bmr

Looking to buy A set of BMR lowering springs. I am also interested in panhard bar and rear LCA relocate brackets. Let me know what ya got. Thanks!

Well I’ve seen a lot of questions about what people should do for better 60’s and what they should go with to beef up the drivetrain so I figured I would share what I’ve done. My power level, mods etc is in my sig. Last season I snapped my axle on a well prepped track on 17” Hoosier slicks...

I have a BMR Rear Tunnel Brace with Safety Loop that will fit 05-14 GT. I received it as a gift, but it won't fit my car, It's brand new and has just has been sitting in the garage for the past year and a half. Asking $100. Here is a link to the safety loop from American Muscle. Let me know...

Don't miss out on our end of the year deals on suspension products from BMR and Viking. 15% off all items from these brands. If you have any questions feel free to send a message or call us at 1-855-827-7223. http://www.teambeefcakeracing.com/bmr-suspension.html...

Don't miss out on our end of the year deals on suspension products from BMR and Viking. 15% off all items from these brands. If you have any questions feel free to send a message or call us at 1-855-827-7223. http://www.teambeefcakeracing.com/bmr-suspension.html...

Today is the day to save $$ on UPR, Viking, and BMR with our 15% off sale. NOW is the time to get a UPR catch can at a great price! * No Coupon Necessary * All Ford 1979-2018 models * Suspension, Interior, Exterior, Engine etc.. Call 1-855-827-7223 or message us direct...

For sale is a pair of lightly used BMR Lower Control Arms, part number: TCA021. Red in color. Poly and rod-end combo. On-car adjustable. Used for about 1000 miles. Compatible with the S197 body style (05-14). $219.95 new from BMR. Asking $175 shipped to the cont. USA.

Plate Shift Installing BMR Suspension’s caster/camber plates for the S550 By Steve Turner Photos by Steve Turner and courtesy of BMR Suspension From the jump, the crew at BMR Suspension took the S550 platform and started developing parts. Despite the platform maturing and other development...

Anybody running these springs? I am mostly on the street but at over 700rwhp even on a roll it can be hand full... Just curious if anyone has tried them and what t the feedback is on them, thanks.

GT350 Growl Lethal Performance upgrades its Shelby with a Magnaflow cat-back and more By Steve Turner Photos by Steve Turner and courtesy of Magnaflow Born with an dual-mode exhaust from the factory, the Shelby GT350 is already one of the best sounding Mustangs ever built. That’s especially...

I have a brand new k-member and chassis brace from BMR for a 2011-2014 Mustang. They were installed and then immediately de-installed because of clearence issues caused by the large 1 7/8 Kooks headers. The steering column would scrap hard against the headers, so unfortunately we had to take it...

Okay, I have a Paxton 5.0 ordered drag radials and lca relocation brackets. After I put the brackets on you feel the rear end kick out to the right when I let off the gas or when downshifting to a stop. Also when doing wot pulls it's straight until I let off the gas then the same thing happens...

Koni Sport Adj Shock and Strut Kit Koni sport shocks (2) Rear 8741 and (2) Front 1494 Sport for 2005-2010 Mustang, including GT500 up to 2014. Brand new in box, never installed. $600 plus shipping

Bought these for the sole purpose of only using the rears when I had a tire bigger than what my Sportlines could clear. 1.5" Drop SP009 BMR Springs $249.99 new. $210 shipped in the US! Buyer pay's fee's or gifts. 615-574-1683 Easiest way to reach me is to shoot me a text! I can get you...

I am looking to lower my car. So if you have parts for sale hit me up with a PM.

VMP Tuning end of the year shop blow out! All of this is stuff that we have laying around the shop that was either used for R&D, ordered for a customer’s car that didn’t end up following through, or used as a trade in by a customer. All prices are plus shipping unless local pick-up...

Hello I am a Mustang driver from Germany and I have a question about my BMR LCAs, UCA and PHR. My Mustang is a 2011 GT. I want to replace the BMR bushings to Energy Suspension bushings. Unfortunately, I do not know the size of the bushings. :nonono: Can anyone tell me the dimensions of the...

Used, but in great condition. Around 12-15k miles on them. Swapping to a different spring setup! Don't have any pictures of the springs themselves because I haven't gotten them off the car, but here's a few pictures of my car to illustrate the drop. Believe Eibach states 1.4"/1.7"? It's about...

I don't know what it is. But my car has developed a "squeak" sound when turning to the left ONLY and when you hit small bumps or go down the slightest rough road. Doesn't do it when turning to the right, and quits completely when you hit the brakes. Jacka$$es at the stealership told me "it's...

So I just got this car. Love it. Lowered on Sportlines, has been for over 10k miles. ( I knew previous owner ) Rear has Strange 10-Way Shocks, Front is stock. Only makes this noise when you turn to the right or go around a curve to the right and over slight bumps! It's nothing bad, but it's...

Either of these would do. Just name in the sig or something cool with it i'd appreciate it!!

I'll just post up what i'd be intersted in and lmk whatcha got. * '05-'10 Koni STR.T Shocks Struts * '11-'14 Koni Yellow Shocks Struts * GT500 Strut Mounts * Steeda HD Mounts * CC Plates Possibly Strange Adjustable Front & Rear or Blistein, maybe Tokico D-Spec I haven't really read up on...

Bought BRAND NEW from Stangmods.com Didn't use when I installed my BMR springs because I didn't need the extra adjustment. Pretty much bought just out of pre-caution. Lmk. Paid $50, asking $30, buyer pays shipping but once again, box only weighs MAYYYBE 2lbs. So. PM or post here.

I currently have the BMR non adjustable lower control arms and a DDS 1-piece CV driveshaft. Even with the Hoosier QTP 28x11.50x15 I'm getting slight wheel hop on the street. I plan on getting CJ springs, strange adj. shocks and struts. Will that take care of it or should I also get the...

I hate to spam the forum but i have a new question! I am strongly considering replacing my stock LCA's and UCA's with aftermarket ones. What is everyone running? I am on a budget also. I am thinking either BMR's or BBK's because they seems to have good reviews, are cheap, and have greasable...