motor

Pabs killing it with another 2 Minute Tuesday! Why would you risk your entire build to depend on a weak cast OEM unit? Boundary Oil Pump Gears and Sprockets are the solution, plain and simple. if you have any questions or need any help just let us know.#TeamLethal #Boundary Product Link -...

Terminator heads made after the tick issue date code 11-01-02 $890.00 or Make me an offer They are complete with cams and some Navi valve covers I bought them for a project some years ago from Chip at King Cobra Motorsports in Fallbrook CA Let me know if you require a specific picture of...

Hey all, So I have a 99 gt with a Windsor motor. I've searched everywhere for a rebuild kit to refresh the bottom end. Only rebuild kits I've seen are for romeo engines. Can't seem to find a full kit for a Windsor motor on A&m, Lmr, jegs, Summit, or rock auto. Any one got anything info for me...

Having trouble centering motor. looking for the distance between the passenger side frame raIL (near plastic flap) to center of crank bolt. Also if possible same measurement to the drivers side. it would really make my day if I can get measurements from somebody with a completely stock car and...

hey guys, I am new to the area....I am looking for a good car shop to work on my car..... hard to find honest people these days....I have done some research, I came across a couple of shops......if there is anyone that works at a shop but would like to make money on the side, let me know. I live...

hey guys, I am new to the area....I am looking for a good car shop to work on my car..... hard to find honest people these days....I have done some research, I came across a couple of shops......if there is anyone that works at a shop but would like to make money on the side, let me know. I live...

Preferably close to Dallas, TX, but will drive up to 500 miles for a solid shortblock that is ready to drop in. Looking for <70k miles.

For sale- 4.6 L DOHC 2003/2004 SVT factory complete cobra motor-38k miles Ported heads by hpp racing of lewisville Aeromotive fuel pressure regulator Head cooling mod NGK TR6 plugs BBK long tube headers Ram powergrip 26 spline clutch Fidanza aluminum flywheel w/replaceable ring A/C compressor...

1997 cobra engine, 124k miles, new timing chain and tensioner, new valve seals, new upper and lower intake gaskets, and new imrc motor. Will come with complete engine, not including coil packs or wires, no wiring included either. Will come with stock exhaust manifolds, a spectre cai, and im told...

Hi all, ill try to be quick with this. I bought a teksid block recently, and it has the usual forged cobra crank inside it. For the build, Im going to use the forged crank (supposed to hold a lot of hp, cant remember the number) and have the block cleaned up. For the internals, what company is...

Hey everyone I have a quick question. I'm looking at a 2003 gt mustang with a full 03 cobra swap. The motor/body all 03 cobra parts. My worry is if the motor or anything else was stolen. The owner gave me the vin and the number to the mechanic who built the motor. My question is how can I find...

I'm trying to part out my cobra and was curious what I could get out of selling the full swap with my 8.8 rear end. I have a 5.0 rebuilt with 55xxx and rebuilt tranny with 12xxx plus I've got an ecu and harness. Any suggestions on what a fair price would be?

4.6L 3V V8 Engine/Transmission/Harness Low Mileage Looking to make that V6 sound like a V8? Well, I am pulling the STOCK engine from my 2009 Ford Mustang Bullitt. This engine was meticulously maintained. The engine never had any problems. Engine has right above 23,000 miles. It has always...

Alright. I'm an idiot. Okay now that we have that out of the way on to my predicament.. When my buddy and I put my longtubes on my mach 1, he happened to leave one of the bolts out of my motor mount on the drivers side. Its the back bolt, right in front of one of the primaries. The...

Hey guys, I'm a fairly new Cobra owner. I bought a 99 Cobra a few days ago that had what I assumed was a timing chain tensioner bad, as it was lightly knocking. I got a very good deal on the car, but when I was backing it off the trailer it jumped time and I shut it down right away. Hoping I...

delete

I was racing a new Camaro SS, annnd 6900 rpm's later I have a knock going on underneath my drivers side valve cover now. I dont know what it is just yet, idles fine, drives fine, just knocks..... I have never rebuilt a cobra motor and the pony is about to go into the barn for the winter, so I...

Selling my lightning block (has Manley h beam rods Manley pistons, arp main bolts) and complete supercharger and all parts ( heat exchanger, engine wireing harness, pulley bridge etc) I have all the parts to do a lightning swap minus the front cover and heads on the motor. I can text or email...

Trying to sale locally (Jacksonville, Fl.) **Not parting out** Short block is assembled with ARP crank & rod bolts. MMR side bolts. Motor is 2003. Block (iron) was machined and painted with brass freeze plugs installed. Piston was replaced with OE. Heads are 4 thread 2003 (have ARP head...

i have a 2001 Cobra and am rebuilding the motor... trans is coming shortly after. im not sure yet as too if i want to go with the MMR 4.6L kit(400900RA) or the 5.0L stroker kit (400900SRA). i want to get some outside opinions on there products and some power numbers people got with both the 4.6...

This motor is perfect and all stock with 42k miles if anyone would be interested I'd take 4200 cash or mabe partial trade for fox body mustang parts I'm in okc

I just had my stock cobra (14k miles) fitted with a kenne bell 2.2L and tune from C&M performance in wisconsin, Including all supporting mods: 60# injectors, mass air, new boost-a-pump. Problem is, engine is ticking on the way home from the shop. I have an independant shop do a leakdown and they...

THIS MOTOR IS IN PERFECT RUNNING CONDITION, TOOK IT OUT TO REPLACE WITH 347 STROKER MOTOR. WOODALL AUTOMOTIVE DID THEY WORK AND CAN VERIFY THIS MOTOR IS IN GREAT WORKING CONDITION. NO SMOKE AND STILL STRONG AS A NEW ONE. NEED IT GONE QUICK. EVERYTHING BUT THE PULLEYS COME WITH THE MOTOR. I GOT...

F/S:03 Cobra 2.6h KB, s/c intercooler, Afco heatexchanger, Canton tank,headers ect. Almost new 2.6h kenne bell with 500 miles on it... comes with 2 belts, 2 pullies, accufab throttle body, 3000 sct maf, steeda intake and 65lb. RC Racing flow matched injectors. $3500 03 cobra longblock built...

looking for cobra engine to go in my 98 cobra lifter started ticking it has 186000 miles