Anthony,
One of our SVTP members sells this kit for 50 bucks for the ducts alone. I got the 60 dollar kit that includes the hose, zip ties, nuts, bolts and washers.
Took me and my son about an hour and half, this includes photos shoot time and instruction time with my son. Here is Anthony's info.
--------
Dale,
How'd the install go? Did you get it all put together and cinched down? How was the fitment? Let me know if you had any troubles or have any complaints or concerns. I appreciate your business and any feedback you might have to help me market a better product.
Thank you,
Anthony Dail
Midcontinent Mustangs
(785)658-5921
__________________
Midcontinent Mustangs
'Brake Duct Backing Plates'
'3" ducting kit also available'
Everything you need for cooler brakes
Free shipping to the first 10 customers!
-Click the link for pics of the backing plates-
http://pg.photos.yahoo.com/ph/kjenk...m?.dir=/6799re2
Here is the parts inventory of the 60 dollar kit:
2 duct plates
two 5 ft hose
4 bolts, washers, lock washers and nuts:
Ease of install: Used 7/16 and 11mm wrenches to tighten the bolts and washers. I did not have to remove the rotors (use 15mm socket) since I had already drilled the brake shields previously and had a high temp hose installed. I had to clip a small section of the high temp hose to slide it over the duct extensions then I used a 4 in clamp to hold everything in place.
So easy my son did most of the work:
This is a quality piece especially for the price, gents you can't go wrong. The only problem was the passenger side hole was about 1/8inch too short. I just loosened up the lower attaching point and used that play to start the top bolt. It tightened up nicely. I could have easily expanded the hole with a drill but the way I did it worked out just fine. Great price easy install! Thanks to Anthony for saving me about 100 bucks from what a bunch of other guys charged.
One of our SVTP members sells this kit for 50 bucks for the ducts alone. I got the 60 dollar kit that includes the hose, zip ties, nuts, bolts and washers.
Took me and my son about an hour and half, this includes photos shoot time and instruction time with my son. Here is Anthony's info.
--------
Dale,
How'd the install go? Did you get it all put together and cinched down? How was the fitment? Let me know if you had any troubles or have any complaints or concerns. I appreciate your business and any feedback you might have to help me market a better product.
Thank you,
Anthony Dail
Midcontinent Mustangs
(785)658-5921
__________________
Midcontinent Mustangs
'Brake Duct Backing Plates'
'3" ducting kit also available'
Everything you need for cooler brakes
Free shipping to the first 10 customers!
-Click the link for pics of the backing plates-
http://pg.photos.yahoo.com/ph/kjenk...m?.dir=/6799re2
Here is the parts inventory of the 60 dollar kit:
2 duct plates
two 5 ft hose
4 bolts, washers, lock washers and nuts:
Ease of install: Used 7/16 and 11mm wrenches to tighten the bolts and washers. I did not have to remove the rotors (use 15mm socket) since I had already drilled the brake shields previously and had a high temp hose installed. I had to clip a small section of the high temp hose to slide it over the duct extensions then I used a 4 in clamp to hold everything in place.
So easy my son did most of the work:
This is a quality piece especially for the price, gents you can't go wrong. The only problem was the passenger side hole was about 1/8inch too short. I just loosened up the lower attaching point and used that play to start the top bolt. It tightened up nicely. I could have easily expanded the hole with a drill but the way I did it worked out just fine. Great price easy install! Thanks to Anthony for saving me about 100 bucks from what a bunch of other guys charged.
Last edited by a moderator: