DIY'ers: what motor oil are you using?

AnthonyNoz

Member
Established Member
Joined
Oct 5, 2011
Messages
781
Location
Queens
I was thinking of using amsoil synthetic,any better choices?
Oil filter i was going to stick with motorcraft. Thanks in advance
 

Mika

Active Member
Established Member
Joined
Jun 26, 2005
Messages
1,522
Location
Bedford, Tx
I use Amsoil Signature Series 10W-30. Search for Unleashed Beast and Jimmysidecarr. Those two guys(both have their preferences) give good advice.



Mika
 

ViciousJay

Well-Known Member
Established Member
Joined
Nov 22, 2004
Messages
20,266
Location
Chi Burbs
just used Mobil 1 and ill NEVER USE IT AGAIN! back to the reg old motorcraft 5w20. Im not racing the car much so using a true synthetic is a purely a waste
 

Bluebolt

Hold my beer n watch this
Established Member
Joined
Oct 25, 2006
Messages
847
Location
Granbury, Texas
Mobile 1 here. Used it in my L as well. My father in-law had bad experiences with royal purple that turned me away from it. Might try the amsoil one day (used to run it in my dirtbikes)
 

Adam03GT

New Member
Established Member
Joined
Apr 16, 2007
Messages
293
Location
Oklahoma
Surprised to see how many people are running the 10w30 version of Amsoil. Any reason you are using this over the 0w30?
 

blackbeast12

Dr. Frankenstang
Established Member
Joined
Apr 30, 2012
Messages
3,929
Location
Delaware
Amsoil signature series synthetic motor oil is the best hands down!!!! Severe condition change interval=15,000 miles , non severe change interval =25,000 miles... its all in the Stats:

TYPICAL TECHNICAL PROPERTIES
Signature Series 5W-20 Synthetic Motor Oil (ALM)
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
8.8
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
50.5
Viscosity Index (ASTM D-2270)
153
CCS Viscosity, cP @ (°C) (ASTM D-5293
4054 (-30)
Flash Point °C (°F) (ASTM D-92)
228 (442)
Fire Point °C (°F) (ASTM D-92)
246 (475)
Pour Point °C (°F) (ASTM D-97)
-51 (-60)
NOACK Volatility, % weight loss (g/100g) (ASTM D-5800)
5.70%
High Temperature/High Shear Viscosity
@ 150°C, 1.0 X 106 s.-1), cP (ASTM D-5481)
2.8
Four-Ball Wear Test @ 40 kgf, 75ºC,
1200 rpm, 1 hr, scar diameter, mm (ASTM D-4172)
0.35
Total Base Number (ASTM D-2896)
12.6
 

corruptor

New Member
Established Member
Joined
May 5, 2011
Messages
472
Location
SF Bay Area
Redline fanboy here. Running 5w-20 for now but will likely switch to 5w-30 at next change. Also using OEM filter.
 

oem

Custom User Title
Established Member
Joined
Aug 14, 2010
Messages
679
Location
St.Louis, MO
Royal Purple 5w20 and a Wix filter, same combo i've always used even before the Cobra.
 

Users who are viewing this thread



Top