It's definitely a nice touch. It looks really good on the car.I like that a lot. I don't care for the GDM as much at all.
Sent from my moto g power (2021) using Tapatalk
It's definitely a nice touch. It looks really good on the car.I like that a lot. I don't care for the GDM as much at all.
Cool you think 18" is enough height? Seems like a good height to reach stuff out of there.Yeah, 18" isn't bad at all. Get some magnetic LED lights and mount them underneath.
Then in the 18" gap you can mount pegboard or a tackboard. Whatever works best for you.
Yes, 16"-20" is about average. It depends on how tall the bench is.Cool you think 18" is enough height? Seems like a good height to reach stuff out of there.
Edit:. Looks like 18" is average distance. Should work!
Sent from my moto g power (2021) using Tapatalk
I just measured mine, it's 21" above the bench.
Not sure I would go any lower than that.
Thanks for the help! I may go up to 20-22". I'll try to mount them this weekend.Yes, 16"-20" is about average. It depends on how tall the bench is.
Overall height from floor to top of cabinet is under 70" in most cases. Those are kinda tall, so you could probably go up a couple inches above that. I installed custom office furniture for almost 20 years. You want to be able to reach everything from the front of the desk/bench for the most part.
A cheap pencil/junk draw mounted to the bottom of the bench would be convenient I bet too.
18"?Mounted all my cabinets same as what would be in a kitchen.
I'll check when I get home in the morning.18"?
Sent from my moto g power (2021) using Tapatalk
Mounting a single "junk" drawer under the bench (right side if you're right handed) is an excellent idea, Paul. It looks like Brady would still have enough open space under the top to utilize the two bench stools.Yes, 16"-20" is about average. It depends on how tall the bench is.
Overall height from floor to top of cabinet is under 70" in most cases. Those are kinda tall, so you could probably go up a couple inches above that. I installed custom office furniture for almost 20 years. You want to be able to reach everything from the front of the desk/bench for the most part.
A cheap pencil/junk draw mounted to the bottom of the bench would be convenient I bet too.
Just measured…19”18"?
Sent from my moto g power (2021) using Tapatalk
I just measured my kitchen cabinets from counter top. Mine is 16.5".Just measured…19”
That's probably a better idea. I was thinking about thatNice job! Why not add an outlet and just plug the lights in. You can see the power running right across the wall. Plus, your bench has an outlet strip you could utilize as well.
Appreciate it, thank you.Sweet garage!
That makes total sense, Paul. A junction box, some conduit to the outlet mounted just below the cabinet. Easy peasy. And a AC 3' LED florescent light fixture mounted under the cabinets. Plus you get at least one additional outlet for a tool, radio, etc.Nice job! Why not add an outlet and just plug the lights in. You can see the power running right across the wall. Plus, your bench has an outlet strip you could utilize as well.
The hardest part is deciding on which style to go with LoL.That makes total sense, Paul. A junction box, some conduit to the outlet mounted just below the cabinet. Easy peasy. And a AC 3' LED florescent light fixture mounted under the cabinets. Plus you get at least one additional outlet for a tool, radio, etc.