Up for sale is my Kenne Bell kit i pulled off of my 99 2valve. Its a 2.1 intercooled kit with a 2.6 inlet and comes with a 3.25” pulley making around 9 psi.I used a CNC machine for the spacer between the blower and the manifold to fit this kit under a stock GT hood as long as you have the hood...
1998 Bright Atlantic Blue Cobra for sale.
94k miles
$17,000
I’ve owned this vehicle for the past 10 years and made it a point to modify/maintain with the best parts, fluids and brands available.
Engine
SCT tuner unlocked
3 tunes+stock 93 octane (Mike Post)
Royal Purple HPS 5w30 (have extra)...
Hey everyone,
I’m looking to buy an 03 or 04 terminator.
I live in St. Louis, MO.
I would love to have a white one but open to other colors as well.
Even if you don’t have one for sale, if you know of one or know where I can look to find one I would greatly appreciate your help!
Thank you!!!
1997 Mustang Cobra
The car is pacific green and truly a mint piece.
has 67k and is almost bone stock.
Currently on the car is a JLT true cold air intake, bbk catless x-pipe, pypes m-80 cat back, and a bama tune for the intake.
Car is lowered with sr performance springs and sits on true 03 Tenth...
I have recently sent my 98 cobra motor to MMR and im also wanting to do a COP swap but trying to find the covers to go with it. I just bought used set off a 03 Lincoln aviator (4.6 dohc). I just noticed that the pcv ports are little different which makes me think something else could be little...
I've belonged to the Mach 1 registry for a while, looked at this forum several times too. I thought someone here may be able to use these.
I have new Ford manuals to sell.......$200 or best offer for all
2004 Mustang Workshop Manual
2004 Wiring diagrams
2004 Service Manual Powertrain...
I'm in the process of making a list of everything I'll need for a build. I'm planning on going forged internals and was wondering what compression is suggested if I'm going to be adding a D1SC? Also, the previous owner changed the gears to 3.27's. He said it was because he was planning on...
I have an aftermarket JLT air intake coming off the throttle body of my 01 Cobra. The problem is that I want to put a Procharger on my car in the future and from the pictures I've seen is that the Cobra has a stock air intake and the Procharger has an air intake that goes where my aftermarket...
I'm doing a some cleaning and have these magazines from the mid 90's thru current year until 5.0 Mustang & Superford were cancelled. (May be missing an issue hear and there)
Would like to get rid of them hell might even give them away!!!
Let me know if anyone is interested.
i found a guy selling an Eaton m122 from a gt500 and hes selling it for a very very reasonable price, ive got a 2006 GT and i know there is a way to be able install it on my car, but how and what would i need? and is it reasonable for the power??
i came across this video and its exactly how i want my 4.6 to sound like. it has that signature sound ive been trying to obtain. can someone please tell me what exhaust they believe this has the sound starts at 1:00. X or H PIPE? catless or catted? flowmaster 40 or 44's maybe? please help...
So sometime in the near future I want to get a new engine. I am very interested in a 4.6 4v dohc engine and my goal is to have a DD that puts down around 350-400 rwhp N/A. No FI for me. I have done research and have come to like the 4.6 Aluminator which is unfortunately now discontinued. Is...
Doing a conversion swap on my 2004 new edge. Looking to buy a wrecked low mileage (60k or under) mustang gt. I prefer if it still runs for inspection purposes. 5 speed or auto doesn't matter either is fine. Looking around the DC/MD/VA area. Not sure how often I would check on here for replies...
1996 Mustang Cobra Convertible Laser Red. $$13,300
Car is in excellent condition, over all a 9 of 10. Cobra is almost all stock, Original paint, only non stock items are flow master mufflers (still have original) K and N air filter and front cobra badge (still have original). Car has 20,703...
Hello, Is there already a thread that has detailed head specifications? If so please point me that direction if now can someone please help me out? I have a 96 4.6 mustang GT motor and I am going to do 2 different things, the first is rebuild the stock heads (I believe they are 2v) so i would...
I had a lot of confusing results when I searched for "mustang orifice tube replacement". Some posts said you had to replace entire a/c line (liquid line). Some posts said you could just replace the orifice tube. I finally figured it out and most of you may already know how to do this. I'm going...
hey guys, have an SCT tuner my stepdad bought for the 2006 Roush Stage 1 I had sold to him. The tuner was bought through American Muscle and the tunes for life through Bama Tunes. Since it's a different car they wont do free tunes and the tuner wont work on my car. guess it's VIN locked on the...
Hey guys, first off my step dad bought an SCT tuner for our 06 roush stage 1, I now just have an 06 GT, can i use this tuner right away or do I need to program it? and if i need new tunes who should i go to? thanks guys.
hi ive been doing a focus v8 swap for the last year its just about finished except i cant get it to start its a 1999 4.6 svt cobra v8 its never been ran ive got the engine the computer everything is brand new the pump primes it cranks but the injectors dont pulse itll run for 2 seconds if you...
Manley Pistons, pins, and round wire locks for sale. Pistons are Manley part # 494200. Manley has used these in engines up to 750 hp with no issues. Pistons are 4032 forging, 375 grams. Standard bore size, 3.552", fits standard 4.6 & 5.4 rod & stroke. Pins are 0.120” wall chromoly, 89 grams. The...
Manley Pistons, pins, and round wire locks for sale. Pistons are Manley part # 494200. Manley has used these in engines up to 750 hp with no issues. Pistons are 4032 forging, 375 grams. Standard bore size, 3.552", fits standard 4.6 & 5.4 rod & stroke. Pins are 0.120” wall chromoly, 89 grams. The...
Manley Pistons, pins, and round wire locks for sale. Pistons are Manley part # 494200. Manley has used these in engines up to 750 hp with no issues. Pistons are 4032 forging, 375 grams. Standard bore size, 3.552", fits standard 4.6 & 5.4 rod & stroke. Pins are 0.120” wall chromoly, 89 grams. The...