Search results

Hey guys, I’m looking into upgrading my Mach 460 system in my 2000 GT. I was hoping to just plug and play some better speakers into it but it seems like it’s a pain to change anything aside from the head unit. I grabbed a couple sets of speakers from Best Buy during a sale but I’m not sure what...

As it sits in the pictures. The project sits 4ft from the wall and 24in off the ground. The low part of the step sits 21.75in on the wall and I can lift up on the projector to get it to 22in. It seems as I’ll have to mount it at an angle

Hey guys, I’m in the middle of retofitting my protectors but not sure how the proper fitment should be. From what I could find, the mini h1 projectors with mini Gatling gun shorounds don’t have to be cut but mine barely fit even without the shrouds in place. I’m able to fit the shrouds one...

The way things worked out I was stuck either paying a few hundred for labor to put the car back together or continue the job after the car needed more parts replaced after the initial $700-$800 quote. One of those things where paying a few hundred to take the car to another shop seemed like more...

Had the car taken to a shop and apparently the bearing was toast and they don't replace only one bearing so all the bearings needed to be swapped. One thing lead to another during the repair and the wheel bearing/axles needed to be replaced. Fast forward and a $700-$800 job turned into a $1300...

Hey guys, I recently put an aluminum driveshaft in my 2000 GT and while it was off I noticed the pinion seal was leaking on the diff so I replaced it. I did some research and followed the method of marking the the pinion but/shaft/flange and removing the nut while counting the rotations. Sure...

The car is a 2000 GT 5-spd with an intercooled p1sc. The car has a tial qr venting to atmosphere, 42# injectors, 04 cobra fuel tank, ngk-6i spark plugs. The car drives fine beside 2 issues. 1. After driving the car and letting it warm up, if I shut the car off to run into the store, it has a...

Hey guys, the car is a 2000 GT with an intercooled P1SC running a 3.5 pulley. Other mods are: - Tial QRJ (planning on recirculating in the future) - 42# injectors (cleaned and flow tested at Hurst Injector Service, great work and customer service) - VMP HPX 5000 maf - NGK TR6ix plugs - 04 cobra...

Cancel....figured it out

Hey guys, so I have the ngk tr6ix iridium spark plugs. From what I've read the gap should be 0.32-0.35 for the tr6 and I'm planning on running 0.35 on a 2000 GT with an intercooled P1sc at 9-10 psi. Being that the iridium run slightly hotter, should I run the gap different from the coppers?

Anyone have a front crash bar for the 99-04 mustang? (GT, but I doubt there's any difference) Cut mine up but dont feel like having it welded up to fit what I need. Let me know what you guys have. Thanks

Sold!

Does anyone know if the 05+ GT MAF is the same as the F150 or other models? I checked with the local junkyard to see if they had any available and was told they have some for $30 including the housing and they fit the mustang, focus, fusion, Taurus, F150, etc... My car is a 2000GT and I...

I'm in the process of installing a P1SC on my 2000 GT and was planning on ordering the TR6's when I came across the TR6ix's. I've heard that platinum and iridium are bad for boosted applications compared to copper but from searching, there's quite a few Cobras running the tr6ix with better...

Anyone know of a good local welder or shop in the Worcester area? Need to get a couple things on the car welded up Thanks

Hey guys, as the title states, I'm looking for a Procharger P1SC inlet/intake tube for a 99-04 GT. Thanks

Hey guys, Im was looking to run a Tial Q BOV on my procharger set-up but after watching some videos it seems to be more on the obnoxious side. I dont mind the louder discharge when shifting or letting off after a hard acceleration but the constant venting during normal cruising would be too much...

Anyone have experience with the Toyo T1 Sport or Vredestein Ultrac Sessanta? I'm currently running the Toyo t1R's and am really happy with them. Unfortunately, they discontinued them and replaced them with the new T1 Sport. I stopped in a local town fair tire to check the T1 Sport and...

Im looking to do an 03/04 cobra tank swap in my GT. Does anyone have a stock fuel hat and pumps for sale? Thanks.

Accufab tb causing poor drivability I installed an accufab 75mm tb and c&l plenum today and the drivability is horrible. The idle hangs around 1200rpm and it has multiple surge issues. While driving the rpms spike to 2000-2500rpm and hang there for a few seconds everytime the clutch is pressed...

Procharger P1SC pulley size? Hey guys. Just bought a procharger p1sc kit and am going to run a CX racing front mount intercooler but I'm not sure what pully size to run. The car is a 2000 GT with the following mods MAC cai Accufab 75mm tb C&l plenum Bassani off-road x pipe Borla "quiet"...

Do anyone know what is needed to change a vortech supercharger kit from an aftercooled set up with an 03/04 cobra heat exchanger to an air to air intercooled set up? I've heard intercoolers are better suited for a daily driver. Would it be worth the money to switch over? Thanks

Anyone install an eibach rear sway bar on a 99-04? I got the stock rear bar out with no problem but the clip/bolts won't fit on the new bar. Anyone run into this problem?

Anyone one of a good body shop that really pays attention to details in the Worcester area of anywhere in MA? I have a set of 2 piece Saleen c-pillars that i tried to install but the fit seemed completely off unless i was doing something wrong. Id like to get them put installed but would prefer...

Im looking to replace the blown lower door speaker on my 2000 GT. It has the factory Mach460 system in it. Im not looking to go crazy and replace everything but would like to upgrade door speakers for a little better sound since the divers side is blown. Will these JL audio's fit and work...