Recent content by Shadowgray03

*** SOLD *** Used to be a frequent poster here but I have been so busy with work and else where that I just dont ever drive my car anymore so I figure I may as well see if anyone else may be interested in it. Here is run down on the car. $29K OBO 10700 miles, One owner, mint condition...

Hey gang, I just got done putting together an ET and modification database for my fellow terminator owners. Its not totally bug free or pretty but functional. Anyway, I was wondering if the lightning crowd would have any interest in a similar setup? In truth I would just add a new category to...

Took me longer than I had hoped but I finally have a site up which should allow people enter data about their cars. Using the site should be pretty straight forward. Registration is required to reduce junk posting etc but no information will be sold or shared. Posting combos is a free no...

Im looking at a set of 18" wheels, 9" up front 10" in the rear and I am curious as to what size tires every is running with similar wheel sizes. Stock tires have like a 25.7 overall diameter and I was thinking a 295/35 with an OD of 26.1 on the rear and a 275/35 with an OD of 25.7 for the...

As some of you may be aware I suffered motor damage in the spring of 04 and car has been down ever since. I was on the bleeding edge with my F150 hitting many stumbling blocks and also I beleive I was one of the 1st 03 cobra's to have the KB2.2 and I ultimatly payed the price for being on...

Just as the title says, im wondering if anyone has any experience with grundy insurance? My car is always garaged, not driven in the rain etc and due to the amount of money in mods I have into it I am afraid I will get screwed by my regurlar insurance provider should something happen and they...

This goes out to everyone iwth aftermarket cams. I got a set of crower stage 2's and a brand new set of ford heads. The exhaust lobe seems to hit the cam cage, has anyone else run into this issue??

Well, im in need of a new pair of heads, anyone know who has takoffs or anything, I really only need the castings.

Im looking for feedback on lower pulleys, not looking for a quick change kit, just a fixed size lower, any recomendations?

Anyone out there running a KB and a lower pulley? If so who's lower are you using and have you noticed any boost drop off with it?

Just a quick question regarding spring isolators, specifically regarding MM poly ones and stock. How much difference in ride height is there between the stock rubber and MM poly spring isolators?

I just got a set of bassani mids to put on the stroker and I was noticing where the primary attaches to head is real rough/edgy, its not a nice smooth transition. Has anyone done any smoothing/porting in this area to cut back on exhaust turbulence?

Ok, after some delays im finally getting the IRS back together and am having some issues on the passenger side front LCA bolt. The pockets were a bit tight and I had to pry them apart a bit to get the bushings. Once done The rear bolts went right in and the front hole on the front bushing lined...

Just an FYI, I pulled out my halfshafts and ruined 2x autozone pullers in the process. These shouldnt come out that hard and what tunred out to be the problem is that the splines on both halfshaft stubs and the hubs themselves were twisted. The splined still ran straight BUT the top end was kind...

Ok, so Ive worked my way down to the LCA's (did IRS subframe and UCA bushings) and theese damn LCA bushings are in there good. Any tips on getting the original bushings out? And the sleev comes out as well correct (using Nicks delrin bushings).