I've had breathers for ages. They always worked well, but they did tend to leave a bit of oily residue on the valve covers.
So, I finally went with a catch can setup.
Keep in mind that I used zip ties to mount it to the blower bracket as an interim. I have an idea for a more permanent solution, but as is, its pretty secure, and will just move with the engine.
Basically, this amounts to:
Two EVM-183 pcv valves ($14 together)
6 feet of heater hose ($5)
Moroso catch can and hose barbs ($110)
Prior:
current:
So, I finally went with a catch can setup.
Keep in mind that I used zip ties to mount it to the blower bracket as an interim. I have an idea for a more permanent solution, but as is, its pretty secure, and will just move with the engine.
Basically, this amounts to:
Two EVM-183 pcv valves ($14 together)
6 feet of heater hose ($5)
Moroso catch can and hose barbs ($110)
Prior:
current: