Search results

Have a set of shelby 20" staggered cs-1 wheels/tires for sale or trade for a drag setup. Fronts are 20x9 with like new nitto invo 275/35/20 tires and rear are 20x11 with nitto invo 315/35/20 tires with about 65% tread left. No curb damage to the wheels, they are in good condition. Located in...

Looking to swap a tremec magnum xl into my 08. Pm me if you have one for sale. Thanks

!!Mustang Week Deal!! Bogart Racing Drag wheels with tires $1500 !!sold!!

Hi, I am selling my bogart d10 drag setup off my shelby. They are 17" fronts and 15" rears with M&H 28" front runners with Mickey Thompson 28" ET Streets out back. Wheels and tires are in great condition and include center caps and lugs. Only 15 or so passes on the tires, lots of life left...

So, my stock cltuch on my 08 started slipping last time out at the track and I am about to pull the trigger on a new McLeod RXT. After researching, I am kind of confused on which one I need to get and what the differences are between the different sets. The one for the 07-09 GT500 is $1320 from...

Sold!!!!

Has anyone tried the new on screen guage/display datalogging feature on the new x4 yet? I just picked up a new x4 while I was down in Charlotte for the 50th and while playing with the gauge display the Downstream Air Temp pid is not working. It used to work on my old x3 when I would datalog...

Finally broke into the 6s last weekend with my 2.6 upper only stock eaton 08 gt500. Only power mods were the upper pulley, intake, off road xpipe, and tune. Car ran like a rapped ape and I had a blast. Planning on doing some front shocks, WOT box, and maybe some 3.73 gears to replace the stock...

Finally got around to getting my car dynoed this past weekend while I was down in daytona, fl for the turkey rod run. Vmp tuning had their mobile dyno jet down at the show so I figured what the hell, might as well give it shot and see where I'm at. Only mods are 2.6, jlt 123mm, orx, and a...

Looking for some front 17x4.5 and rear 15x10 with 7.5BS race star drag wheels for my 08 gt500 with or without tires. Im located in upstate sc area. Pm details and price with what you have. Thanks.

Looking to buy a set of drag wheels for my 08. What 15 inch wheel size/backspacing do i need to clear the brakes on my car? I dont want to run spacers and i heard race star makes a wheel that will clear both front and back. I already have the rear swaybar relocation kit installed. What wheels...

Like the title states, looking to purchase a used dynotech 1pc alum drive shaft for my 08 gt500. Pm me details with price and pics, thanks.

I was just wondering what kind of trap speed people have got in the 1/4 mile on their 07-09 gt500 with 2.6 upper pulley, intake, and tune only. Stock weight, stock gears, stock wheels except for drag radials out back. I'm currently doing 120 with outside temps around 75 deg and IAT2 temps...

My buddy, who has an 03 cobra, and i are heading to atlanta dragway this friday for their fri night street drags to test out the new pulley i just installed on my 08. Has anyone ever been? Im about 2hrs from the track and want to know if its worth the drive. Also if anyone else wants to come out...

I just got an aem wideband and want to go ahead and install it soon. Can I take the rear 02 sensor that is in the cat out and put it there? I know the readings will be off, but by how much? If it's only a tenth or so I can compensate for that. I see some dyno tuners tune with a tailpipe sniffer...

I'm using SCT advantage 3 to tune my gt500. Is there any way to disable the traction control on an 08 GT500 and not have the check trac control sys message come up on the dash instrument cluster every time I start the car? The way I did it was under axle and then I set trac control switch to 0...

Hey I am looking for some help from a fellow svtp member. I just bought a metco 2.6 pulley and hub for my 08 gt500 and need to borrow a pulley removal/installer tool from someone if possible. I would like it to be the newer vmp or lfp tool that clamps onto the pulley itself and doesn't push it...

Hey all, I data logged my bone stock 08 gt500 at the track the other night and have some concerns. My maf counts were 990, injector duty cycle spiked 98%, and fp duty cycle 93%. All seem high for being stock. From all the research I've been doing it seems the stock fuel system is supposed to be...

I found a jlt intake from a 2010 gt500 and was wondering if it will fit my 08? Anyone know what the differences between the years are. On the jlt website the pics look similar and the prices are the same. Are the mounting points for the heat shield different or something

Im going to be adding an intake to my 08 gt500 and its my understanding that this will throw off the maf calibration in the factory tune. I have a pro racer package and would like to adjust the transfer function to compensate for the new intake. Problem is i dont have a wideband yet to measure...

Looking to buy a 07-09 jlt 123mm intake and a moroso intercooler ice tank. Pm me details along with pics and asking price. Paypal ready. Thanks.

Looking for an aftermarket aluminum intercooler ice tank that mounts in the factory location on my 08 gt500. Pm me details along with pics and price shipped to SC. Thanks

Hey all, I just recently purchased a stock 2008 gt500 and last weekend a buddy of mine and I went to the local 8th mile track to get in some runs. Now he has a pullied and ported 03 cobra and my car is bone stock and after a 1 hr cool down from driving to the track my car was still showing...

I have a vin locked sct 3015 x3 tuner for sale. Has preloaded 07 GT500 tunes, and custom JLT intake and pulley tunes. Can be unlocked by SCT for $150. I just bought it and the member who sold it to me lied and said it was unmarried. He wont return my calls or refund my money so I'm trying to...

Hi all, just picked me up a stock 08 gt500 and was thinking about putting a tune on it with my pro racer package. I used it to tune my 03 cobra, so i am familiar with the software. Does anyone know what things to look out for and change when tuning a gt500? How much timing do most run on 93...