any regrets on the on3 kit stretch?
would you do it over again?
the price for the kit is pretty good.
is your build thread up to date?
would you do it over again?
the price for the kit is pretty good.
is your build thread up to date?
Does that provide alot of NVH? Its just hard mounted to the crossmember?
any regrets on the on3 kit stretch?
would you do it over again?
the price for the kit is pretty good.
is your build thread up to date?
any regrets on the on3 kit stretch?
would you do it over again?
the price for the kit is pretty good.
is your build thread up to date?
I would just imagine a header cracking is inevitable without any hangers.in on3's defense, there were never any pics of the cracked headers ever seen. not saying it couldnt happen.
I for one made hangers for my x-pipe because I was getting an exhaust vibe.
Shoot me pm's if you got any install questions. I took some pics along the way to illustrate my own ideas on getting this kit on a '13+ as it seems stretch did too.I've got the same questions, I just got a kit and plan on trying to make a lot of power with it. North of 1k
No, there's only one kit that had headers crack. The end user is responsible for fabricating a hanger for the exhaust. If they don't the majority of the weight of the entire exhaust plus the weight of the turbo's is supported by the headers. Not good at 1200 plus deg's!
I think it's silly they don't provide a hanger. On3 is putting there rep at risk by trusting the end-user to make something work.
Thanks for the tips on this. Makes a lot of sense whay one could see some cracking. With this all said though, the Hellion TT kit for instance would need the same thing done? There aren't turbo support brackets on that kit either if I remember right.u can see the "L" brackets I welded to the x-pipe, they bolt up to the extra holes by the crossmember.
Car is sick!!!
Thanks for the tips on this. Makes a lot of sense whay one could see some cracking. With this all said though, the Hellion TT kit for instance would need the same thing done? There aren't turbo support brackets on that kit either if I remember right.
F' it! Gonna buy the kit and give it a try!
Only thing stopping me buying this kit is the rumor of the turbos failing after a couple thousand miles and the shoddy wastegates and possible bov issues. I'd love for someone to prove me wrong as I want to buy the kit but need a reliable dd as well.
I'd really love to go this route over a Paxton with a wastegate setup
Posted via Topify using iPhone/iPad
Me too!! I am pulling motor this weekend to get built and then going back in with the 60's. Better make some big power. I am coming from 10 psi TVS.
Only thing stopping me buying this kit is the rumor of the turbos failing after a couple thousand miles and the shoddy wastegates and possible bov issues.
Posted via Topify using iPhone/iPad
Only thing stopping me buying this kit is the rumor of the turbos failing after a couple thousand miles and the shoddy wastegates and possible bov issues. I'd love for someone to prove me wrong as I want to buy the kit but need a reliable dd as well.
I'd really love to go this route over a Paxton with a wastegate setup
Posted via Topify using iPhone/iPad