Recent content by 1badblownstang

After almost 2 years of building this car, my crazy ex-wife got to it with a sledge hammer and some spray paint. It's fixable, but every time I look at it it reminds me of her, so I'm either going to give someone a great deal on everything or part it out. I am open to trades on just about...

Finally got my 8.8 and decided to sell the IRS. It does not come with calipers or caliper brackets I used those on the 8.8. It does come with brand new slotted and dimpled EBC rotors, ABS wiring, 03/04 cobra bilstien shocks, h&r race springs and everything listed below. The only parts that...

Belts coming off with SC's has long been a problem with many cars. With our cars there is a long length of belt between the alternator pulley and power steering pulley. I made a pretty simple fix, just removed one of the bolts from the front cover, got a longer grade 8 bolt, some spacers...

I've been finishing up the wiring and trying to figure out how to finish the trunk area. I have the AEM meth system on the left side, rear mount battery on the right side, along with the cutoff switch, circuit breakers and relays. I bought a billet single bottle bracket for the nitrous to...

I live near Memphis, willing to drive a good ways 0 miles on everything except the dss axles and launch brace, they were bought used and have a few thousand miles on them 3.55's all new parts in differential LPW diff cover Pauls high performance Launch brace FTB complete kit (everything)...

complete stock 2001 cobra air intake, best offer 2001 cobra cams- 100.00 shipped stock 03/04 cobra clutch disc and pressure plate, 8k on it and it is about perfect cond- 75.00 but you pay shipping. fuel line adapter fitting, factory push lock (like our fuel filters) to -8an. This is...

This was done by NASVT a year ago, I ended up going with a sullivan lower/hpp upper. These are not super short runners, they measure around 8-9 inches so really good for just about anything. NASVT charges 750.00 plus your stock intake, I know I'm not going to get what I paid, but I'm also not...

for those pesky busa's. Just a NOS big shot, sprayed through a Wilson Pro-flow plate. 150-400hp capable.

If the local tornado sirens ever go out this might be useful lol. as the video starts I have the controller knob at low, as soon as you hear the fuel pump, I turn the knob to full speed. Just sick! It's a weldon db2025a, controlled by a weldon dial-a-flow. Knob for the dial-a-flow is...

So my 2001 MG Cobra has been down for a year and half. Basically went through the whole car. Here's whats been done: (I'm leaving all previous mods, susp, brakes, bracing etc.) 284 ci teksid block, dss girdle, h-beams, diamond pistons 9:1, Clevite, arp everything, billet oil pump, mmr 9 qt...

First thing up for sale is my NASVT ported short runner intake. It was installed and used to get he car onto a trailer. I ended up going with a Sullivan lower and HPP upper. My lose is your gain, no wait and cheaper, 650.00, you pay shipping. (ported short runners are 750.00 and your old...

Up for sale is a set of 4v kooks headers 1 5/8" to 2 1/2", band clamps, kooks 2 1/2 x-pipe, flowmaster ball and socket collectors (in case you don't like band clamps) these are the JDM Kooks headers, not the newer stainless kind. 600.00 plus shipping for everything. Try finding a cheaper price!

had the irs out doing Bruces kit but bolted everything up just to hear it, damn! YouTube - 2001 cobra comp stage 3 cams m55 catcack idle

lets see, in the closet right now: f1 procharger w/race 3core IC, big red bov, iw 10%od pulley, 80lb inj, anderson powerpipe, 3.85 blower pulley, gates fleetrunner greenbelt, all t-bolt clamps, glenns sumped tank, weldon db2025a, weldon controller, mcleod rtx twin disk, built t-56, aem meth...

Complete nitrous system for sale. I highly doubt you will find a more complete or better set up system. It has the following: 4 nitrous bottles: - 1 NX 12lb carbon fiber bottle w/gauge 300 shipped (540.00 from jegs new w/o gauge) - 1 nitrous works 10 lb bottle w/gauge 115.00 shipped (193...