Search results

Ready to pull the trigger on Shelby GT500. Do I get a 21 or order a 22? If ordering a 22 now, when would the car get delivered? Any ideas? I have a 21 that is in transit I could get optioned the way I want, will have cooled seats (Texas heat ) with color in top 3 of my choices. Living in...

If it's really tight, get a strap on the headers and pull them out a little, just don't pull them much. Should be able to get 1/2" on each side. I've done this before for that little extra clearance.

Correct slave cylinder was used, verified with McLeod. I have ordered the Ram pedal height adjuster, that's the info I was needing.

I had a shop install RXT on 2010 GT500 and the engagement is very high, right at the top of pedal. We called McLeod and they ask about install height, the shop did not measure (they have installed many and no issues the reason why no measurements taken). The shop will be removing the trans and...

For stock feel and drivablilty, go with the 13/14.

Keep us informed about the RST, I"m about to need a clutch and that's the one I'm thinking about the RST. Just FYI, RST & RXT are different clutches.

What are your goals for the car? Shops are a personal preference and everyone has their own preference and opinion. I like Chris Car Doc in Humble. I recommend going to the shop before you need them and talking to them before you take the car there. See the shop, projects and talk to them...

Or don't connect the wires. You want a CDC light bar, hands down the best. The cheap ones are cheap.

Nice, Waiting to mount tires and install on car. I got the 10.5" rears

I went from a Barton to a Gen 2 on my 10.. It was worth the switch to me and would do it again.

Installed VMP TVS with 2.4" pulley, JLT 123 M CAI, & ID 1000 injectors on the 2010 Shelby. Car already had VMP 67 MM TB, American racing headers, hi flow cats X pipe, 3" exhaust, dual fan inter-cooler. Car made 640 RWHP & 650 RWTQ on a DynoJet dyno. Wasn't the greatest day, 93 degrees, 40%...

I have a friend that is looking at a 2010 White Shelby GT500 with silver stripes at a dealer in Houston. Car has VMP Gen 1 TVS supercharger (silver supercharger), JLT CAI, Borla exhaust, Hurst shifter, 13\14 grills, upgrade inter cooler, shaker 1000 (no Nav) and 42K miles on it. It's lowered...

I picked up a VMP Gen 2 for the 2010. Mods are ARH 1 3/4" long tubes with catted X pipe and 3" Magnaflow competition cat back mufflers (exhaust was on the car when I bought it). Tuner suggested I go with off road pipe with the addition of the VMP supercharger upgrade. The car sounds great...

Sold.

For sale JLT Ram air intake for a 1999 or 2001 Cobra. Includes filter, MAF meter adapter, elabow coupler, clamps, heat shield and PVC. Good shape. $125.00 shipped to lower 48 states.

Who here does Crossfit? I've been doing Crossfit for 1.5 years, am a L1 trainer and part owner of a Crossfit box, Crossfit Torch. I've lost 35 lbs and am in the best shape ever. My doctor told me I addd 10 years to my life, lowered my cholorstol from 222 to 146, BP came way down to 104/65...

I just got a 2010 Kona blue with silver stripes to go along with the wifes 2007 Vista blue with Tungston stripes. My new 2010 has American racing long tubes, high flow cats, Magnaflow mufflers, JLT stock replacemt CAI and 2.65 pulley. Car had a Lethal tune that would not pass Texas...

Take off springs front and rear from a 2001 Cobra with the IRS. Removed at 22k miles. Local pickup in Houston, TX, NE. 50.00

Sold

Clutch has slipped once, so started researching clutches. Called Tommy Vauhn in Houston and they guy I know there said they have a Ram twin disk 9 1/2" clutch for the 500's. Said it had a rating of 800 fts torque. Said pedal effort was less than stock. And at less than $1000? Other choice...

FRPP extender that has been modified for the 94\95 Cobra's. The extender alows the user to fine tune the air fuel ratio and raise the RPM limit to a higher rpm. The extender also removes the tip in timing retard and 93 mph pulling of timing. Included is the harness and box with instructions...

Anyone have JLT RAI on their Cobra? I purchased one and there was incorrect & missing parts in the kit, JLT corrected the issue BTW, but still wondering if I got the correct 01 parts. When installed, the filter hit the radiator support and the shield will not fit, not even close. Had to get a...

Sold

I have a set of Ford shelby GT500 rims. 18" X 9.5" wide. These are original Ford rims taken off a 07 Shelby GT500 with 3300 miles. Front tires are like new. Rears are worn, almost to the wear bars, but not quite. One of the rear rims has a small nick on the gray inserts, not very noticable...

Hey, I tried on a set of 07 Shelby GT 500 rims and tires on my 94 Cobra. The rims are 18" X 9.5" on all 4. The front tires are 255-45-18 and the rears are 285-40-18. The tires are on the tall side, especially the fronts. The fronts needed 1/2" spacer (used some washers to get the spaceing...