:shrug:My question is simple, how do you defend yourself when the ticket is for unsafe speed? I could give all kinds of info about what was going on at the time but it is a fact “from my point of view” that nothing was unsafe nor above the 65 mph speed limit on this 3 lane I45 and there was no...
This is a new rebuild with less than 4K on it and she is drinking oil like me with a case of beer on a hot summer day. It is not smoking and the plugs look text book. I pulled the engine again and replaced the valve seals and that did no good. Comp is 185 to 190 on all eight cold with no oil...
Ok...I will start. Pulled engine and replaced all valve stem seals and check all I could to insure engine as it should be. Stabbed it all back in started it up all is great. Went to put the clutch cable back on and guess what.....the clutch fork is still on the bench....well shit. Pulling...
I pulled the engine, and replaced all the valve stem seals. I tested all piston compression at 190+ psi before I pulled the engine. Out of the car after replacing the seals I put 32 psi into a cylinder, set the torque on the torque wrench to break over at 4 o'clock on a known good cylinder and...
I got out of the Army in 86 and in my day we did not train on IED detection. I have been thinking about how they can be detected and have an idea I think might work but not sure who to talk to or how to pass the Idea along to DOD. Before I do any more about this Idea I thought I would ask the...
If all that is in the universe came form the big bang then what was in the space of the universe before the big bang and where did all of it come from?
Ok now my answer: The universe is now in its expansion stage. What is in the universe has always been in the universe. It will expand...
:banana:Now that I have the Cobra back on the road it is time to start work on converting this 96 mustang I bought to a total drag car with a Cobra engine that is on the stand waiting for my attention. I am asking all their ideas on what I should do to make the most of this stock engine. I am...
I have never been a big fan for IMRC delete for a DD, but am in the process of installing a fresh rebuilt engine and notice on the old one I am removing that the secondary intake valves look like s*** and the primary are as clean as a baby's butt. Could this be a sign that the IMRCs are not...
:banana: I bought a 96 mustang that I plan on converting to a drag car only to run brackets at the strip. Not looking to build a 5 second car or anything just a car that runs a good time. I have a corbra engine to go in and I know I will need a diffrent rear end because this car is not even a...
:banana: I bought a 96 mustang that I plan on converting to a drag car only to run brackets at the strip. Not looking to build a 5 second car or anything just a car that runs a good time. I have a corbra engine to go in and I know I will need a diffrent rear end because this car is not even a...
:shrug: I had to remove the driver side valve cover looking for yet another new noise. Getting it off is one thing but anyone have any tricks getting it back on with engine in place? :shrug:
I am needing to change out my Throttle body (98 cobra) and Ford is telling me they no longer sell them. So I am looking for after market. I want to stay with stock so anyone have any thoughts on the best after market unit?