Subscribing...anticipating...
I would like to see some #'s my snake bite #'s are in sig.
do you have a shield on you steeda cai, you should take it off. I've heard about them restricting flow on the surronding areas of the filter. Your numbers still aren't bad for sae.
It was off, I feel it can make 535-545 rwhp in some cold weather and more timing. set to 19 deg's for street. it has been 11.30's at 121 in florida heat 85 deg's and 70+% humidty, no powershifting 1.7x 60ft
Most guys who make 540+ are up north in the cool weather.
here is link to my dyno sheet and vid YouTube - 2003 cobra snakebite dyno numbers
A 121mph trap indicates more like 460-490rwhp.
well drove car to the track very little cool down in 90 deg heat and very high humidty. timing was pulled way back due to heat.
What were your charge temps, what timing was it seeing on the big end?
no idea on iat's #2
timing was 16 deg's on big end in 4th
when i started my burn out the iat's were about 104 deg's
I had a hell of a time just trying to see timing in 4th gear as I do not data log. just reading off of x3
you can log with the X3 and then pull the log off and read it on your computer.
how would I save it. can you send me a link with direction's
sorry OP to cluter up your thread
it is saved in the X3. you use the SCT software to pull it off the X3 and onto your computer. then view in excel.