Picked up a couple of new sleds and waitin' for the snow.Out in the desert playing again. Been away since Friday.
What’s new??
Sent from my iPhone using svtperformance.com
Can way for the staht up mane.Bigly progress today. Would have pressed the start button but still need to wire up the oil pump and we are off to basketball practice for my son.
Re routed my oil return lines. Got turbos clocked properly and installed for last time (I hope). Finished cold side and got it all bolted down.
Got heat wrap installed on bottom of car next to turbine housings.
I made a poor mans 2 stage electronic boost controller with a MAC solenoid I got off amazon for $25.
Things are looking up!
I’ll start it in the stock tune tomorrow and just check for leaks.
Giggiddy!
View attachment 1541249
View attachment 1541250
View attachment 1541251
View attachment 1541252
View attachment 1541253
View attachment 1541254
View attachment 1541255
View attachment 1541256
View attachment 1541257
View attachment 1541258
Sent from my iPhone using svtperformance.com
Atta boy.
I drove my turbo fox from El Centro to San Diego for a tune. Ran perfect. It was on an NA tune btw
Sent from my SM-G950U using the svtperformance.com mobile app
Hahha. I remeber the day I was headed to San Diego. Other than the headers i built it myself soni was pretty excited.
My Wastegate was dumped to atmosphere and some guys on Turbomustangs had used lawnmower mufflers to quiet it.
So at 5am I'm finishing making the flange and had to drill out a hole a little. Was in a hurry....saw my skin corkscrewing up the drill bit before I felt anything....too much of a hurry to use a vice. Lol. Almost fainted when I saw the hole in my hand.
Still made the dyno appointment though.
Back on topic.
Sent from my SM-G950U using the svtperformance.com mobile app
Morale of the story....dont rush too much as you almost finish!