Looking to get a single blade standard kenne bell inlet or if some one has a behemoth or mph or what ever else was made for the kb 2.8h.
please let me know what you have to get rid of.
Thanks, Dan
Last year at the end of the season I had a o2 go so I replaced the pair, this year it was a crap idle that was lean so I logged it and the driver side o2 was lazy again, I swapped in a old one and it improved. So I took the good one from bank 1 and put it in bank 2 to see if it was a wiring...
So periodically my car would stall out after a clutch application slowing down to a stoplight or even holding down the clutch too long between shifts. Became real annoying and difficult to pin down to the problem.
After doing all of the tps voltage checks and all the other normal routines...
Went to the track and now I find that the car is running lean at idle, always over 15 and peggs the gauge and chugs. I pulled the plugs and none of them are damaged but have a light white haze on every hole.
I tried changing some parts and looking for vacuum leaks but havent come up with...
Last night at the track I had the rpm limiter set to 6700 but when I was running up the rpms in third waiting to shift the car redlined at 6000. When I went back to the pits I hooked up the laptop and noticed everytime I clicked the. Read button with the car idling it was spuratic. It ranged...
Can anyone confirm what vavle springs are supposed to be in the shelby head?
My friend opened up his valve cover to find out what was supposed to be loaded gt heads are the shelby heads with 10 mm lift cams and not the color coded springs.
Just trying to figure out if the springs will be...
Just curious to know if the moates chip burner would be able to program the SCT 4 bank chip? Not sure if something special is happening in the sct 7500 burner.
'BURN2 Chip Programmer' [BURN2] - $85.00 : Moates.Net
We just changed the emission testing here from the rollers to emission readiness only testing. Does anyone have experience with passing the test with mil"s installed?
I know it wont pass the visual but most shops are too lazy to check so I'm nit overly concerned about that portion.
Just wondering if anyone could tell me where to buy a 5g jug of race fuel near the Zephyr Hills. My dad is there for the snowy season and since no one ships it I am hoping he can bring some home. He is around Tampa and the bay area, St Pete's, Clearwater and Orlando. Let me know if you know of...
Looking to get into the 10's with my car this year and I need a few more mph, as I am getting 119 now on heavy chinese cast street wheels and beat up 555r's
I still have everything on the car plus added weight with the killer chiller and such, stock 3.55 gears, Changing tranny over to a...
These are new Gt500 rods for the 5.4 based engine, Looking to get $450 plus shipping for these.
Pics in the link
http://www.svtperformance.com/forums/engine-drivetrain-282/897497-2013-gt500-rods.html