheel in excellent condition. Located in central MASS anyone put there have one sitting around? Willing to buy 2 if the price is right and someone doesn't want to part with one wheel. thanks

My wife's ONE!! ****ing month old Mazda just got hit by some asshat in a parking lot and he left. Police report filed, no chance of ever finding this guy again. Sad part is I know what he looks like and roughly what he drives but I have no way of tracking it down other than that. So pissed...

Owned by the double post :(

A while ago on this board a national chain of used auto parts places was mentioned as a possibility of having a termi or mach hood. I flagged the page and now with a computer problem I cant find the website of the company. They were national and had a branch in Massachusetts. Their website...

Want to get either black chrome or chrome FR500 wheels deep dish. Want opinions from people who have the 17s or 18s, which do they prefer. Like the idea of a wider tire on the 17s since they come in 10.5 instead of 10 but I think the 18s are going to look nicer. Thanks for the input.

Wanted to know if anyone has tried a Nitto 305/45R-18 DR on a 10 inch rim on a new edge? Didnt know if the height of the tire would be a problem, especially on a lowered car. Thanks

Best thing I ever did to the car (not that I have done much) Cowl shake over rough roads is gone, annoying squeak in dash over bumps is gone. Car actually doesnt seem to "twist" in the middle over anything rough. This should be the first mod any convertible owner does, amazing change in the...

Just finished installing a JLT RAI on my cobra. Kit was bought used and was told was used for only a few months. I believe him, all parts look as new including the directions and the original packing box (I think) Install Impressions: The oval tb to rubber part was easy, alot easier...

Need a shop to weld in a set of MM flsfc's on my mustang. Anyone know a place that wont bend me over on the cost and do a good job??

Does anyone run a set of chrome FR500s on a laser / rio red car? Would like to see them on a laser red vert if anyone has that. Really starting to like these in chrome. Thanks

Looking for pics of regular and depp dish FR500s in chrome on a new edge, love to see it on a Laser red. SSR too pricey for me and now I want a set of wheels. Thanks

anyone with reupholstry experience? This is for a CDC lightbar. The outer vinyl is damaged and the trim shop I went to wants to redo it in 4 way stretch vinyl, unfortunately, only comes in black, not the dark charcoal. I can get the charcoal but not in a 4 way stretch. I have to do it myself...

I have been adding a single layer of edaed v1 to the trunk on my vert to try and get rid of the roadnoise and to help with the sound after I insall a sub in the trunk. After getti9ng a single layer on the trunk floor, I am going to addd another layer as the panels seem too resonant still to me...

Dragun Paintball gun package FS or FT I have a Dragun TES in black electronic frame paintball gun. Adult owned. comes with stock black barrel, nylon anti chop bolt, shim kit to adjust velocity, spring kit and spare parts kit. Gun shoots great but have no time at all. Micro switch has been...

Anyone out there have a fiberglass boot that lets you use the back seat? (unlike the saleen style one) I would like a decent looking cover rather than the crappy Ford one that is never straight. However, I need the rear seats for the kids. A two piece would be perfect. Anyone with info /...

Anyone out there have a fiberglass boot that lets you use the back seat? (unlike the saleen style one) I would like a decent looking cover rather than the crappy Ford one that is never straight. However, I need the rear seats for the kids. A two piece would be perfect. Anyone with info /...