I've been porting cylinder heads for a long time and I've owned coyote cars, but never got around to working on the heads/intakes on them. Recently, I agreed to port a set of heads and an intake for a friend of mine who has a procharged coyote swapped fox.
I was able to find some very good...
I'm trying to remove the ABS pump and clean up the engine bay of my '99 cobra. Has anyone replaced the front lines with lines from a non-ABS car from 96-98?
LMR sells new line kits:
https://lmr.com/item/LRS-MU1074SS/mustang-v6-stainless-steel-brake-line-kit-non-abs-98
I DO NOT WANT THE...
I bought a set of 3.31 gears out of a 2014 mustang and tried to install them into my 99 cobra with '00 solid axle swap. However, I can't get the gears to pattern correctly. I'm all the way down to NO pinion shim, and it is still needing to go back to get proper pattern.
Anyone know if there...
Wilwood Front brake pads part number 15E-8298K
http://www.wilwood.com/BrakePads/BrakePadsProd.aspx?itemno=15E-8298K
$65 SHIPPED
I put 150 miles on these pads and decided they are too aggressive for what I do (mainly just cruising). These are a high performance / race pad.
Will fit these...
ALL PARTS ARE FROM A 1999 COBRA
Coolant reservoir - $35 shipped
Windshield washer reservoir - $25 shipped
ECU eec-v ZMR2 - $55 SOLD
Gauge cluster - $85 SOLD
Starter, motorcraft - $55 SOLD
C&L MAF housing, MAF sensor, big filter (tube to throttle body not included) $45 SOLD
Cruise...
I have a SINGLE Weld racing Aluma Star 2.0 black wheel.
It is brand new, used for mock-up only. Has never had a tire mounted to it.
It is 17" x 4.5" with a 2.25" backspacing. This is for use on almost any mustang 5 x 4.5 bolt pattern
More info...
I have a SINGLE Weld racing Aluma Star 2.0 black wheel.
It is brand new, used for mock-up only. Has never had a tire mounted to it.
It is 17" x 4.5" with a 2.25" backspacing. 5 x 4.5 bolt pattern.
More info:
http://www.summitracing.com/parts/wld-788b-1704204/overview/
$425 shipped
I have a polished d1sc complete suprecharger kit including a race valve and 3 core air to air intercooler. This also includes a set of 42#hr injectors and a LMAF. I have 2 brackets so this kit will fit a gt OR cobra single bolt or 3 bolt tensioner. the charge tubing is custom tig welded and...
What's a good route for a fuel tank to make 1000+ rwhp on e85 with an external fuel pump?
Can the stock tank be sumped without issues?
Seems like the only option is the glenns performance tank, but $400 is hard to swallow.
I'm selling the engine out of my 1999 cobra with 91,000 miles on it. Teksid block motor.
Complete engine! Runs perfect, no leaks, doesn't smoke or burn oil. Mobile 1 full synthetic oil always used, changed every 4k miles. Reason for selling is I'm putting a bigger motor into the car.
Comes...
2013 Mustang GT Premium
Ignot silver
5.0L Automatic
26,000 miles
Tinted windows (kansas legal limit)
ALL MODIFICATIONS HAVE BEEN ON THE CAR FOR 4,000 miles
D1SC Procharger stage 2 kit
SCT Handheld programmer with tunes for E85 and pump gas
Racestar Industries Darkstar wheels
17x4.5 fronts...
I'm having trouble getting the car to hook on the street.
Symptom: hooks initially, but starts spinning at the top of 1st. Then shifts to 2nd and blows 2nd away. I can pedal 2nd and get it to hook after a few pedals, but by then the race is usally lost. I also have to manually shift it or it...
Procharger Proflow bypass valve with filter. 1.5" rubber hose included. Can be used with any turbo/supercharger setup. If filter is removed, it can be used as a recirculating valve.
$50 shipped
Procharger stage 2 fan shroud and coolant reservoir. Fan not included, but almost any aftermarket fan can be mounted to it. The bolt hole pattern will accept Spal, permacool, etc fans. Or just drill new holes for whatever fan you want. Stock controller mounts to top of shroud. Coolant reservoir...
I'm trying to diagnose a leaning-out issue with my car. The signs all point to a weak pump, but I shouldn't be at the horsepower level to need a big fuel system, so I'd like to throw another stocker at it first.
Does anyone have a known-good stock fuel pump they would sell me for cheap?
Thanks!
I've been fighting this problem for months now and can't figure it out.
Issue: Leaning out 6600 rpm. Fuel pressure holds at 50+psi throughout the pull.
The car will respond to tuning changes below 6600, but no matter how much the MAF frequency is changed, it will not change above 6600...
I made several changes to my car over the winter (a bit more power) and now I'm running out of fuel in the upper RPM.
I've got a KB boost a pump at 18 volts. Probably mid-high 600whp. I know people are making more hp on the stock pump so I'm wondering what voltage are they at to make 700+ on...
Over the winter, I installed a new intercooler (resulting in a new MAF location) and went to Bosch 105 lb/hr injectors (80lb previously).
After tuning for the injectors and MAF change, the throttle is closing for almost a half second between shifts. Also, the Load is at 3.0+, where last fall...
Over the winter, I installed a new intercooler (resulting in a new MAF location) and went to Bosch 105 lb/hr injectors (80lb previously).
After tuning for the injectors and MAF change, the throttle is closing for almost a half second between shifts. Also, the Load is at 3.0+, where last fall it...
I was hoping to buy a complete battery relocation kit, however the only thing available are "universal" kits, which don't come anywhere close to providing everything needed for the install.
I ended up having to buy components from 4 different places, and had to make several trips to the...
Has anyone switched out their power seat track for a manual one?
I'm not only looking to save a little weight, but I also like the manual seat better (power seat is slow moving from full forward to full back each time the wife drives the car).
Anyone know if this will bolt up to the stock...
My car starts to run out of fuel at 7200 RPM. Is it the pump or the injectors that's holding me back?
E85, 9 psi (@7000 rpm)
80 lb injectors, stock pump with KB BAP