Great photo! Puts the emphasis where it needs to be,,,,that gorgeous body.
Great photo! Puts the emphasis where it needs to be,,,,that gorgeous body.
Loving the strip pics! Nice ride.
Beautiful car!
Thank you much! The DA was poop, and the weather was horrible. Was about 86 degrees. I live in Florida so that’s common. The MPH is there, just the time wasn’t. Best run was 12.6 @124. I’m running the car bone stock before I begin adding my fun parts. Want to get a baseline myself. Heard speculation from another GT500 at the track. There was something in the tune of the car that makes it bog off the line to prevent clutch wear? The car does tend to bog and then pick back up hence the MPH.Loving the strip pics! Nice ride.
How’d she run?
-J
Ahh, so there is truth to that clutch thing. I gotcha, thanks for the info on that. That’s an amazing time! Would you say the 4.10 gears are daily driveable ?Yes! Clutch protection strategy! VERY annoying for a drag launch.
For reference my ‘14 stock down to paper air filter except 4.10s, Lund street 93 tune, 20” Shelby Alcoa wheels with Nitto DRs went 11.0@128 in decent weather but definitely not mineshaft.
Get a tune and it’ll eliminate the clutch protection
-J
Yes! Clutch protection strategy! VERY annoying for a drag launch.
For reference my ‘14 stock down to paper air filter except 4.10s, Lund street 93 tune, 20” Shelby Alcoa wheels with Nitto DRs went 11.0@128 in decent weather but definitely not mineshaft.
Get a tune and it’ll eliminate the clutch protection
-J
When I got my tune from Lund I didn't specifically ask for removal of the clutch protection but when I questioned them about it later they said that they do remove it so yours is probably done.Did Lund remove the program on all tunes, or specifically on ones where that request was made?
I went with a 93 octane, (50 state legal exhaust), and 4.10 tune back in 2018? perhaps. Now I’m very curious about this subject.
My tune was uploaded by Lund Sr at the track in June 2013. At that time he asked me if I was fine with removing the clutch protection and we both agreed it’s definitely necessary to drag race.When I got my tune from Lund I didn't specifically ask for removal of the clutch protection but when I questioned them about it later they said that they do remove it so yours is probably done.
Sold me! Ordering them tonight! Will be getting the car tuned here shortly as well! Thanks for all the information !My tune was uploaded by Lund Sr at the track in June 2013. At that time he asked me if I was fine with removing the clutch protection and we both agreed it’s definitely necessary to drag race.
I do remember reading that it became standard in their tunes but a simple email should clarify.
As for 4.10s and street 110% yes!
Car is SO much better on the street, in every condition and it’s only 2000rpm at 80mph on a 315/35/20.
-J
I always joke that I offer a money back guarantee on the 4.10s, but as a guy whose had 3.73s also, I never expect yo pay out on thatSold me! Ordering them tonight! Will be getting the car tuned here shortly as well! Thanks for all the information !
Okay, so what am I looking at there? LOL.
Okay, so what am I looking at there? LOL.
The wrap I had on there is no moreOkay, so what am I looking at there? LOL.