Selling my brand new unopened set of front and rear brake pads/rotors that I bought for my old 2012 GT. I never installed them because I ended up trading in the car for my 2018. The fronts will fit NON-BREMBO 2011-2014 Mustang V6 and GTs and the rears will fit ALL 2011-2014 Mustangs. They are...
GT500 14" Brembo Brakes and Rotors for a '05-'14 Mustang.
$700 or best offer.
Selling through ebay:
Ford Mustang GT500 14" Front Brembo Brakes & Rotors (No Springs, Pads, or Pins) | eBay
Included:
Two New 4-Piston Calipers
Black Gloss Powder Coated Finish with White Brembo Logo
2 Rubber...
Looking to sell 4 piston brembo brakes on car as I am going to be upgrading them. Sale will come with 2 4 piston front calipers, 2 z23 evolution sport ceramic pads, and 2 power stop drilled and slotted rotors for extra shipping cost. Looking to get $450 shipped and if rotors are wanted as well...
The 03-04 Cobras have this rubber surrounding the brake and clutch pedals, and I was wondering if anyone could tell me if you could reasonably expect some of the rubber to be missing around the pedals from wear on a Cobra with roughly 50k miles? How many miles does it usually take for that to...
I noticed a strange sound while driving a few days ago. It was hard to pinpoint while driving with the window down but basically sounded like a wub wub wub thrumming sound (I saw someone else describe it this way in another forum and it made sense). Basically it sounds like the one of the tires...
So my brake pedal is super stiff, when I push in the brake pedal I can hear a hissing noise, so I went ahead and bought a new Motorcraft hydroboost brake booster to get on there. So I want to know if it truly is the booster or can it be the lines or maybe calipers? I pumped the brakes with the...
How it Works: Hurst Line/Loc - Roll Control Kits
Application:
Universal and vehicle-specific kits available.
Part #1745000 - Hurst Universal Roll Control Kit
Part # 5671519 - Hurst Roll Control Kit for the 2011-2014 Ford Mustang
Features of the Hurst Line/Loc Kits:
Used primarily in drag...
I received my "SVT Cobra" Baer 6P brake calipers from TPS Motorsports and couldn't be happier. I could have saved a bit of coin and gone with the cheaper Baer 6p engraved calipers but I wanted something different, which TPS Motorsports offered. It took about a month to receive but it was well...
I was changing the rear brake pads on my 98 Cobra from semi-metallic to power stop A-23 series and ran into a problem.
I pulled the calipers, replaced the pads and tried to turn the piston center clockwise to run it back in to reset it it to fit over the new pads.
I used a 12 inch long...
Speed and Style
The Ford GT features styling and colors that accentuate its performance
By Steve Turner
Photos courtesy of Ford Motor Company
We know that Ford Performance engineers pulled out all the stops in maximizing the performance of its latest Ford supercar. From its carbon fiber...
Hello,
I recently bought some Bogart 15x4.5 wheels for the front of my car. Come to find out they do not fit with the stock cobra calipers. I tried a 1" spacer with studs and they still wouldn't clear.
Does anyone know if putting the GT brakes on my cobra would work or remedy the issue...
I started having this grinding or rubbing sound which I THINK is coming from right front tire when I take a sharp left at speed. Best example is when I go around a rotatory without slowing down to less than 20 mph-ish. I'm really not positive if it is even suspension related. There is a TINY...
Alright sooo....I recently just fixed a vibration that I found out to be a bad factory UCA on my 2012 GT. Which ended up damaging my 1 pc driveshaft's yoke I had on there...
But before I did that I had gotten new wheels and tires from American Muscle and upgraded to a set of brembos in the...
Hurst Racing Brake High Performance 2-Piece Front & Rear Rotor Kits - 05-14 Mustang
Hurst Racing Brake High Performance 2-Piece Front Rotor Kit, part #6260020
We only have a few sets of these high performance rotors left and we are blowing them out! Click on the pics for pricing or give us a...
So, I have some new 15x4.5" bogarts that will not fit on the front of my 03' cobra with the stock brakes. I could extend the studs and get a 1" spacer and I'm sure they would fit, but I don't know how far that would push the wheel out. Would like the keep the wheel under the fender is what I'm...
Hey guys I don't know if this is posted in the right section but I am looking for stainless brake lines for my 12 GT500 with the stock 4 piston Brembos. Id like to knock out the front and rear before my next track day. I found the BOSS 302 upgrade kit but im looking for stainless lines I don't...
Howdy!
I have a lot of parts that I need to get rid of. Many are new or lightly used. Feel free to ask any questions. I will get back to you as soon as possible. All parts are located in Houston, TX. All parts will be shipped via FedEx Ground, insured, with tracking. PayPal is the only...
I have an issue that I've been ignoring for awhile, but a panic stop on the highway changed my mind. The ABS isn't modulating smoothly and the front wheels can lock under heavy braking especially immediately before the car comes to a complete stop.
I've got stock brakes with Ford pads in...
Hurst Part #5671521
Application:
Fits 2005-2009 Ford Mustang GT
Description:
Designed with simplicity and ease-of-install in mind, Hurst’s complete Roll Control kits use the absolute best quality, pre-bent, double-walled, stainless steel brake line(s). In many cases, these hard-lines are...
So last week I was driving my new 04 cobra that I've had for maybe 2 months now and it started lunging forward and overheating while I was driving. I made it home and the car wouldn't turn back on until it cooled down. I replaced the thermostat and everything seemed to be fixed. Now this morning...
I believe I need a Brembo caliper rebuilt.
Car only has about 12,000 miles.
Drove it at Sonoma for a weekend and at about 8k and the right rotor warped.
Replaced both rotors and pads with OEM parts.
Rotor is warped again.
I'm assuming I cooked the right front caliper at the track.
Assume I need...