Recent content by 94CobraPace

Ready to pull the trigger on Shelby GT500. Do I get a 21 or order a 22? If ordering a 22 now, when would the car get delivered? Any ideas? I have a 21 that is in transit I could get optioned the way I want, will have cooled seats (Texas heat ) with color in top 3 of my choices. Living in...

If it's really tight, get a strap on the headers and pull them out a little, just don't pull them much. Should be able to get 1/2" on each side. I've done this before for that little extra clearance.

Correct slave cylinder was used, verified with McLeod. I have ordered the Ram pedal height adjuster, that's the info I was needing.

I had a shop install RXT on 2010 GT500 and the engagement is very high, right at the top of pedal. We called McLeod and they ask about install height, the shop did not measure (they have installed many and no issues the reason why no measurements taken). The shop will be removing the trans and...

For stock feel and drivablilty, go with the 13/14.

Keep us informed about the RST, I"m about to need a clutch and that's the one I'm thinking about the RST. Just FYI, RST & RXT are different clutches.

What are your goals for the car? Shops are a personal preference and everyone has their own preference and opinion. I like Chris Car Doc in Humble. I recommend going to the shop before you need them and talking to them before you take the car there. See the shop, projects and talk to them...

Or don't connect the wires. You want a CDC light bar, hands down the best. The cheap ones are cheap.

Nice, Waiting to mount tires and install on car. I got the 10.5" rears

I went from a Barton to a Gen 2 on my 10.. It was worth the switch to me and would do it again.

Installed VMP TVS with 2.4" pulley, JLT 123 M CAI, & ID 1000 injectors on the 2010 Shelby. Car already had VMP 67 MM TB, American racing headers, hi flow cats X pipe, 3" exhaust, dual fan inter-cooler. Car made 640 RWHP & 650 RWTQ on a DynoJet dyno. Wasn't the greatest day, 93 degrees, 40%...

I have a friend that is looking at a 2010 White Shelby GT500 with silver stripes at a dealer in Houston. Car has VMP Gen 1 TVS supercharger (silver supercharger), JLT CAI, Borla exhaust, Hurst shifter, 13\14 grills, upgrade inter cooler, shaker 1000 (no Nav) and 42K miles on it. It's lowered...

I picked up a VMP Gen 2 for the 2010. Mods are ARH 1 3/4" long tubes with catted X pipe and 3" Magnaflow competition cat back mufflers (exhaust was on the car when I bought it). Tuner suggested I go with off road pipe with the addition of the VMP supercharger upgrade. The car sounds great...

Sold.

For sale JLT Ram air intake for a 1999 or 2001 Cobra. Includes filter, MAF meter adapter, elabow coupler, clamps, heat shield and PVC. Good shape. $125.00 shipped to lower 48 states.