Search results

Well I got my Procharger put on my 98 Cobra and its @ Dynospeed racing in Memphis getting tuned. I put in a new Aviator fuel pump and new 42lb injectors and new 90mm Lightning maf. When I first took it up there it was having major idling issues....it was backfiring through the exhaust and...

Ok, I though I finally got most of the hard stuff out of the way but I'm almost all the way to the end and one of the last things I have to do is install the procharger intake pipe w/ the iat and pvc and surge valve connections. First problem is, there is an a/c service like port proturding up...

My new Procharger came in today after a month and a half of waiting. Apparently ati doesnt' get in any big hurry to fill its orders....don't know if any of you had the same waiting problems. Also I'm not sure what psi kit I got cause it doesnt' say. I ordered 6psi but the pulley is a 3.60, so...

Ok I ordered an untuned Procharger kit (8psi) last week and I want everything I need for when it comes in. I got 42lb ford injectors and a 04 aviator pump. I have the JLT CAI now and don't know if theres anyway to reuse it on the intake side of the charger so if not, it'll be for sale. My...

Well I locked myself outta my car. I don't have a slimjim and the local locksmith wants 55 dollars just to come a mile down the street and unlock my car. Any tricks or anything I can do to gain entry? If I get the hood up can I trigger the electric locks from the engine bay? Anybody got in...

Whats the maximum amount of rwhp the stock mass air meter and electronics will support without upgrading the housing and sensor? I've heard alot of stories about what level they peg out at.

Well this is the first time ever my car has done this. Today, while driving it, when I shifted from gear to gear whatever rpm I shifted at the car would stay at with the clutch pushed in till I found the next gear, so when I shifted @ 3k rpm from first, the revs didn't drop but stayed @ 3k...

Well i didn't really see any good info on this so I started up my own post. Here are some really great places I've dealt with....Modular Depot, RPM Outlet, Gene Evans Ford. Really haven't had any bad experiences to report yet.....so lets hear what everybody else thinks.

Well, I'm going to order my supercharger tommorrow, and I'm pretty mechanically inclined. I'm pretty sure I can bolt everything up, and once I do that I'm taking it to a local shop to get it dyno-tuned and any bugs worked out that it may have. I do have 1 question I have always wondered...

i replaced clutch master cylinder and slave cylinder and bleed the system a hundred times and still have no clutch pedal, anyone have any suggestions??

I had an air/fuel meter and was going to hook it up, but I don't know which wire off the oxygen sensor. Its not wideband or anything like that, just your regular cheapo with one lead that hooks to a single wire on your sensor. If somebody could tell me the color or where to look for it besides...

I want to lower my car a tad but I don't want to affect my 60ft times or my launches....is this possible or do I just need to forget it and leave it at stock height?

Ok, so I am going to go online and find a good place to find 42lb. injectors to fit my car. I found rpmoutlet which sells them at a fair price about $35 a piece. Well then I found some at Ford Racing Parts Dealers that were "Flowed" and "Matched Set" with extremely higher prices for what seems...

This video is pretty awesome, it was my first time editing a video. Unforutnately I couldn't find anyone to host it for me (Go Figure) :shrug: Well I put it on Megaupload and if you have the patience....its totally worth it. Good Luck with the long download. www.megaupload.com/?d=32z31k03

I put together a pretty good video imo and I was going to put it on like mega upload or putfile but it would take a minute to download. File size is 46Mb. Can anybody host this for me?

I went out and ran a 98 corvette last night. It was an automatic, does anybody know what these are running? The first time he got me a car length and the 2nd and 3rd time I couldn't get no traction. The fourth time I got decent enough traction and burned him with the hole shot and had a half...

Well I finally installed my meziere electric pump on my 98 cobra last night. I ran into several key problems. First, you really have to have ballend hex key wrenches or go buy some or there is no way you will tighten the pump up. A second thing that plagued me for over 15 minutes is that the...

I was wanting to go with some nice racing wheels for my car but I don't really want to go full skinnies up front since its a daily driver. I also don't want to use spacers. I've seen duane v's setup and its nice but it looks like hes running spacers. Would it be possible to run like a 5 or 6...

I'm not an engine builder but I know alittle bit about engines. So me and my friends started this debate I want to solve. If you take out the crank and rods from the bottom, can new pistons be installed from the bottom of the block without touching the topend? or is this at all realisticly...

Ok, this is the last question for the day i promise. I was reading on the fr500 intake and it likes to make peak power very high in the rpm band like over 7 grand. So if you put the manifold on with the frpp cam kit and change the redline on the tuner, what is the safest the stock bottom end...

Ok so my car started making this grinding going into fifth gear, it was occasional now its happens alot, but i have found a way not to make it happen, i don't know if this sounds crazy or not but when i go from 4th to 5th regularly like pushing up and over it will grind even with the clutch...

I have heard that since the sender is in the crossover pipe, It doesn't give a very accurate measurement of actually temp in the engine. If I got an aftermarket gauge is there anywhere on the motor where i could put a mechanical sender in?

So last night around midnight by buddies come over with a camera and then all wanted to film so crazy stuff. So we head out and when we get into town, this old chevy truck wants to race me for money. He swore up and down I was using nitrous cause at like around 3 or 4k the cobra really wakes...

Well I finally got my fiance to take pics with my car. I don't think I've ever put any pics of my car on here before so enjoy!

Ok so I finally have some money saved up again after all the money I've already spent. I have a 98 cobra with all the goodies except major engine work. So its stock heads, cams, intake manifold, and bottom end. I was wanting to take the next step and go with a kennebelle twinscrew blower. I...