Search results

I have a K/B boost a spark for sale. I never used it and sold the car. $175.00 shipped.

I bought this car, and just built it. Only about 250 miles on the car sens I bought it. Just really not what I want. I just bought a new street glide and am looking more to a new GT. This car is just to fast for a street car. Looking to part it out but will not sell anything to the sort...

MSD coils used. Going coil on plug. They work fine. $50 for the pair.

I have 2 38MM waste gates(13# springs), 1 50mm BOV and one intercooler for sale. I/C is 3" piping, 3" wide 30" hose end to hose end. 11 3/4" tall. $150 for both gates and the BOV $150 for the I/C All have less the 150 miles on them. I just bit the bullet and spent over $1,000 and...

Few things left for sale. underdrive water pump pulley. Needs cleand. $35 shipped Mac Hi flow cats for long tubes. Local pic up $100. Will ship but at buyers ex. MSD coils used. Going coil on plug. They work fine. $50 for the pair. C&L 90mm M/air (from my old fox) $50.00...

I have these items for sale. I like to just mkae it easy and inclued shipping in the price to any place in the upper 48 states. Plus pay pal fees LRS-SPDCAL2 new in box... SOLD 1996-04 Mustang Speed-Cal Speedometer Recalibrator for Manual Transmission Only This is a SCT switch from a...

Hello, At this time I have a 97 cobra, stock ECM. Fresh built 4.6 @ 9.3:1 ish C/R ported heads/cam's MMR intake(No IMRC's) Glenn P 1000HP fuel system. 78MM turbo. (Looking to go 18-20lbs) TR7's at 0.022 Could not get the car tuned, It would break up at 5,000RPM and above. Stoped...

I just got a HO fiber trends 3 1/2 cobra R hood yesterday. It's a bit bigger then I want to run. I would like to sell for $350 picked up. Or traid for something lower but not stock. This cost over $500 after tax and shipping.

I am trying to just start my car after the full build before I take it to get it tuned.To make sure I have no leaks and go over all the turbo piping. I don't have a tuner yet. I have a Xcal3 3000. My friend has xcal2 software. He sent me a base tune in a CEX file but I cant convert it...

Im looking for the lower hose set up from a 96 to 98 GT. I removied my oil cooler and need to run the GT style hose. let me know how much shipped. Thanks this is what i need. http://i104.photobucket.com/albums/m188/99atlbluegt/On3%20Turbo%20Install/2011-07-09013612.jpg

I need the 2 side gears from the 03/04 cobra's 8.8 read traction lock. They are 31 spline. I don't need the clutchs. Must be in good working order with no cracks. Let me know what you have and price shipped.

I changed out my gears from 4:30 to 3:55. Looking over the ford racing 31 spline track loc, The larger spider gears are stress cracked. Everything els looks good. Can I buy the the 31 spline axle gears. The ones that hold the clutches? Dose anyone have a good set laying around that are not...

Hello all, Im geting down to the end of my build and its time to change the gears. This is my 97 cobra with a built long block and turbo. The car came with 31 spline axels and 4:30 gears. They made a lot of noise. I removed the rear end from the car and pulled it all apart. In the...

I need the oil filter adaptor off a 03-04 Mach1. Whilling to buy or traid for mine off my 97 cobra. Im using a mach1 WAP block and from my understanding it has a larger coolant opening, and Im doing a turbo built so I need the room.

WTB 2V 4.6 oil filter adaptor . also need a oil filter relocation kit. cash in paypal, send pics to [email protected]

I have a 04 Mach block going in my 97 cobra. I need 99 up knock sensors for this block. Im not sure if they are plug and play, or what but I need them (2). I dont want to buy new to find out they are not what I need, so id like to find a set of good used ones. I also need a crank pilot...

knock sensor* admin, you can fix title if it you have time. Thank you I have a 97 cobra. I started a built short block, was a cast iron. Solt the stock +100,000 mile stock block. Any way I ened up getting a 2004 Mach Alm WAP block. Low miles, and built that. Are the knock sensors from...

All, 4.6 4v I just got my motor back from the builder. New 03/04 block Manley rods and pistons, forged crank. I did the ARP2000 rod bolts and main studs. They look to be right. When looking at the side bolts, they look to me like the stander grade 8 industrial cap bolts we use at...

Looking to put a auto in the 97 cobra. Doing a turbo build and would like to put a auto in if from the start. Astro Performance Semi-Pro T45 good for 500 tq(installed at 98k miles) ^26 spline input shaft, carbon lined synchros, cyroed 1st-4th gears etc Spec stage 3 clutch(600 miles on it)...

Hello Im putting together a 4.75 stoker car with cams and head work. Looking to go around 800HP with a turbo. Should I just run a stock oil pump? What adjustable came gears are good to use? 97 Cobra

I have a set of 4:30 FMS gears that im taking out of my cobra.. for sale or trade..

Hey everyone, I ordered a short block, sent out my heads and got new cams to. My questions is what is everyone doing for cam chains? Re-use the old ones? Replace it all? Go ford? Stock gears? old stuff has 103,000 miles. Look good but who knows?? Sorry, Im just stuck with what I should...

These are off my 97 cobra. They are for long tubes. $200.00 picked up 0r $240 shipped. URL=http://imageshack.us/photo/my-images/31/photo0p.jpg/][/URL]

Im looking to buy: cowl hood for 94-98 mustang. (Have a stock Red 97 cobra hood that I could traid.) Mach1 seats, front and or all 4. a roll cage boost gage, AEM wide band, pod, any location in car. Thanks

Building a Turbo car and thinking of going Auto. Looking to traid for a built auto, Astro Performance Semi-Pro T45 good for 500 tq(5,000 miles) 26 spline input shaft, carbon lined synchros, cyroed 1st-4th gears etc Spec stage 3 clutch(600 miles on it) Findanza aluminum flywheel Steeda...