Recent content by SVTRocket

Aren't B8 struts and shocks recommended for lowering springs?

Had a squeaking from the front of the engine and fixed it with the help of the forum, thanks. This is quick supplement to help others: Symptom: 1) squeak from front of engine, especially when cold 2) may go away on idle, but comes on when driving around 2000+ rpm Troubleshoot: 1) belt...

I'm considering getting larger injectors as I wonder if the stockers are about maxed out with my set-up (mods in sig). Would there be an advantage to switching? 60's are almost used exclusively, but when I read this from rpmoutlet, it seems 42 lbs would be more than enough (see below). What...

I have Steeda sport springs on my '03 convertible with 18x10 Saleen reps. Do you think I'll have enough tire clearance from the stock irs bolt with nitto 305/35/18 drag radials? Thanks

I expect about a 2-10 hp/tq gain. Magnaflow is claiming 22/16. What are your thoughts? (search inop)

I had the car dyno tuned today with Stiegemeier's Stage 5 port combo. It really woke the Cobra up! Mods when I brought it in were a JLT RAI filter and Borla catback. The end result is with the Stage 5 combo (stock throttle body), 2.76 pulley, Sct tune (stock cats). What do you guys think...

I've searched and read about porting and trying to gather any additional information from ported eaton owners, as I'm wanting to port/pulley combo my '03. I'm aware a certain percentage believe money is more wisely spent on a twin screw, but I'm not wanting to boost my motor into the upper...

Although the low H&R Sports look great, they're too low b/c I don't want scraping. I'm thinking I want the least amount of drop in lowering springs to avoid scraping. People with them. What do you think?

What do you think of the COBRA bumper inserts? Do you like them or leave it stock?

I noticed my boost gauge isn't working. Does anyone have a suggestion on what/how to check? Ford recently had the dash off and replaced my A/C plenum. I'm guessing something didn't get hooked up right. Is there a fuse or boost by-pass to check before I take it back in?

I like the Borla exhaust, but curious what Borla owners think before I drop the cash. Those with the systems , please let us know what you think living with the system.

Modular SLP Catback I don't see much on SLP Catbacks on the forum. I like how you can easily swap out the LM and LM II muffs,i.e. modular. The exhaust tips are really nice and from the sound clips I've found, sounds healthy! C'mon SLP people and let us know how you like 'em...

A lot report the H&R Sport Springs are a little too low and go for the Race springs (contrary to h&r website drop claims). Some feel the race springs are too stiff and not available for convertibles. I haven't found anything on the OE Sport Springs. Anyone running these that are supposed to...

Had an RAI on my '01 and it was straight forward install. The '03 is different, so please give me your tips about the vacuum hook-ups (by throttle body) temp sensor swap, grommet sealer, etc or anything else that would help. I put the stock one back on till I could give it more thought...

Is there any information about how much drop per inch you get with percentage of cut coil; i.e. does half a coil a coil equal half an inch and so forth? I'm looking for only about .5 - .75 inch drop