If your hitting full boost by 3k then the twins will be considerably faster than the Paxton. Also seems Centris need to be revved to work. Both are awesome.
If your hitting full boost by 3k then the twins will be considerably faster than the Paxton. Also seems Centris need to be revved to work. Both are awesome.
If your hitting full boost by 3k then the twins will be considerably faster than the Paxton. Also seems Centris need to be revved to work. Both are awesome.
Comparing that to an On3 car on 11psi, holy shit. Huge difference. After that, I knew turbo's were the way to go on these cars. Can not wait to get them on my car and make some awesome power even on low boost.
My car hits full boost just before 4000, not 3000. It's comes on very quick though and in a higher gear like 4th it'll hit full boost by 35-3700 rpm.
MUCH more responsive down low than the centri it replaced.
My car feels as strong now at 6.5 psi as it did with the Paxton at 9-10 psi.
I can't imagine what these twins will feel like at 11 psi.
Care to post some finished engine bay pics? Sorry if I missed those somewhere else in the thread.
Still that's impressive. Do you have a stock Intake on your car? How high you spinning it? I have the CJ setup now. I wouldn't feel comfortable spinning it to 7700 but could always shift lower untill the motor is built. Is your fuel setup just a BAP and ID1000 pump gas. I'm asking these questions because On3 is local I know Chad personally and can get a good deal.
don't think I posted these yet... one of the engine and one of it when I was driving around without the front bumper as I ironed out any small leaks or issues.
stock intake. Ive never shifted this car over 7200 rpm and don't really plan to moving forward. Fuel system is ID1000s, kenne bell BAP and pump gas. I can get 100 octane out of the pump locally but its damn expensive so i'll just mix it with 91 from time to time.
It feels strong, very strong. The same car I just mentioned also hit 20-24 one night. It's a base On3 kit with the 60's. 20-24psi feels so ****ing unreal, I don't even know how to describe it.
What kind of power is that thing making?
His car made 879 on 19psi at 6200rpm's on a Mustang Dyno. 655whp on the same dyno on 11psi. Which is very misleading because that 655whp put a few bus lengths on a Paxton with 675whp.
Where are these videos of that on3 kit driving.
The people want videos.
GIVE US VIDEOS! op:
Where are these videos of that on3 kit driving.
The people want videos.
GIVE US VIDEOS! op:
^I'm with this guy!!
Here is a quick vid I made today. Gimmie I hope you don't mind I am posting it in your thread. Figured there was no reason to start another one seeing how everyone is in yours Lol
We have the basic set up so I thought I would share. I got a clip with the camera mounted right above the mufflers and then on the hood. It is inside my water proof housing which cuts down on the wind noise but make the video quiet so turn up your speakers. I was glad you can hear the turbos spooling. Both clips are rolling in second gear then hitting it, running 11psi. I also have 3.31 gears.
2012 Mustang
On3 TT 60mm kit
No cats w/MBRP exhaust
[video=youtube;ts8GSx0Jiak]https://www.youtube.com/watch?v=ts8GSx0Jiak[/video]