2018 Twin turbo build

[Smooth]

Woss up, mane?

 

[gimmie11s]

Out in the desert playing again. Been away since Friday.

What’s new??


Sent from my iPhone using svtperformance.com

 

[MG0h3]

Figured thats where you've been. Weather is perfect out there this time of year.

 

[Smooth]

Out in the desert playing again. Been away since Friday.

What’s new??


Sent from my iPhone using svtperformance.com

Picked up a couple of new sleds and waitin' for the snow.

Looks like we've got both ends of the Wintah playing/playground covered.

 

[gimmie11s]

Bigly progress today. Would have pressed the start button but still need to wire up the oil pump and we are off to basketball practice for my son.

Re routed my oil return lines. Got turbos clocked properly and installed for last time (I hope). Finished cold side and got it all bolted down.

Got heat wrap installed on bottom of car next to turbine housings.

I made a poor mans 2 stage electronic boost controller with a MAC solenoid I got off amazon for $25.

Things are looking up!

I’ll start it in the stock tune tomorrow and just check for leaks.

Giggiddy!

Sent from my iPhone using svtperformance.com

 

[gimmie11s]

DP

 

[gimmie11s]

Sent from my iPhone using the svtperformance.com mobile app

 

[Smooth]

Bigly progress today. Would have pressed the start button but still need to wire up the oil pump and we are off to basketball practice for my son.

Re routed my oil return lines. Got turbos clocked properly and installed for last time (I hope). Finished cold side and got it all bolted down.

Got heat wrap installed on bottom of car next to turbine housings.

I made a poor mans 2 stage electronic boost controller with a MAC solenoid I got off amazon for $25.

Things are looking up!

I’ll start it in the stock tune tomorrow and just check for leaks.

Giggiddy!


View attachment 1541249

View attachment 1541250

View attachment 1541251

View attachment 1541252

View attachment 1541253

View attachment 1541254

View attachment 1541255

View attachment 1541256

View attachment 1541257

View attachment 1541258







Sent from my iPhone using svtperformance.com

Can way for the staht up mane.

 

[tones_RS3]

That's awesome bro!
Good luck on the initial start up tomorrow.

 

[gimmie11s]

Thanks fellas. Motivation was down there for a while but I’m fired up again.




Sent from my iPhone using svtperformance.com

 

[MG0h3]

Atta boy.

I drove my turbo fox from El Centro to San Diego for a tune. Ran perfect. It was on an NA tune btw

Sent from my SM-G950U using the svtperformance.com mobile app

 

[gimmie11s]

Atta boy.

I drove my turbo fox from El Centro to San Diego for a tune. Ran perfect. It was on an NA tune btw

Sent from my SM-G950U using the svtperformance.com mobile app

That’s what I’m talking about! I’m hoping for similar luck tomorrow when I fire the bitch.


Sent from my iPhone using the svtperformance.com mobile app

 

[MG0h3]

Ya heck and I even moved the maf. The ecm back then was pretty "dumb" though.



Sent from my SM-G950U using the svtperformance.com mobile app

 

[PaxtonShelby]

Hell yeeeeeaaahhhh!!!

Someone isn’t going to need an alarm clock to wake up early tomorrow morning...

 

[MG0h3]

Hahha. I remeber the day I was headed to San Diego. Other than the headers i built it myself soni was pretty excited.

My Wastegate was dumped to atmosphere and some guys on Turbomustangs had used lawnmower mufflers to quiet it.

So at 5am I'm finishing making the flange and had to drill out a hole a little. Was in a hurry....saw my skin corkscrewing up the drill bit before I felt anything....too much of a hurry to use a vice. Lol. Almost fainted when I saw the hole in my hand.

Still made the dyno appointment though.

Back on topic.

Sent from my SM-G950U using the svtperformance.com mobile app

 

[gimmie11s]

Hahha. I remeber the day I was headed to San Diego. Other than the headers i built it myself soni was pretty excited.

My Wastegate was dumped to atmosphere and some guys on Turbomustangs had used lawnmower mufflers to quiet it.

So at 5am I'm finishing making the flange and had to drill out a hole a little. Was in a hurry....saw my skin corkscrewing up the drill bit before I felt anything....too much of a hurry to use a vice. Lol. Almost fainted when I saw the hole in my hand.

Still made the dyno appointment though.

Back on topic.

Sent from my SM-G950U using the svtperformance.com mobile app

Holy shit! Ungood.


Sent from my iPhone using the svtperformance.com mobile app

 

[MG0h3]

Holy shit! Ungood.


Sent from my iPhone using the svtperformance.com mobile app

Morale of the story....dont rush too much as you almost finish!

Sent from my SM-G950U using the svtperformance.com mobile app

 

[svt04cobra1]

Looking good man!

 

[tones_RS3]

Did you fire her up Dom?

 

[Smooth]

Less hear it mane.