SOLD
2003 Black Convertible
20,900 miles
Build #2899 of 5082
Build Date 3/18/03
One of only 68 cars built with black/black/tan color combination
JLT Intake
JLT PCV Pre-Filter
MM Aluminum Steering Rack Bushings
Stock Catback with Flowmaster Mufflers
Billetflow IRS Brace
17 x 10.5"...
I ran into this guy on the way home last night. Looked to be an LS1 because it had the single exhaust. Car sounded great with the centrifugal blower. I asked him if he wanted to find some open roads and he said "It's Procharged man". :shrug:
I was confident I didn't have a chance but my...
I know many people have been interested in regards to what an aftermarket tune will do performance-wise to a car with the stock boost setup. Having just purchased an XCal2 from Amazon, I decided to do a little experiment while I had the car on the dyno. The first two pulls I had the ATS tune...
Up for sale are two (2) Ford original 17 x 9 chrome Cobra wheels with stock Goodyear Eagle F1 275/40/ZR17 tires. The wheels and tires have 17,500 miles on them. The wheels are virtually perfect with only a small curb rash mark on the outer lip of one wheel. I wax the wheels every 1k miles for...
I have a Billetflow 2.93 upper w/ 4 idlers sitting in my garage waiting to go on. I'm adding a 3" MAC CB, some Nitto DR's, and an IRS brace before the pulley.
I have two options for tuning:
1. Trailer the car 2.5 hours to Modular Powerhouse for a dyno tune.
2. I have a dyno 5 minutes...
Would try the Taste of Home Section but not many people post in there.
Just moved to Birmingham and was looking to meet up with some Cobra/Mustang guys. I'm always interested in cruise ins or just meeting up to talk cars.
Reply to this thread or shoot me a PM if anyone knows of any...
Tried searching for this exact setup with no luck. Has anyone ever run this setup? I've seen a few guys run a catted Prochamber with the LM II but not an O/R. I'm debating between MAC, Flowmaster, and SLP LM II for my catback and am leaning toward the LM II because of the quality of...
Tried a search, turned up nothing. Is the tint on the rear view mirror actual window tint or is it tinted glass? Reason I ask is the corners of mine show no tint and are regular mirror looking....seems like the tint is wearing or fading off. Also, with 20% window tint on the rear window, it...
After roughly seven hours, I got the first two coats of wax done on my Cobra. Here's the steps I took and a few pictures of the results. As this was the first time I waxed her, I went all out with the Z-KIT1 from Zaino. I plan to do another 2 coats of wax or so - one with Z5 and a buffer to...
For whatever reason, my car still gives me the P0156 code referring to the driver's side O2 sensor even though I have MIL's (w/ O/R Prochamber installed). A friend of mine has an XCal2 and I was wondering if someone would instruct me how to turn off the O2 sensors using the tuner. Any help is...
My buddy just got a S2000 with a Vortech Supercharger kit putting his car around 350hp/215tq. I'm running a 2003 Cobra with JLT CAI, MAC H pipe, and Flowmaster CB.
What does everyone think? Does his significant weight difference balance out my hp/tq? Anyone have first hand experience? I...
Tried this in the Exhaust Forum with little results. Figured I'd find more people in here that can help.
Bought a MAC H pipe on SVTP which I was told was for the 03-04 Cobras. Turns out the piece that bolts up to the passenger side exhaust manifold has a slip type flange fitting on it (same...
Bought a MAC H pipe on here which I was told was for the 03-04 Cobras. Turns out the piece that bolts up to the passenger side exhaust manifold has a slip type flange fitting on it (same as driver's side) rather than a fixed flange. Anyone know what Mustang this fits? Any idea of the MAC part...
Is it worth spending another $110 for the O/R Prochamber? MAC O/R H runs $169 and Prochamber runs $279. I'm assuming most guys will say yes because I see more guys running Prochambers, but I'd like to see what everyone thinks. I'm running weld in Flows right now but I plan to upgrade to a...