Search results

So after reading through several threads from you guys on here, I decided to swap out my current NGK TR6 spark plugs for some colder TR7ix iridium plugs. I did not gap them at all, and just threw them right in out of the box like what was reccomended. My car is an 03 Cobra with a Kenne Bell 2.6H...

I recently started a thread on here about deleting the boost a pump Hobbs switch from my 2.6H Kenne Bell Cobra. The intial results were great, the car felt like it pulled through the rpm's much smoother! Well not too long afterwards, my car started falling on it's face when I would put the...

My Kenne Bell 2.6H Cobra has a 3 3/4" pulley which should be good for around 15-16 psi, although according to the stock boost gauge it looks more like 12-13 psi. Atleast that's what it looks like to me judging from where the needle lands, it would be right at around 12-13 psi area if I had the...

Hey guys, I've been meaning to clean up my vacuum lines for awhile and decided to start messing around with it yesterday. My car has a Kenne Bell 2.6H that was installed by the previous owner and although everything seems to be hooked up correctly, I can't seem to figure out what this thing I'm...

Hey guys, about a month and a half I put in an order through Lethal Performance for the Billetflow 4 piece idler set and they still haven't been sent out to me due to the fact that, they are waiting on Billetflow to produce them. I even saw now that it looks like it will be at least until June...

Selling the Bassani SS Cat Back that came on my car before I switched out to Stingers. I would say the exhaust has 5,000 miles on it at the most. Brand new it's a $750 exhaust system. Not sure how much these things go for used, but I'll start the price at half the original price, so $375. I also...

I am trying to figure out if I need to adjust my pivot stud inside the transmission bellhousing for my Mcleod RST/Fidanza Aluminum flywheel set up. Looks like there's already an adjustable pivot stud installed, do you think it would be ok to run the pivot stud at the factory height, or do I need...

I am in the process of replacing my pilot and throwout bearing due to some noise I was getting from my Transmission. While I have it apart, I'm replacing my current Ram clutch with a slightly used Mcleod RST clutch that was barely used in the car previously. Well one of the things I noticed is...

I bought my 03 Mineral Grey Cobra about 5 months ago from the original owner who had a Kenne Bell 2.6H installed by a shop. It looks to me like the shop that did the install did a good job, although I've noticed there are some vacuum lines that were capped off. I was wondering if anyone could...

It was a nice day out last Friday, so I figured I'd take the Cobra to work. Well on the drive home from work I decided to rip through some gears which was really fun of course! Well I come up to a stop at a red light and I hear this clanking noise. I thought to myself oh crap what could it be...

Ok, so I know this has been covered a lot throughout the past and I've searched through a bunch of old threads, but I haven't been able to find anything as of recent. I have been trying to find the best deal for a Borla Stinger Cat Back, but can't quite come up with a decent price. Seems like a...

Looking for either the stock slatted style scoop inserts, or one of the metal ones made by fore Precision Works. Can you still buy the ones from Fore brand new?

What do you guys think of these? I kind of like how edgy they are and think they would go really good with the new edge body style. Anyone tried them yet? If so, is the fitment good?

Well, we just got done doing our yearly secret Santa gift exchange at work, and one of the employees (my friend that works right next to me, and has to hear me talk about Terminator Cobra's everyday) got me this sweet book on the creating of the "Terminator" Can't wait to read it! :rockon:

Hey guys. I just installed my jlt next gen ram air intake, and was wondering what you guys thought about the heat shield it comes with? I noticed that a lot of people just end up running their intakes without it, and so I was wondering how much it really helps with the intake air temperature...

Selling these basically brand new set of Black Chrome F500's mounted up to Michelin Pilot Sport A/S 3 all season tires. This wheel/tire combination is basically brand new, with estimated around 1500 miles on the set up. The reason I'm selling these, is because I already have a set of black...

Happy Friday everyone! I have no use for the OEM exhaust that was included with my 2003 Cobra when I bought it. I believe the previous (original owner) said that the exhaust only has a couple of thousand miles on it. Make an offer!

Hey Guys. Looking for an OEM fuel door in the color of Mineral Grey. I might be open to buying one of another color if I can't find one in Mineral Grey. Thanks!

So last Friday I took my kb 2.6 2003 Cobra up to Fast Specialties in Vancouver, WA for a dyno tune. Anyways, the car ended up putting down 516rwhp/473rwtq on a mustang dyno with I believe the tuner said 15 degrees of timing (could be wrong) with a 3 3/4" pulley (14-15 psi). He said it was a...

Looking for someone willing to part with their bassani cat delete tubes. Right now I'm running a Bassani catted x, though I'm wanting to go with an offroad x set up.

Just bought my 03 Cobra which has an aftermarket magnum T-56 transmission. The stock transmission was pulled out of the car at 48,000 miles and works perfectly fine. 1500 obo.

As some of you may know, I posted a thread earlier today about the 03 mineral grey cobra I just purchased. It has a kenne bell 2.6 running a 15lb pulley with a kenne bell cold air intake filter as well as a kenne bell performance chip. My plan is to get it dyno tuned as soon as possible, but was...

Hey guys! I use to be on this forum years ago when I had my 98 Cobra. Well I'm finally back in the mustang game! Just picked up a smoking deal on a 2003 Mineral Grey Terminator with 49K miles. I purchased the car for 15K with a couple of big mods, like a 2.6 Kenne Bell supercharger, and a Magnum...

Hey everyone. I hate to say it, but I am selling my 1998 SVT Cobra. I really love the car to death, but it just isn't the right timing for me. I have recently picked up the sport of Motocross, and i just need something more pactical for hauling my bike around. The car is really clean with its...

Is anyone on here running these? And if so, how do they compare to steeda/march pulleys? 96-00 Mustang Billet Aluminum Underdrive Pulley Kit Polished