kenne bell

Hey all! I've been looking into getting a 2.1 kenne bell for my cobra but i don't like that it has no intercooler... So i come up with this idea.. I found a cheap set of C-heads at a local salvage yard and was wondering what if i get an 03-04 cobra lower intake and buy the liquid cooled kenne...

Just like title says. Extremely gorgeous Shelby for sale! Decided to make some additional investments and am parting ways with my beauty for now. 2012 Shelby GT500 black with 34xxx miles. Clean title Car does have a lien. VIN: 1ZVBP8JS6C5249426 Car runs like an absolute dream. Has loads of...

I'm sure many of you have seen have the video listed below. I'm just wondering if anyone has any information on the car today. Same setup? Owner? Or previous owners? There was a video listed from September of 2016 with a black cobra on PA plates that claimed to be the same car but it was a...

2.8H with 3.75" and 3.5" pullies (also have the KB removal tool). Great shape. Intake plenum is powder coated black and snout is polished. Car made 652whp on only 18psi. Really needs an owner that wants to run it out to 24psi and push towards 800hp. Oil changed regularly with only KB oil. I...

hey guys I am having an engine built at the machine shop using the stock Kellog crank, Stock Manley rods, I need to order pistons suggestions on make and what compression? 2.8 kenne bell mammoth lc 3.5" Blower Pulley Lower pulley Metco 4# ARP Head studs Still has t56 manual transmission...

Berore I purchase a new blower I wanted to see if there are any good conditioned whipple 2.9/ kenne bell 2.8 out there. Let me know what you have or know of anyone who is ready to sell now or in the next few weeks. Thanks a lot

Looking to upgrade me 03 cobra from a ported eaton to a whipple 2.9 or kb 2.8 or possibly 2.8 mammoth. Any recommendations out there? Also anyone have any issues buying a used one?

Im on hinesville ga, but willing to travel max 200 miles. Im looking for a 03-04 cobra, black or blu preferred, but anycolor really. Anywhere from stock to mildly built. Hopefully somewhere in the $15k-$25k range

-Kenne bell 2.6H -Single blade throttle body -Bf idlers -Cc plates -High flow catted mid pipe magniflow catback -60lb injectors -Kenne bell boost-a-pump -Weld rts drag pack 15x10 -Mickey Thompson 325x50x15 -Stock wheels included -Battery relocated in trunk -Spec 3+ clutch -3.73 Solid rear...

Sold

I just installed a BAP this weekend, but there wasn't a knob in the kit. The instructions are written like someone was on LSD. 1. Is there supposed be a knob? There was a post from a couple years ago that they were discontinued. 2. If the knob is needed for adjustment, then what...

hit me up if you are wanting to sell your 3.6 or 4.0 whipple or kenne bell text 214-617-5533

I'm selling my full kenne bell kit with everything needed for 99-01 cobra or Mach 1 with the 8 rib belt conversion and all the accessories also included. Supercharger in excellent condition made 628 whp at 16 psi on my Mach 1. Selling kit for 4900 with everything needed you can text me at 909...

I will be buying a TERMINATOR cobra come spring time here in Minnesota! Just curious what my options are! My top dollar it $17k and will be flying or driving to see the car and would like to know everything upfront! Preferably looking for a Black, Torch Red, or Sonic Blue.. Must have less...

I've owned 2 SB Cobras and I'm looking to buy a 3rd and final one that I plan to keep, so I'm looking for specifics. Low miles (40k or lower) 600+hp (preferably closer to the 700 mark) Must be able to pass Emissions (No check engine or warning lights on on dashboard) Must be mechanically sound...

Looking for a low-mileage KB 2.8 Mammoth; non-LC preferred. Prefer a black case but will consider a polished unit. feel free to contact me at [email protected] or text me at 901 493 1099 thanks, Craig

Hi, I am the owner of a 2004 Mercury Marauder seeking information about the timing cover and supercharger retrofit, particularly if there are any similarities between the timing cover for the Mach 1 and the Marauder. Kenne Bell makes a nice kit for the Mach 1 using single-belt drive and short...

Gold Standard Hurst and Kenne Bell join forces on a turnkey, 750-horsepower Mustang By Steve Turner Photos courtesy of Ken Latka/Television Motion Picture Car Club Performance West Group is the builder of limited runs of Mustangs and other performance vehicles that wear the Hurst brand. This...

This is the 2.8 liquid cooled blower comes as complete kit has the Vmp under hood ice tank Vmp triple pass dual fan heat exchanger id1000 injectors 168mm throttle body jba long tubes (1"7/8) with off road h pipe 8, 10, 12, &15 # pulleys comes with a regular black belt and a gates green...

Hello everyone I am a new cobra owner and this is my first time posting on this site. A little backround my first mustang I owned was a 2004 gt which I put too much money into for a 2v lol which I sold before I joined the army and now I am station in fort hood tx and bought my 2004 black cobra...

Can someone take a measurement from the front face of supercharger pulley to the back of the Mammoth inlet. I need to know the overall depth. I am trying to install it on my 03 Cobra to 93 foxbody swap project. I'm not sure if I have the room before it hits the firewall on my foxbody. The...

I have a 2004 Screaming Yellow Cobra that I have been thinking of selling. The car is in Edmonton Alberta Canada. I am the second owner (no accidents). The car currently has about 43,000km (26,800 miles) Mods include: 2.8H Kenne Bell Lethal Full Return (1400HP) Fuel System with upgraded lines...

Pittsburgh PA Text 412 303 7340 for pics First and foremost, there is an issue with the engine. On a full throttle pull, 4th gear it sucked all the coolant into the block itself. I believe it has a blown head gasket and maybe a spun rod bearing or bent rod. Starts and runs but very rough and...

Had this on my car when it was pullied. Only around 5k miles on it. Took it off when I went to a full return system. It's in 100% working order. $200 SHIPPED obo PayPal gift or add 3.5% to cover fees, or USPS MO only. Fastest way to reach me is text at nine03267nine290

(1) Kenne Bell BAP $175 (1) Unmarried Predator III Tuner $75 (1) Stock Eaton Supercharger (removed at 56k miles) $300 (8) 39lb Fuel Injectors (removed at 56k miles) $90 (1) Stock Throttle Body and Plenum $100 Any questions feel free to contact me [email protected] 314-856-8305...