Has anyone ever fixed or replaced the wiring running from the OEM fuel pump wiring to the OEM fuel pump hat?
The best way to do this is to replace the bad wiring with new wiring. But one end of the wire is plugged into the fuel pump connector and the other end runs to a connector that is...
I have a 2001 Cobra with some issues. Car has the standard 4.6 4v and tr3650 with no performance mods. I crushed the pigtail connector that connects the transmission wiring harness into the main engine harness while trying to reinstall the transmission. I have no reverse lights, speedo, odo...
I am going to be installing gauges in my car in the next few weeks, and am trying to figure out the best way to wire the AFR and Boost gauge in.
A friend of mine was showing me a fuse block and bus bar he used in his car (non-Ford) and I was wondering if anyone here has a suggestion for the best...
i am pulling my hair out at this point. I worked on this for a few days at the end of last season and had to put the car into storage unrepaired. I would like to start completely fresh and rechase everything down and am willing to pay someone to walk me through chasing it down and helping me...
I’m trying to swap my ambers for regular tinted tail lights, I have the gt harness, body harness and relay. What 2 wires on the cobras body harness from the 5 point connector do I have to splice together to get the 4 point for the GT body harness to ensure the lights(brake, blinker, hazards) all...
96 Cobra I did a MK VIII swap on. I have everything put back together and I try to start it but it won’t fire up. It will turn over but not fire up. It’s getting spark. I tested the injectors and both of the wires on each injector lit up with my test light. Is that a ground issue? It also had...
I bought this car a few months ago. Turbo car built. Who ever did the wiring obviously messed something up. I had a no start issue where the theft light was flashing. Initially I thought it was a pats issue or a bad key. Had a locksmith come out and he confirmed that was not the issue. Well last...
Morning SVT,
I have a 99 Cobra I have worked out all the kinks since the rebuild, I have about 600 miles on the motor now. I have been driving it back an fourth to work. However, yesterday on my way home I was cruising highway speeds and my motor seem quiet, I lost all power. I coasted to a...
i have a 2012 gt500 just installed a c&r heat exchanger the instructions told me to use a add a fuse wire I tapped into 47 and 48 fuse and they threw codes p0135 p0155 p0403 p0443 I re wired the heat exchanger the correct way but the codes wont go away and its making the car run real bad its...
I bought a 98 Terminator swapped Cobra a little while back and I'm making it my own. While doing so, I'm trying to "clean up"/fix all the wiring issues it has. I was hoping to find someone that has done this swap that could help. I'm an aircraft electrician so it doesn't scare me to get into it...
I need to make sure my wiring is correct. Went from typical maf on a 00GT to a slot style maf. So i need to make sure the IAT is in the right spot as well as power and ground. Does anybody have a diagram i can go off of that they trust. I looked one up on google but I'm not sure if it is correct
Hey guys, I'm looking for the pinouts for the engine harness for my 99 cobra. I am finding the 96-98 cobras and 03/04 cobra 42 pin connectors but nothing for 99/01. Please help.
Hey guys, new here but I've been trying to read and search for a couple weeks now to no avail.
To the issue, I've got a 99 cobra vert and I am doing a terminator swap on it. I have everything, all harnesses, engine, tranny, driveshaft, gauges, fuel tank, the works. Now, my question is, do I...
im just looking for a diagram for my 04 cobra looking for mostly the ignition wire and for a few others to work out some bugs if anyone has any please let me know thanks!!
Tail Light Stock wiring harnesses. Installed sequential awhile back and thought i could help somebody out that needed some stock harnesses. make an offer will ship for free
I have a 2003 cobra. Running 475rwhp. A couple months ago because the battery died and would die immediately after the car was jumped and I applied the gas or turned on the lights. Changed the battery and still wouldn't crank. So I replaced the alternator myself to find out the one in it was...
I have just about every electrical component and wire harness there is for an 02' GT as well as the TPS Harness off of an 00' GT. Prices are all easy, make offers and tell me what ya need. Call/Text, 918-859-6565.
My 2003 Termi's windows will not roll up or down. When you open the driver's side door the dome light doesn't come on but it does when you open the passenger door so I figured it was the door switch on the driver's side. I replaced the door switch and tested all the fuses in the fuse box under...
I have a 68 mustang coupe with a 289. Ive been having tons of problems lately but sorted alot of them out. My one problem now is starting it. It use to start perfectly fine but one day just crapped out. I than figured it might be starter solenoid since it was the original one. I replaced the...
Got a 99 cobra. New alternator and good battery. The reference wire (green with red stripe) in the voltage regulator pigtail has around 10 volts when unplugged. as soon as it is plugged in it drops to less than 1 volt which isnt enough to turn on the regulator. just wondering if anybody could...
I have some 2003/04 Cobra parts I am looking to sell. I ended up buying a complete engine so I no longer need these. I have listed them below with prices, all prices below are plus PP fees and shipping if not specified. All prices are OBO and I can send pics to your e-mail upon...
I have some 2003/04 Cobra parts I am looking to sell. I ended up buying a complete engine so I no longer need these. I have listed them below with prices, all prices below are plus PP fees and shipping if not specified. All prices are OBO and I can send pics to your e-mail upon...
I have some 2003/04 Cobra parts I am looking to sell. I ended up buying a complete engine so I no longer need these. I have almost a complete supercharger kit along with heads and other parts. I have listed them below with prices, all prices below are plus PP fees and shipping if not...
Just recently purchased and installed a DDM tuning HID kit 9007 hi/low 55w. The problem right now is that i can't get the hi/low function to work properly. The regular lights work fine. At first i had the wiring to the stock harness plug set up so the low beams worked but the high beams would...